Searching for more “Display” fonts?
Buy and download “Display” fonts at MyFonts.
Non-unicode Devanagari clip font. It uses the same layout as KF Kiran fons. bha dha tha may look prettier if you use danda instead of a. The design of the letterforms were inspired by Ranjana script.
An attempt to make an entire alphabet by modifying a single heptagon shape. (The "O" is the basis for almost all other glyphs.)
An alternate version of this was made in which I used different bricks to make the width of every line homogeneous. However, it was found that this robbed the font of much of its character. Additionally, the visual effect presented by the increased line width actually made the font less even-looking than it is now. This proved true with and without antialiasing.
Version 0.5
*
A font made for a LuneKnight, a Terraria mod by yours truly. It gets its name because parts of it remind me of halberd, partisan, and/or axe heads. I designed this to have the vaguely authoritation look of a Didone as well as a borderline-gaudy look that prevents this from being taken too seriously. These changes lent some much-needed character to the prototypical Didone from which this design evolved. The uppercase letters are more heavily ornamented, as if to suggest that they are letters from an illuminated manuscript.
The main texture is a diamond pattern inspired by vent holes in medieval armor. These were often made with a square punch, and help the font look more handmade. Actually, most of the quirks this font possesses are present to help present a handmade look.
*
Notes
The wider letters are incised, which seems to lessen their perceived wideness by breaking up the shapes. For me this effect lent a more natural flow to the reading.
The ornamentation rules are complicated and factor in lettershapes, English letter frequency, and the existing design parameters. One thing I can concisely explain is that glyphs which normally look fairly plain are ornamented to such an extent that they make others look plain instead (CGJLT1 among others).
Formerly known as "Specula".
*
By request, a font with the two-toned look of a Pokéball. No filters! The Pokédollar sign can be found on "¢" and a Pokéball is on "•".
"Eviolite" is an item that powers up the defenses of Pokémon that are not fully evolved. Looks like a lavender-colored gem.
A multi-line design which is slightly reminescent of mazes/fingerprints. It's not designed to create functional mazes, but it is somewhat capable!
"Absinthelyric Print" is an anagram for "Labyrinthine Script".
*
Original size: 11.25pt. Use multiples of this value for pixel perfection. (If you use antialiasing, it will look perfect at most any size.)
*
Design rules:
1. Square bricks and 90-degree angles only.
2. Alphabetic glyphs must have open terminals; numerals and symbols must have closed terminals. Letters which do not terminate (D,O, etc.) must be broken so that they terminate.
3. Glyphs must fill the 15x15 grid.
4. Ligatures and combinatorial glyphs must fit into one letter's space.
5. Draw from the outside in.
AZUL is BLUE in Spanish. I choose the word blue because it always reminds me of ultra bold fonts. But i feel like just "BLUE" looks dumb so i choose "AZUL" instead. Btw blue in Chinese is "lan". Just imagine "LAN" as it's name lol.
Least important stuff :
I got this idea when i was thinking about if I design a poster for a JoJo character. it'd be Kira Yoshikage. And I was like "Gotta need a ULTRA bold font to show he's really danger" Now you know this totally unuseful thing :P
A little more important stuff :
This font is free for all use.
DO NOT PRESS THE B SYMBOL WHEN YOU USE THIS FONT. SERIOUSLY, DO NOT
lqi laugh quietly inside
Alternate take on Nirvanite, this time with bullseyes rather than solid circles as the large segments.
This one is a lot more organic than its predecessor, but also a lot more confusing. Looks like clusters of alien tadpole eggs to me!
This is a clone of NirvaniteI went and mangled Spelunker by Zephram. I am messing with the shapes of the spaces between the letters. The name of the font indicates that most of the letters are wearing bell bottoms.
This is a clone of SpelunkerTHE MOMENT YOU STEP INTO SPOOK MANSION, YOU REALIZE YOU DONE GOOFED UP. THE DOOR SLAMS SHUT BEHIND YOU AS SCARY PIANO MUSIC BEGINS TO WASH OVER YOU AND TERRIFYING KICK DRUM SOUNDS BEGIN TO PUMMEL YOU. WITHIN MOMENTS, YOU ARE DROWNING IN A SEA OF EERIE AMBIENCE. "WOE BETIDE THE FOOL WHO CONSPIRES TO TAKE MY RICHES!", SHOUTS A GHOSTLY VOICE SOMEWHERE BEHIND YOU. YOU TURN, BUT NOTHING'S THERE. BOO! LOL....................................................
10x10 fantasy- and RPG-related icons. The bigger they are, the better they look!
This is finished! I'm happy to hear out and possibly implement others' suggestions, though.
*
A - Knight's Blade
B - Warrior's Shield
C - Paladin's Helmet
D - Samurai's Armour
E - Wizard's Potion
F - Thief's Keys
G - Monk's Rosary
H - Dwarf's Pickaxe
I - Necromancer's Scroll
J - Sorceress' Staff
K - Shaman's Totem (Spider)
L - Ninja's Glove
M - Assassin's Bow
N - Cleric's Holy Symbol
O - Viking's Hammer
P - Bandit's Buckler
Q - Barbarian's Axe
R - Druid's Mandrake
S - Priest's Altar
T - Jester's Crowns
U - Warlock's Book of Shadows
V - Witch's Lantern
W - Dancer's Lei
X - Hypnotist's Charm
Y - Miner's Hat
Z - Explorer's Map
a - Trapper's Caltrops
b - Demolitionist's Arsenal
c - Vampire Hunter's Boomerang
d - Herbalist's Bag
e - Archaeologist's Fossil
f - Goblin's War Trumpet
g - Gourmand's Platter
h - Musician's Harp
i - Gladiator's Net
j - Oracle's Beads
k - Bard's Singing Sword
l - Spelunker's Rope
m - Merchant's Abacus
n - Gambler's Dice
o - Siege Operator's Catapult
p - Aztec's Warclub (Macuahuitl)
q - Drunken Master's Jug
r - Fighter's Headband
s - Judge's Gavel
t - Guru's Meditation Balls
u - Dungeoneer's Folding Ladder
v - Moneychanger's Scales
w - Cultist's Altar
x - Magician's Hat
y - Friar's Cross
z - Fisher's Harpoon
0 - Skeleton
1 - Kobold
2 - Goblin
3 - Bone Dragon
4 - Pumpkin Head
5 - Slime
6 - Vampire
7 - Imp
8 - Dragon
9 - Mimic
. - Chest
, - Pile of Loot
*
See also: Donjon16, Militaricons, Travelicons
I decided to make a design which incorporated the thinnest/lightest weight lines possible in FontStruct. This is the result; I'll add more if people like it.
These 1/32 lines cannot be accurately nudged, so a unique line has to be built for each vertical position where I want a line. These lines also cannot be centered on a place where two curves meet (such as the middle of B or R). This introduces some unintentional asymmetry to the design, but I like it, so I'll keep it.
There is also the problem that forming a diagonal line of the same line weight is nearly impossible. While angled 1/32 lines can be formed, their angles are all close to 0. No method exists for making a line which slants at 45 degrees while also being 1/32 weight. So, I had to make some thicker lines in certain areas. I don't think they detract from the design, but if you scrutinize this enough, you'll notice them.
Some kind of great big ol' chain.
In retrospect, I think it looks like a jewelry chain from a dwarven civilization. Perhaps the hypothetical jeweler cut and ground the stones in an imitation of some dwarven font!
When glyphs are used in isolation, they somewhat resemble carved signets or seals. Increasing the letter spacing allows you to create a variation of the design. (This is something that must be done in-software since the font will render as monospaced by default.)
*
12SEP2018: Added lowercase... the low resolution combined with the design method make it very difficult to render distinctive lowercase versions of every letter, but I'll keep working on it. There's a lot of similarity between pairs like S/5, Z/2, etc., so this font is most effectively used in forms of writing wherein context suffices to inform the reader as to the identity of each glyph (lists, prose, and technical writings). If you want to use this in a password system or something, I recommend using one case's glyphs only.
*
Design Rules:
1. Negative spaces will be areas of 0.5 bricks' effective length or width.
2. Negative spaces may exceed the 0.5 measurement only by increments of 0.5 and in only one dimension at a time.
3. Glyphs will fill their framed canvasses to the greatest extent possible while adhering to the other rules.
When life gives you halflemons, make Halfade!
*
This is what I call a Plain Spurless design. There are no actual spurs, only right-angled corners to suggest spurs. All lowercase letters are like this except r, which is a Rounded Spurless because it needs to curve to avoid looking like Γ, and because it's only 2 bricks wide so there's no other place for it to curve.
I made this to have mostly right angles, to have a condensed look (see filrt), and to be good for speedreading. My own experiments in speedreading favored glyphs with simple curves which don't terminate in small arcs (see CGJSZfgjrsyz@()[]{}). There are exceptions (c2369?$) because these are more recognizeable when they have such arcs. Additionally, glyphs such as BPRXY have slightly rounded counters near the vertical center, which enhanced their readability without causing them to look out of place.
The remainder of design considerations were things which are fairly idiosyncratic and unlikely to be discovered by others. For instance, the descender of Q is 2 bricks, while lowercase letters' descenders are 3 bricks and symbols' descenders are 1 brick. This is the result of a technique that attempts to visually codify different cases & types of glyphs. The slightly different contours thus formed by each word on its underside seem to enhance both readability and aesthetics.
A multiline pattern-fill design that looks like fish scales. It is a very functional multifont, especially at smaller sizes.
The spurs, stems, and line motion add subtle detail to help identify each letter. Additionally, some custom bricks are experimentally combined with the macaroni bricks to preserve the pattern while also forming the curves.
A 2x2 design which started with a "split" aesthetic and ended up with a "stenciled" one. I embraced the change and now all these glyphs are functional as stencils. They contain minimal stacking and no composites.
In some cases the inside is connected to the outside at only one point. If you decide to use this for stencilling, I recommend using a stout material for the stencil and storing it with care.
The name comes from one of the many, many old joke bands which I created.
Recommended: Use with kerning turned on!
Version 2.6
*
Inspired by a comment by jonrgrover.
I built diamonds sized according to the Fibonacci series, then made a segmented display out of them. The design was then carved away to make the glyphs you see here. I used the members 1, 2, 3, 5, and 8. These sizes proved most feasible to work with in this sort of arrangement.
I gave the terminals a flared appearance which I think makes the glyphs look slightly Celtic. The design also makes me think of beach sand and things found on the beach - shells, pretty rocks, and so on.
Experimental 24-segment display or massive monochrome Mondrian matrix. Pixel compatible!
The thinking behind this one was that with incongruously sized segments arranged in the proper way, I would create a design which was effectively 5x5, but which accomodated more glyphs than 5x5 usually does. Negative space is incorporated into the structure of many glyphs, though not enough to classify this as an IVO design.
"Qualtron" is the name of an imaginary entity that a friend believed in - a being meant to represent the result of "a mathematical equation that can rule the universe". I didn't inquire further about it... :D
*
Design Rules:
1. Segments can have interior length/width of 2 or 5.
2. The central 2x2 square must always remain open.
3. Square bricks and 90-degree angles only.
*
Original size: 20.75pt (use multiples of this value for pixel perfection)
The main font used by MARENGI Omnisystems in my video game series, "Endless Sea Of Stars". These letterforms can be found engraved into or projected onto practically every piece of MO technology. This script was designed in 2011 to be suitable for printing, logo design, art, and many other purposes. It lacks the constant height which most of my other pixel fonts have, but makes up for it with its bookish appearance.
Unfortunately, replicating the exact design of the antialiased version of this font is impossible, not only on FontStruct, but on all software other than ESOSVM. This is because ESOSVM uses a custom renderer which makes use of proprietary techniques. Marengi HD comes close, but not very.
------------------------------------------------------------------
Versioning:
2.6 (19Aug2018) - "bdďđ" were perfected. Space width reduced.
2.5 (20Jul2018) - "IÌÍÎÏø" were perfected and massive kerning work began.
2.4 (15Jul2018) - "J" was perfected and several letterwidths were altered.
2.3 (18May2018) - "hnru34679ÀÁÂÃÅÈÉÊÌÍÎÏÑÒÓÔÕØÙÚÛÝÞßàáâãåæçèéêìíîïñòóôõøùúûý" were perfected.
2.2 (17May2018) - ":;gjty%/\ÂÆÊÎÔÛâæêîôû¼½¾" were edited for more consistency and readability.
------------------------------------------------------------------
MIV: 8.74
Original size: 11pt (use multiples of this value for pixel perfection)
------------------------------------------------------------------
Made on a whim as a result of rediscovering an old design (see sample).
It's pixel perfect at 12pt, 24pt, 36pt, etc. :^)
Since the inspiration image had only uppercase in it, I took some style liberties with the lowercase. The result is mildly comical!