Ehonore-

My first unique font. It's original, sometimes cartoony, and stylish.

Ehonore (Version 1.0) contains:

all -"Basic Latin",

-"More Latin", and

-"Google Fonts Basics"

Characters, as well as romanian special characters T & S with comma, and hungarumlaute. (double-acute O & U)

This font is free to use, mayble I'll even set it up for Google Fonts...

I hope you have fun.

Inspired by my friend Ehre. 

Update 1

I decided to improve some characters, and I'm happy with the results.

I made some lowercase letters smaller, plus I changed some letters which bothered me, by looking too "cartoony".

--------------

Update 2

Russian letters are finished, if you have any special requests for characters, just tell me. I hope I'll be adding more cyrillic letters in the near future.

MOS 2018

MOS 2018 /moʊz twɛntɪ eɪtin/ is a minimalistic, designy font aiming to simplify English lowercase letterforms as much as possible while keeping them recognizable to some degree, using a 3x3 grid.

Bookish pixel font designed for general reading. Made for use in my own future web designs.

Version 14

My attempt at a small-form polygonal sans-serif. This is based partly on the 16-segment circle I used to make "Circlets" and "Misplaced Baubles".

one of microsoft pre-installed font "Broadway"  inspired me. However, fs is not a good tool for curves. I got it great in my way.

Pixellated Proxima Punch. It's art deco for your ancient compy box! New smaller grid, same great taste.

Original size: 6pt. Use multiples of this value for pixel perfection. However, this one has been noted to look great at almost every smaller size. Try 7pt, 8pt, 9pt, etc. for slight variations on the look!

A semi-bold Diabolicious. It is the same width and size as the original!

Original size: 5.25pt (use multiples of this value for pixel perfection)

Recommended: Use with kerning turned ON!

Pixel gothic somethingorother. Diabolical + Malicious = Diabolicious.

Original size: 5.25pt (use multiples of this value for pixel perfection)

Recommended: Use with kerning turned ON!

My attempt at a headliner font. This is made to look very regular, even "generic", but also very clearly readable - the sort of font you might expect to see in advertising agencies, publishing houses, hospitals, and government buildings.

Uppercase only.

Use with kerning turned ON!

Lowercase only!

This font used to be the lowercase for Spacekapitan. I cloned Spacekapitan so I could keep this, then reworked Spacekapitan into what it is now. Then I continued working on this font to make it the best it could be, and here we see the result. It has almost nothing but 90-degree angles.

This is mostly built around a 5x5 square which makes its way into most glyphs in some way or another.

I think this would make a good companion font for "Your Quota".

Stylized 5x5 pixel font. Tiny but power-packed!

I designed it to have a slightly balloon-esque, oldschool arcade look. Feel free to use it in your games :D

This is also designed to answer the question of whether tiny pixel fonts can have distinctive styles that haven't been seen yet. Of course they can! See the 5x5 Collection for many more.

Original size: 7.5pt (use multiples of this value for pixel perfection)

Original size: 6.75pt (use multiples of this value for pixel perfection)

Design Rules:

1. Square bricks only.

2. A 1px soft border of negative space must exist between lines whenever possible.

3. Glyphs must fill the 9x9 grid to the greatest extent possible.

4. The set of glyphs shall be a heterogeneous mix of symmetrical and asymmetrical forms.

5. Negative space will replace positive in any situation wherein the small grid size or the geometry of a letterform would be detrimental to the chosen style. This includes all situations where any shape lacks at least a soft 1px border of negative space around it.

See also: Terran Pixelcruiser

Fontstruct's first vacuum tube font!

This is a design inspired by Nixie tubes. Since these "tubes" are iconographic, they could theoretically represent 12AX7s, 6L6s, KT88s, or whatever tube/valve you wanted. Feel free to clone and build on this concept.

"N" and "Z" are made to look like bolts of electricity.

24-segment display. This one belongs to a small family called Calculatrix.

Like Calculatrix 12, this one is spaced so that every segment appears in its proper place, as if the text were being rendered on one giant display. (If using this in your own software, you will want to check the line spacing as it can vary depending on the software.)

I suppose this font could be used for weaving or embroidery work, as well... it has that look about it...

TIP: Try zooming out while already at Pixel size!

I attempted a blackletter style without any knowledge or references. The result reminds me of a vampire's writing!

The name "Dethzmezenger / Death's Messenger" comes from one of many old joke bands which I created.

Original size: 17.25pt (use multiples of this value for pixel perfection)

A multi-line design which is slightly reminescent of mazes/fingerprints. It's not designed to create functional mazes, but it is somewhat capable!

"Absinthelyric Print" is an anagram for "Labyrinthine Script".

Original size: 11.25pt. Use multiples of this value for pixel perfection. (If you use antialiasing, it will look perfect at most any size.)

Design rules:

1. Square bricks and 90-degree angles only.

2. Alphabetic glyphs must have open terminals; numerals and symbols must have closed terminals. Letters which do not terminate (D,O, etc.) must be broken so that they terminate.

3. Glyphs must fill the 15x15 grid.

4. Ligatures and combinatorial glyphs must fit into one letter's space.

Balloon/block style pixel text...

Original size: 18.5pt (use multiples of this value for pixel perfection)

* $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ 

Another simple experiment with composites, this time trying to make a font which can easily accomplish a "diamond encrusted" or "disco floor" style effect within my graphics software.

SPOILER: I succeeded. :D

* $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ 

Made on a whim as a result of rediscovering an old design (see sample).

It's pixel perfect at 12pt, 24pt, 36pt, etc. :^)

Since the inspiration image had only uppercase in it, I took some style liberties with the lowercase. The result is mildly comical!

Currently Supports:

- English
- Some Latin
- Russian Cyrillic
- Google Fonts
- Georgian
- Hebrew
- Armenian
- Greek/Coptic (WIP)
- Thai
- Currency Symbols
- Arabic (WIP)

A style built on a tall ellipse. Bold line on the left, narrow line on the right. (The glyphs )]}¿¡ break this rule for the sake of aesthetics.)

See also: Proxima Punch Pixel

A variant of the Tronic font lineup.

I used Tile Molester (I didn't name it that way!) and extracted the Earthbound and Mother 2 font (English ROM and Japanese ROM) that was used in the game's menu and tried to combine and insert them here myself. (I used the Earthbound's Latin instead of Mother 2's bolder one, because most recognize it that way) 

I've added a few hundred more glyphs to it, hoping this may come in handy for some fans out there. ^^ I'll add more languages (maybe use all the glyphs available) if you request it, otherwise, I'll only leave it at 878 glyphs. ;D

This font includes:
- Basic Latin
- More Latin
- Extended Latin A
- Extended Latin B
- Katakana
- Hiragana
- Greek and Coptic

To reference the game a little more... Katakana Middle Dot, More Latin's Middle Dot, and More Latin's Bullet are actually the middle dots that you see in the Japanese and English character naming screen, respectively. ^^

I don't have status conditions and the battle font in here, because it's pretty much its own font and I honestly can't find it in the game's file for some reason... (no clue what settings to use see those)

If you want to know, A,B,P,S.... are (head)3:1(body). 

MOST OF letters are 12x6 except I,T,Y,f,i,l,m,t,y

I've made the numbers thinner. i d even k y. but they look better like this

What about Long leg font? do you guys want a "Long Leg"?

[slashes](Problem solved)

are \  / % ø recognizable? thanks to Se7enty-Se7en and Cookielord, \/%Ø is now better.

THANK YOU  \(◦'⌣'◦)/❤❤❤

[ogonek and stroke] (Problem solved)

ogoneks and strokes are annoying me. btw if you're speaking languages with letters that has ogonek or stroke sticked on. try to write a word with ogonek or stroke and remove the ogonek or stroke. and then recognize them

if you CAN. then why do you even put it on?? ¯\_(૦ઁᗝ૦ઁ)_/¯

coment below plz i need to know. :)

[asterisk]

if you don't like it, clone it you lazybone!

[Tags]

I don't speak english well, so plz tell me what is the tag this font should have. :)

[PROBLEMS]

Problems with "greater than" and "lesser than"

Doesn't Support "~", Upper-case "ß"

[THINGS TO KNOW]

more Latin 90% complete. There's still few symbols not complete yet, If your need the symbols to be completed. Please leave a comment. thank you :)

I didn't put the lil' spikes on the side to the Thai letters, if you want them (the lil' spikes) to be there. Comment below to tell me :)

[COMPLETED SYSTEMS]

Russian Cylliric, Basic Latin, More Latin 

[NOW WORKING ON]

Making Thai letters now,

Making Armenian letters too :)

[MY WORDS]

CLONE OF "HELEN MARIE", I DIDN'T MAKE THIS. MY GOAL IS OVER 60% LATIN LETTER SUPPORT, CYLLIRIC, GREEK

Oringinally Created By Elzero

Origin Version Link : https://fontstruct.com/fontstructions/show/1468188/helen-marie

I was pretending to make this just for personal use, but I liked it so much that I decided to make a lot of glyphs and share with you guys!

Hi, I'm description :)