это короче как vcr osd mono но лучше.
this font is like vcr osd mono but better.
This is a clone of 12x16 iskraThis is another clone of Monkey (my monospace lanky font); it should be very similar to the original except for the lower x-height and the added accented characters (More Latin/Latin-1, Latin Extended A, Latin Extended B, and now Even More Latin/Latin Extended Additional). It is 16 blocks tall and 6 blocks wide; all letters without diacritics are at most 9 above the baseline and at most 3 below, but the accents push the height of a letter up by 3 blocks (or rarely 4), and the box drawing characters extend even higher, to 16 blocks from descender to the highest point. This font uses the FontStruct 2x2 filter method with plenty of composite and stacked bricks, which lets the curves look good at large sizes while remaining sharp on the screen at normal sizes. Mandrill will look strange in the FontStruct preview if you zoom in or out, but if you download it, it will look sharp at size 16 or 12 (depending on the program).
This is a clone of MonkeyA multi-line design which is slightly reminescent of mazes/fingerprints. It's not designed to create functional mazes, but it is somewhat capable!
"Absinthelyric Print" is an anagram for "Labyrinthine Script".
*
Original size: 11.25pt. Use multiples of this value for pixel perfection. (If you use antialiasing, it will look perfect at most any size.)
*
Design rules:
1. Square bricks and 90-degree angles only.
2. Alphabetic glyphs must have open terminals; numerals and symbols must have closed terminals. Letters which do not terminate (D,O, etc.) must be broken so that they terminate.
3. Glyphs must fill the 15x15 grid.
4. Ligatures and combinatorial glyphs must fit into one letter's space.
5. Draw from the outside in.
Based On The Structurosa Font By @pauldhunt.
Also Based On The Small FS Logo PNG On The Bottom Of This Page.
This is a cloneA FUTURISTIC LETTER “A”!!
MY FUNNY LETTER “K”!!
AN OVER-EXTENDED EM DASH!!
WEIRD UPSIDE-DOWN CYRILLIC LETTERS THAT NOBODY’S HEARD OF!!
IT’S ALL HERE IN MY NEW FONT — ALDRON.
I THOUGHT THAT THIS FONT NEEDED MORE ATTENTION THAN THE ONE THAT I CLONED IT FROM, WHICH WAS MADE IN A COUPLE OF HOURS. AS WELL AS ADDING THE LATIN AND GREEK ALPHABETS, I MADE A FEW ADDITIONS AND ADJUSTMENTS TO THE CYRILLIC LETTERS AS WELL AS SPACING. AND UNLIKE ITS PREDECESSOR, THIS ONE IS KERNED.
IT WAS QUITE A DIFFERENT EXPERIENCE, ACTUALLY, ADAPTING A CYRILLIC FONT FOR LATIN INSTEAD OF VICE VERSA.
INTENDED LANGUAGE SUPPORT
• БЕЛАРУСКАЯ МОВА — BELARUSIAN
• БЪЛГАРСКИ — BULGARIAN
• HRVATSKI — CROATIAN
• ČEŠTINA — CZECH
• ENGLISH
• ESPERANTO
• DEUTSCH — GERMAN
• ΕΛΛΗΝΙΚΆ — GREEK
• ITALIANO — ITALIAN
• ҚАЗАҚША — CYRILLIC KAZAKH
• МАКЕДОНСКИ — MACEDONIAN
• TE REO MĀORI
• ROMÂNĂ — ROMANIAN
• РУССКИЙ — RUSSIAN
• SRPSKI, СРПСКИ — LATIN AND CYRILLIC SERBIAN
• SLOVENČINA — SLOVAK
• SLOVENŠČINA — SLOVENIAN
• УКРАЇНСЬКА — UKRAINIAN
AVAILABLE CHARACTERS (★✰*ALL KERNED YAY!!!!!✰*✪)
LATIN: ABCDEFGHIJKLMNOPQRSTUVWXYZ ĀÁÂÄĂĆČĈĎĐDŽĒÉÈǴĜĤĪÍÎĴĹĽLJŃŇNJŌÓÒÔÖŔŘŚŠŜȘẞŤȚŪÚÜŬŮÝŹŽ
GREEK: ΑΒΓΔΕΖΗΘΙΚΛΜΝΞΟΠΡΣΤΥΦΧΨΩ ΆΈΉΊΪΌΎΫΏ
CYRILLIC: АБВГДЕЁЖЗИЙКЛМНОПРСТУФХЦЧШЩЪЫЬЭЮЯ ӘЀЃҐҒЂЄЅЍІЇЈЌҚЉҢЊӨЋЎҮҰҺЏ
THE NUMBERBET: 0123456789
PUNCTUATION: ()[]!?.…:;,„“”‘’-—«»*• AND OF COURSE, SPACE
From the Final Fantasy Advance and DS games. Specifically the final version, from FFIV DS. I tried to make it compatible with all languages that use Latin, Cyrillic, and Greek scripts. Plus Japanese Hiragana and Katakana.
If you see problems, let me know.
CHANGES FROM IN-GAME ORIGINAL:
•Added additional letters and diacritics.
•Changed the circumflexed letters to use actual circumflexs instead of inverted breves, so I could add breved letters.
•Used half-pixels to center diacritics over letters.
•Made some diacriticized letters more consistent.
Download this font only in Mac
Unicode® 16.0.0
Unicofonte is a sans-serif typeface which is designed by marcot_0425, not_cake, & Sed 4 type foundry for the Fake Bézier curves(geometric shapes only).
Latest update (v7.0.0):
March 3 at 11 a.m.:
Updated Cyrillic Omega Titlo and OT
Updated L with accent marks (especially L with stroke [small] as it looks like a T)
Fixed u0020 (spacebar)
I've updated tone six (looks like a cyrillic hard sign)
I've updated Cyrillic multi-eyed o (10 eyes) and F with stroke (Ua798) (looks like French franc symbol)
Fixed some bugs
Fixed all Latin extensions d character (a7d5) and medival exclamation and quesion mark(2E53-4)
Fixed Thorn with stroke
i used a diagonal brick to make it
Sun 24 Dec:
Today I added latin/greek/cyrillic unicode 16.0 chars
26 Dec 2023:
Better Kerning
Fixed most of the errors that I found
Version 1.3: Added Polish.
* $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥
Another simple experiment with composites, this time trying to make a font which can easily accomplish a "diamond encrusted" or "disco floor" style effect within my graphics software.
SPOILER: I succeeded. :D
* $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥
This is a cloneFont made for the logo of a particular project/video game of mine.
Some kerning pairs are imperfect... I can only bring them 10 bricks closer together, so a bit of space remains...
*
Current Version: 1.9
See also:Dynablaze
A better version of BM MINI with much more characters. Compatible with English, French, Spanish, Italian, Dutch, Norwegian, German, Portuguese, Hungarian, Danish, Swedish, Icelandic, Finnish, Vietnamese, Russian, Belarusian, Serbian, Ukrainian and Macedonian.
Alternate take on Nirvanite, this time with bullseyes rather than solid circles as the large segments.
This one is a lot more organic than its predecessor, but also a lot more confusing. Looks like clusters of alien tadpole eggs to me!
This is a clone of NirvaniteA 117-segment display made to have a more "mosaic" look. Try using this one at odd sizes, especially with antialiasing off! The resulting distortions occur in a consistent way which leads to many new uses for the font.
Original size: 38pt
The main font used by MARENGI Omnisystems in my video game series, "Endless Sea Of Stars". These letterforms can be found engraved into or projected onto practically every piece of MO technology. This script was designed in 2011 to be suitable for printing, logo design, art, and many other purposes. It lacks the constant height which most of my other pixel fonts have, but makes up for it with its bookish appearance.
Unfortunately, replicating the exact design of the antialiased version of this font is impossible, not only on FontStruct, but on all software other than ESOSVM. This is because ESOSVM uses a custom renderer which makes use of proprietary techniques. Marengi HD comes close, but not very.
------------------------------------------------------------------
Versioning:
2.6 (19Aug2018) - "bdďđ" were perfected. Space width reduced.
2.5 (20Jul2018) - "IÌÍÎÏø" were perfected and massive kerning work began.
2.4 (15Jul2018) - "J" was perfected and several letterwidths were altered.
2.3 (18May2018) - "hnru34679ÀÁÂÃÅÈÉÊÌÍÎÏÑÒÓÔÕØÙÚÛÝÞßàáâãåæçèéêìíîïñòóôõøùúûý" were perfected.
2.2 (17May2018) - ":;gjty%/\ÂÆÊÎÔÛâæêîôû¼½¾" were edited for more consistency and readability.
------------------------------------------------------------------
MIV: 8.74
Original size: 11pt (use multiples of this value for pixel perfection)
------------------------------------------------------------------
Mojang font
For Minecraft Java Edition 1.13 or newer versions
Моджан шрифт.
Для Майнкрафт джава 1.13+
This is a clone of Cyrillic Mojang Font (Beta)The 5x5 pixel font used for the Virtual Gremlin, an old emulator/game I wrote. The standard font for ingame text.
This font was also designed to work well with IRC clients and ASCII games (see sample).
Breaking the 5x5 grid was unfortunate but necessary in order to make legible characters in non-Latin languages.
Inspired by Briem Script.
I am very proud and happy that I have been awarded a staff pick starfish. ⭐️
Arabic is basic, only Arabic and Urdu are supported. Alternate samvat forms for 2, 3, and 5 digit years are in PUA. If you wanna remove the notch in the U+16AEC, then use U+E000.
Only lowercase Georgian mkhedruli is supported.
My ratings dropped from 9.10 to 8.57??? omg these trolls are ANNOYING
@AFontAbove No, this is Patrick.
If you have any suggestions for optimization/support, feel free to drop them in the comment section
This is a heavily edited version of the font Meander (1972) by Maxim Zhukov
Full/Partial support for: Belarusian, English, German, Greek, Russian, Serbian (Cyrillic), Turkish, Ukrainian
Planned support for: Spanish, French, Scandinavian languages
This is a cloneExperimental 24-segment display or massive monochrome Mondrian matrix. Pixel compatible!
The thinking behind this one was that with incongruously sized segments arranged in the proper way, I would create a design which was effectively 5x5, but which accomodated more glyphs than 5x5 usually does. Negative space is incorporated into the structure of many glyphs, though not enough to classify this as an IVO design.
"Qualtron" is the name of an imaginary entity that a friend believed in - a being meant to represent the result of "a mathematical equation that can rule the universe". I didn't inquire further about it... :D
*
Design Rules:
1. Segments can have interior length/width of 2 or 5.
2. The central 2x2 square must always remain open.
3. Square bricks and 90-degree angles only.
*
Original size: 20.75pt (use multiples of this value for pixel perfection)
First attempt at a cursive pixel font. The name derives from an old joke band, whose name is itself a parody of the name of a toy gun by BoomCo, the "Rapid Madness".
Original size: 12pt (use multiples of this value for pixel perfection)
VERSION HISTORY:
09 Mar 2018 - v1.0 released.
10 Mar 2018 - v1.1 released.
13 Mar 2018 - v1.2 released. More Latin support added. The capital letters were cleaned up to make them nicer-looking when appearing in isolation. Excess spaces/lengths of line were reduced to make for denser-looking, more naturally handwritten words.
02 Apr 2018 - "More Latin" and "Google Fonts Basic" ranges finished. More shortening/optimization done for the extended Latin letters.
I attempted a blackletter style without any knowledge or references. The result reminds me of a vampire's writing!
The name "Dethzmezenger / Death's Messenger" comes from one of many old joke bands which I created.
Original size: 17.25pt (use multiples of this value for pixel perfection)
This was a tiny bitmap font for a game.
Then I added a bunch of glyphs to support most European languages: Spanish, French, German, Portuguese, Czech, Polish, Turkish, Russian, Ukrainian, etc.
Then, inspired by a recent trip to Georgia, I added Mkhedruli characters just for fun (never really saw a pixelated Georgian font before, so I figured, why not).
And so now this exists.
Also, check out Eneminds Thin for the non-bold version of this font.
Version 1.6
An attempt to make a "classroom" font. It reminds me of a font style which was once commonly used on magnetic letters.
*
See also: Hydrangea Unicase
An extension of ideas present in "Gehenna".