INNERCITY — Geometric future retro display grotesque
════════════════════════════════════
Geometric unicase display sans with a stylistic filled counter-like (Uc) set and monolinear 'bare-boned' geometric grotesque (Lc) set.
— Full alphanumeric dual-variant font !!
════════════════════════════════════
Elmoyenique's "zenzura" (a very stylish work in it's own right, make sure to check that one as well) anyway,
His 'zenzura' font kind of struck me with a healthy fresh dose of motivation. In the past I've explored somewhat similar style designs, but none of those ever really got consolidated into the extensive and complete work Elmo delivered with his stunning zenzura.
So I decided to dig up one of my older such projects and see if this new motivational boost could turn 'half'-a-font into a complete piece.
Long story short, this update is the result of that venture.
════════════════════════════════════
Where previously this project came in just one style (filled counters), with no additional glyph alternates. Basically a complete absense of the lowercase-string all together, and only very limited complementary set of symbols and punctuation marks were present. Neither did the previous version had a great deal of refinement in terms of metrics / kerning and overall horizontal distribution of type-set material. So, it was nothing more than a plain doodle of the idea I had back then, that had to be preserved for a later stage.
But being drawn into more recent projects at the time I eventually ren dry on motivation to fully finalize this I ended up publishing it in its rough state.
════════════════════════════════════
ABOUT THE UPDATE:
The'bare-boned' lowercase is a somewhat futuristic geometric looking form, whereas the filled uppercase set has a strong retro vibe.
Combined in 'mixed-case' it can make a cool optional decorative style capitalization for your text. Used in isolation the two styles (Uc, Lc) both could be used as two seporate fonts, allowing stylistic text hierarchy.
In addition to the stylish retro-like, and partially filled forms I included a glyph-alternative set that strips the letterforms down to their monolinear core-geometric essence.
The design of this set is characterized by the spacious, sharp and clear appearance, that looks slightly futuristic but fashionable still.
With this new addition being the more legible and clean form of the two style sets, I placed this variation into the lowercase-string, making this the default-style for the font.
For the numerals, symbols and punctuations, I tried to remain committed to the stylish filled nature of the uppercase set.
A full alternative monolinear and 'bare-boned' numeral counterpart is located in the 'Full Width' Unicode block. Two extra weight variations for the brackets are also included for a more precise personal preference..
— And so it finally could respectably considered being a full font after all.
Thats all folks.. Enjoy !
cheers
This is a cloneMade with the well-known Grafilone typeface (by Bo Berndal) in mind, but more elongated and avoiding its curious roughness. In addition to the basic set of glyphs, some special ones have been added and the Cyrillic alphabet has also been included. The ligatures "ff" and "tt" are located on the characters "ff", "fi" and "fl". Enjoy it, please.
The design of the KVN-Westgate typeface originated from the concrete lettering on the gates surrounding Ben Thanh Market in Ho Chi Minh City, Vietnam. These gates were constructed when the market underwent renovation in the mid-1900s. Having endured for decades, the lettering on the gates represents both the history of the market and the growth of the city, formerly known as Saigon.
Inspiration: https://republi.sh/#westgate
<COMPLETED - NEED SUGGESTIONS & IMPROVEMENTS>
Base height: 8 pixel
X-height: 5 pixel
Descender: 2 pixel
BATAVIER (Pro) — Geometric display sans
═══════════════════════════════════
[ MEMOIR ]
Revision / revival of the geometric lettering seen on a 1916 Dutch litho poster for the Wm H. Müller & Co.'sRotterdam-London passenger service called Batavier-Line(Batavier-Lijn in Dutch) which was originally designed by Bart van der Leck(1876 - 1958).
The Batavier Line existed from 1830-1960, and was the oldest steam shipping line in The Netherlands.
[ UPDATE INTEL ]
A couple of small changes were implemented compared to v/d Leck's original lettering. Most significant is the upscaled Ampersand, but numerous other small cosmetic or optimizing modifications were made as well.
I completed the full alphabet plus numerals and included additional symbols and punctuation marks to make it a fully functional typeface. The lettering is all caps (majescule) only. Some lowercase letter locations harbour a glyph alternate uppercase form as could be seen in the original litho poster source. Another bunch of alternate uppercase forms and underlined “superior” small capital letters were located in the “Halfwidth And Fullwidth Forms” Unicode block. In addition to that it has accented Latin letters for multilingual support. Also two resized alternate forms for the Ampersand and two stylish ligatures have been included.
[ SUMMARY ]
This is actually the second revision I did for the litho lettering by v/d Leck. The first attempt was made using a (faux-) Bézier approach, resulting in a huge grid canvas (168 grid units / bricks tall monstrosity). This made it a lot of hard work to build and for some letters impossible to properly implement kerning since FS values only allows min. -10 / max. 10 of grid units for kerning.
As part of the endeavor to refurbish some of my older FontStructions STF BATAVIER was one of those that was in serious need of some overhauling as well. The problem it presented was the font's cap-height. It was actually so tall and impractical to work and / or modify, that the first revival attempt never really fully materialized beyond a basic character set.
A full glyph only fitted on screen with the FS-editor zoomed-out max. and my browser zoomed-out at 30%. At this scale not only the canvas grid lines in FS's editor all but dissapeared, but it also resulted in a down-sized brick (or 1 square grid unit) with on-screen rendering at only 3×3 pixels, as oposed to 64×64 pixels with the FS-editor's default zoom settings.
So imagine selecting a tiny 3×3 px speck when working the glyph canvas at brick level to modify glyphs... pretty much impossible. Now, the other situation wasn't a whole lot better. This had the browser's zoom restored back to 100%, making the glyph canvas at brick level “workable” again. But in respect to the cap-height this only renders a very small section of the glyph on-screen. Requiring a huge deal of additional canvas navigation in FS's canvas editor, better known as “Pan the view (H)”, which is done with the hand tool.
And well, as many of you will know, this is an absolute bummer When navigating (or panning) a glyph bottom to top requires 3 full canvas swipes.
So yeah, the only way for an extended version ever to materialize was to be rebuild it from the ground up at a much small scale, using very different measurement ratios compatible with FontStruct's kerning.
[ TECH INTEL ]
This second revision attempt successfully reduced the font's cap-height down to a comfortable 5 bricks (or grid units) tall and Em-square of 7 bricks total. Some optical compensations were implemented to certain elements such as stroke weight corrections and careful minute differences in vertical positioning of letter mid-section elements.
For now thats all Folks..
Cheers
Made for FontStruct's Future Competition. This display typeface was designed with a little influence from stencil, this font has rounded corners intermixed with angular corners, and gaps in unusual places. It also uses the “two-storey” lowercase g, which was a challenge to fit cohesively within the restrictions I gave myself.
ASCII + Cyrillic.
Alternate take on Nirvanite, this time with bullseyes rather than solid circles as the large segments.
This one is a lot more organic than its predecessor, but also a lot more confusing. Looks like clusters of alien tadpole eggs to me!
This is a clone of NirvaniteAZUL is BLUE in Spanish. I choose the word blue because it always reminds me of ultra bold fonts. But i feel like just "BLUE" looks dumb so i choose "AZUL" instead. Btw blue in Chinese is "lan". Just imagine "LAN" as it's name lol.
Least important stuff :
I got this idea when i was thinking about if I design a poster for a JoJo character. it'd be Kira Yoshikage. And I was like "Gotta need a ULTRA bold font to show he's really danger" Now you know this totally unuseful thing :P
A little more important stuff :
This font is free for all use.
DO NOT PRESS THE B SYMBOL WHEN YOU USE THIS FONT. SERIOUSLY, DO NOT
lqi laugh quietly inside
LUCERNA — Neoclassical stencil serif
════════════════════════════════════
Lucerna is a modern neoclassical stencil serif in the Didot style.
Simple & Elegant...
════════════════════════════════════
Created primarily with the focus towards luxury fashion and marketing brand-oriented projects, aiming at luxurious and sophisticated design projects.
Although it’s a true and fully functional stencil, design focus wasn’t so much
concentrated around the 'functionality' part of the stencil concept. Instead it was more focussed on the stylish implementation of the concept and on making sure it looks pretty.
The stencil concept was achieved by way of stroke omissions. Some of which are large and drastic, leaving only critical parts of the stroke intact, while others are more subtle, like those detached crossbars or cuts seen in the hairlines.
Thin transitional bracketed serifs and a mixture of various sized teardrop- and pointy terminals, combined with the high stroke contrast, these make up for a sharp and interesting looking font that provokes this thoughtful stencil letter concept.
There is a lot of subtle dynamic height deviations going on, hoping to tune in to more of a lively rhythm, and introduce some playful characteristic properties.
Minute changes to optimize optical performance have also been implemented, such as overshoots. The relative low cap-height makes up for a somewhat short and stocky uppercase quality. Its accompanied by a relatively tall x-height that results in a fairly large lowercase size. Due to the lower cap-height of the font, the short ascenders parts of the lowercase letters still exceed above the Cap-Line, preserving some of that otherwise lost white space, improving legibility.
The design's missing segments and various random detached bits 'n pieces aren't as functional in smaller sizes. Making it harder to read or distinguish detached letter elements from puntuation marks. So it is best used for display purpose.
════════════════════════════════════
A small number of glyph alternative forms are included as well:
• 2 forms of lowercase letter a:Single-storey and double-storey (default).
• 2 forms of upper- and lowercase letters Ss:Pointy terminals (default) and teardrop terminals.
• 2 forms of upper- and lowercase letter Tt: Uppercase letter T has two variations of pointy terminals, normal angled and extra angular. Lowercase letter t has alternative form with teardrop shaped terminal to use at the end of words, and can add a slightly more stylish look. The default version has better proportional width with just a small non-decorative curved terminal, this default form has smaller width for a improved horizontal text advance.
• 4 forms for lowercase letter g:Just 3 additional extra slightly alternate forms.
• 5 forms for lowercase letter f:Bracketed (default), curved, teardrop narrow, teardrop extra narrow, teardrop wide.
• Extra set of Copyright symbols:Cap-height size and x-height size.
• 5 forms of Pilcrow symbols:Just 4 additional extra alternate forms.
════════════════════════════════════
It covers most basic Latin languages, 65 in total so far.
Several symbols and punctuation marks are included. (probably more later)
I hope you like it so far,
Cheers
This is a cloneSchlanke Schöne is a tall condensed geometric sans serif typeface.
=======================================================
The idea behind this font was to experiment with making interresting letterforms, with fewest possible resources. In other words, fewest possible default core bricks, no filters and mostly without expert mode. The only expert mode function I did use was "stack" bricks to make a small number of resized compositions and composite sloped angles. The total amount of different bricks used in the font is 20.
The font design is a simple, fairly straight forward looking sans, but due to this the end result also is pretty legible and clean. I was able to get most of the features done within the design parameters, such include optical correction, diacritics, stylistic alternates and swash capitals.
Very simple, but playful fun...
The stylistic alternates and swash capitals have been stored in the "Halfwidth and Fullwifth Forms" unicode block.
Hope you like it,
cheers
Aenvidere (the normal weight version) still needs fine-tuning and kerning. That will come, eventually :) At the moment I'm quite busy doing too many things concurrently.
Check the font description for AlexGar-Aenvidere for details.
At a later date I'll publish a squared-off version of this. Aenvidere SQ will have the same glyph style but will be wider than the other versions which might make it less useful as a "tool" to attract attention when added as splash insert in text that uses another Aenvidere version.
Moscow, Paris, Berlin in the 1920s... Konstruktivizm, Art Deco, Bauhaus... Effervescent people! This font is for Sergei, the smiling boy in the picture, and for all the people who together built the world. See also zandrine and ztefan.