A multi-line design which is slightly reminescent of mazes/fingerprints. It's not designed to create functional mazes, but it is somewhat capable!
"Absinthelyric Print" is an anagram for "Labyrinthine Script".
*
Original size: 11.25pt. Use multiples of this value for pixel perfection. (If you use antialiasing, it will look perfect at most any size.)
*
Design rules:
1. Square bricks and 90-degree angles only.
2. Alphabetic glyphs must have open terminals; numerals and symbols must have closed terminals. Letters which do not terminate (D,O, etc.) must be broken so that they terminate.
3. Glyphs must fill the 15x15 grid.
4. Ligatures and combinatorial glyphs must fit into one letter's space.
5. Draw from the outside in.
Calculator font with a 7-segment display. This should bring many of you back to school, but in a good way, I hope.
This one belongs to a small family called Calculatrix.
I've allowed "MWmw+" to break the grid because they were impossible to render otherwise...
Did/do you ever use oldschool calculators to write funny messages? Post your best calculator words in a comment! :D
Version 1.3: Added Polish.
* $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥
Another simple experiment with composites, this time trying to make a font which can easily accomplish a "diamond encrusted" or "disco floor" style effect within my graphics software.
SPOILER: I succeeded. :D
* $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥
This is a cloneFont made for the logo of a particular project/video game of mine.
Some kerning pairs are imperfect... I can only bring them 10 bricks closer together, so a bit of space remains...
*
Current Version: 1.9
See also:Dynablaze
A pixel font which combines four experimental techniques at once:
1. Structurally disconnecting the stems from the open parts of letters.
2. Allowing glyphs to extend beyond the reaches of width and starting position.
3. Designing glyphs specifically to connect and form new shapes, rather than simply allowing shapes to emerge from existing characteristics.
4. Designing glyphs so that the overall font is free of a need for kerning.
*
Alternates are now on UPPER CASE. I'll continue to update this as I get more ideas!
*
Original size: 6.75pt (use multiples of this value for pixel perfection)
Version 1.3: Added Polish.
*
Another asymmetrical sans-serif made for use in rulebooks for the Freeform Limitless Adventure Kit (FLAK) pen-and-paper game system. This one is classed as a hybrid and works well at all point sizes!
It began as a Constant Height design, but now I don't classify it as such since most of the letters with diacritics are taller than those without. A few letters (eszett, thorn, eta, etc.) are allowed to descend slightly, as well.
This font has also found some use on signage at a friend's bistro!
I decided to make a design which incorporated the thinnest/lightest weight lines possible in FontStruct. This is the result; I'll add more if people like it.
These 1/32 lines cannot be accurately nudged, so a unique line has to be built for each vertical position where I want a line. These lines also cannot be centered on a place where two curves meet (such as the middle of B or R). This introduces some unintentional asymmetry to the design, but I like it, so I'll keep it.
There is also the problem that forming a diagonal line of the same line weight is nearly impossible. While angled 1/32 lines can be formed, their angles are all close to 0. No method exists for making a line which slants at 45 degrees while also being 1/32 weight. So, I had to make some thicker lines in certain areas. I don't think they detract from the design, but if you scrutinize this enough, you'll notice them.
A variant of Marrada with more angles.
Usually with designs I try to make every part look like it "belongs" with the others as opposed to trying to make each part look its best. With Marrada, I struck a balance between the two. Q1@*&{} are probably the best examples of this sort of balance...
This is a clone of MarradaSmall-grid doodle which creates new combinatorial forms.
I considered this design rather rough and unappealing until I gave it negative spacing. This caused the forms to merge together in unpredictable and interesting ways. The lesson here is that sometimes the metrics, not the aesthetics, are what "make" or "save" a design.
A pixel art galaxy. 27*27 canvasses.
There are 12 distinct fonts lurking within this one. Spot 'em all and win a FREE Nothing!
Original size: 20.25pt (use multiples of this size for pixel perfection)
*
-= LEGEND =-
A - Space Shuttle, B - Planetoids, C - Alien, D - Space Station, E - Pulsars, F - Satellite/Telescope, G - Planet & Moons, H - Kempler Rosette, I - Bar Sign, J - Space Bar, K - Interstellar Planet/Dark Star, L - Double Sun Planet, M - Globular Cluster, N - Earth, O - Galactic Plane, P - Asteroids, Q - Alien in Saucer, R - Black Hole/Wormhole, S - Globular Cluster, T - Dyson Ring, U - Giant Star, V - FS Nebula, W - Nyan Cat, X - Starship Enterprise, Y - Star-Forming Region, Z - Planet & Rings
a - Space Armada, b - Dr. Wily, c - New Stars, d - Binary Star System, e - Colliding Galaxies, f - Space Pirates & Mothership, g - SpaceX Roadster, h - Colliding Planets, i - Space Drone/Probe, j - Colony Ships, k - Ringworld, l - Halfmoon/Destroyed Planet, m - Uninhabitable Planet, n - Solar Wind, o - Wrecked Spaceplane, p - Escape Pods, q - 'Oumuamua, r - Moon, s - Molecular Clouds, t - Navigational Buoy, u - Marx, v - Substellar Companions, w - M57 (Ring Nebula), x - Space Lodge, y - White Dwarves, z - Death Star
0 - Big Star, 1 - New Spiral Galaxy, 2 - Old Spiral Galaxy, 3 - Supernova, 4 - Exploded Star & Nebula, 5 - Planet X, 6 - Quasar, 7 - Cruiser, 8 - Hypernova, 9 - Gas Giant
+= - Space Hotdogs & Food Sign, / - Planet & Comets, ; - Gamma-Ray Burst, : - High-Tech Planet, ' - Dense-Atmosphere Planet, " - Space City, £ - TARDIS, € - Sinistar
.,?!@#$%^&*()-_{space}{nbsp} - Starfields & Map Markers
*
I add new art to this whenever I get more ideas. But I don't want the legend to be any longer than it is, so I leave the others for you to discover on your own.
Alternate take on Nirvanite, this time with bullseyes rather than solid circles as the large segments.
This one is a lot more organic than its predecessor, but also a lot more confusing. Looks like clusters of alien tadpole eggs to me!
This is a clone of NirvaniteTHE MOMENT YOU STEP INTO SPOOK MANSION, YOU REALIZE YOU DONE GOOFED UP. THE DOOR SLAMS SHUT BEHIND YOU AS SCARY PIANO MUSIC BEGINS TO WASH OVER YOU AND TERRIFYING KICK DRUM SOUNDS BEGIN TO PUMMEL YOU. WITHIN MOMENTS, YOU ARE DROWNING IN A SEA OF EERIE AMBIENCE. "WOE BETIDE THE FOOL WHO CONSPIRES TO TAKE MY RICHES!", SHOUTS A GHOSTLY VOICE SOMEWHERE BEHIND YOU. YOU TURN, BUT NOTHING'S THERE. BOO! LOL....................................................
Some kind of great big ol' chain.
In retrospect, I think it looks like a jewelry chain from a dwarven civilization. Perhaps the hypothetical jeweler cut and ground the stones in an imitation of some dwarven font!
When glyphs are used in isolation, they somewhat resemble carved signets or seals. Increasing the letter spacing allows you to create a variation of the design. (This is something that must be done in-software since the font will render as monospaced by default.)
*
12SEP2018: Added lowercase... the low resolution combined with the design method make it very difficult to render distinctive lowercase versions of every letter, but I'll keep working on it. There's a lot of similarity between pairs like S/5, Z/2, etc., so this font is most effectively used in forms of writing wherein context suffices to inform the reader as to the identity of each glyph (lists, prose, and technical writings). If you want to use this in a password system or something, I recommend using one case's glyphs only.
*
Design Rules:
1. Negative spaces will be areas of 0.5 bricks' effective length or width.
2. Negative spaces may exceed the 0.5 measurement only by increments of 0.5 and in only one dimension at a time.
3. Glyphs will fill their framed canvasses to the greatest extent possible while adhering to the other rules.
Version 1.1 - Added Polish.
*
A font for times when Immersive Mode is turned off. This is used for documents and signage within the Euphedoran Extradimensional Research Institute situated in Euphedora, Greater Azwelkeland, Planet Ashr within ESOSVM.
EERI is known for Fengmiao Fukota, Salva Dheen and Triste Marinan, three of ESOSVM's most-learned and chronologically oldest AI characters. The lattermost of these is often consulted (through a software called MIDAS) for analysis which I use to improve the readability of certain fonts.
Version 0.5
*
A font made for a LuneKnight, a Terraria mod by yours truly. It gets its name because parts of it remind me of halberd, partisan, and/or axe heads. I designed this to have the vaguely authoritation look of a Didone as well as a borderline-gaudy look that prevents this from being taken too seriously. These changes lent some much-needed character to the prototypical Didone from which this design evolved. The uppercase letters are more heavily ornamented, as if to suggest that they are letters from an illuminated manuscript.
The main texture is a diamond pattern inspired by vent holes in medieval armor. These were often made with a square punch, and help the font look more handmade. Actually, most of the quirks this font possesses are present to help present a handmade look.
*
Notes
The wider letters are incised, which seems to lessen their perceived wideness by breaking up the shapes. For me this effect lent a more natural flow to the reading.
The ornamentation rules are complicated and factor in lettershapes, English letter frequency, and the existing design parameters. One thing I can concisely explain is that glyphs which normally look fairly plain are ornamented to such an extent that they make others look plain instead (CGJLT1 among others).
Experimental 24-segment display or massive monochrome Mondrian matrix. Pixel compatible!
The thinking behind this one was that with incongruously sized segments arranged in the proper way, I would create a design which was effectively 5x5, but which accomodated more glyphs than 5x5 usually does. Negative space is incorporated into the structure of many glyphs, though not enough to classify this as an IVO design.
"Qualtron" is the name of an imaginary entity that a friend believed in - a being meant to represent the result of "a mathematical equation that can rule the universe". I didn't inquire further about it... :D
*
Design Rules:
1. Segments can have interior length/width of 2 or 5.
2. The central 2x2 square must always remain open.
3. Square bricks and 90-degree angles only.
*
Original size: 20.75pt (use multiples of this value for pixel perfection)
A semibold Gongclonker made to the same specs as the original - 5x5 with no wasted matrix.
This is a clone of GongclonkerVersion 1.3: Added Polish.
*
This font used to be a normal Decolike... until someone decided to chow down on it! They seemed to prefer the taste of spurs, as all of them have been bitten off, leaving only semicircular impressions.
"Nervousa" is an anagram for "Ravenous".
Version 1.6
An attempt to make a "classroom" font. It reminds me of a font style which was once commonly used on magnetic letters.
*
See also: Hydrangea Unicase
10x10 fantasy- and RPG-related icons. The bigger they are, the better they look!
This is finished! I'm happy to hear out and possibly implement others' suggestions, though.
*
A - Knight's Blade
B - Warrior's Shield
C - Paladin's Helmet
D - Samurai's Armour
E - Wizard's Potion
F - Thief's Keys
G - Monk's Rosary
H - Dwarf's Pickaxe
I - Necromancer's Scroll
J - Sorceress' Staff
K - Shaman's Totem (Spider)
L - Ninja's Glove
M - Assassin's Bow
N - Cleric's Holy Symbol
O - Viking's Hammer
P - Bandit's Buckler
Q - Barbarian's Axe
R - Druid's Mandrake
S - Priest's Altar
T - Jester's Crowns
U - Warlock's Book of Shadows
V - Witch's Lantern
W - Dancer's Lei
X - Hypnotist's Charm
Y - Miner's Hat
Z - Explorer's Map
a - Trapper's Caltrops
b - Demolitionist's Arsenal
c - Vampire Hunter's Boomerang
d - Herbalist's Bag
e - Archaeologist's Fossil
f - Goblin's War Trumpet
g - Gourmand's Platter
h - Musician's Harp
i - Gladiator's Net
j - Oracle's Beads
k - Bard's Singing Sword
l - Spelunker's Rope
m - Merchant's Abacus
n - Gambler's Dice
o - Siege Operator's Catapult
p - Aztec's Warclub (Macuahuitl)
q - Drunken Master's Jug
r - Fighter's Headband
s - Judge's Gavel
t - Guru's Meditation Balls
u - Dungeoneer's Folding Ladder
v - Moneychanger's Scales
w - Cultist's Altar
x - Magician's Hat
y - Friar's Cross
z - Fisher's Harpoon
0 - Skeleton
1 - Kobold
2 - Goblin
3 - Bone Dragon
4 - Pumpkin Head
5 - Slime
6 - Vampire
7 - Imp
8 - Dragon
9 - Mimic
. - Chest
, - Pile of Loot
*
See also: Donjon16, Militaricons, Travelicons
Formerly known as "Specula".
*
By request, a font with the two-toned look of a Pokéball. No filters! The Pokédollar sign can be found on "¢" and a Pokéball is on "•".
"Eviolite" is an item that powers up the defenses of Pokémon that are not fully evolved. Looks like a lavender-colored gem.
A multi-outline design with intentional aliasing.
At the original size, it looks nicely textured. The illusions become more harsh as one zooms in.
*
Original size: 12.75pt (use multiples of this size for pixel perfection)
SPOOKY GHOST FONT. A work in progress. Getting the right spooky apparition look is pretty intensive, but I managed to finish the basic character set before Halloween. :D
*
This started as a 5x5 design. After realizing S and Z would look far better if I made them 1 square taller, I converted the whole font to be roughly 5x6. At this low resolution, it's hard to get the degree of irregularity which I think makes these letters look ghostly... but, the idea is certainly present!
This design seems like it'd fit in with a lot of horror and science fiction stuff, too. Apart from the "smoky"/"ghostly" look, it has a "melted" one which suggests a hot place or maybe immersion in acid. It also looks a bit like slime, and finally at smaller sizes it has a glitch-esque appearance.
An experiment in subtle asymmetry (it's most evident in the upper case).
*
Version 1.7 (14Sep2018) - ExtL-A added, GFB completed, Greek started
Version 1.6 (18Aug2018) - Changed name from "RC Badwolf" to "Badwolf"
Version 1.5 (15Aug2018) - altered 2357,ð
Version 1.4 (14Aug2018) - altered space width and mw
*
See also:Navajo Deco
An experimental design using 1/8 weight lines alongside 1/16 ones. The 1/8 lines are the smallest that can be accurately nudged. Centering them is still a problem at times, and I need a few impossible composites to perfect the glyphs ABEFHKQRXYijkx34789, but overall I'm quite fond of how this doodle turned out.
I think I could use some intensive compositing to get rid of the central dividing line in glyphs like A and H. I'll give it a try when I can.