This is another clone of Monkey (my monospace lanky font); it should be very similar to the original except for the lower x-height and the added accented characters (More Latin/Latin-1, Latin Extended A, Latin Extended B, and now Even More Latin/Latin Extended Additional). It is 16 blocks tall and 6 blocks wide; all letters without diacritics are at most 9 above the baseline and at most 3 below, but the accents push the height of a letter up by 3 blocks (or rarely 4), and the box drawing characters extend even higher, to 16 blocks from descender to the highest point. This font uses the FontStruct 2x2 filter method with plenty of composite and stacked bricks, which lets the curves look good at large sizes while remaining sharp on the screen at normal sizes. Mandrill will look strange in the FontStruct preview if you zoom in or out, but if you download it, it will look sharp at size 16 or 12 (depending on the program).

A font i have been working on for a while, but with some characters removed, because it seemed like it was not going to be finished in a while. I just wanted to publish this first

An angular font with built-in ligatures for <f> and <j>. More punctuation and international support (hopefully) coming soon.

Version 1.3: Added Polish.

*

Another asymmetrical sans-serif made for use in rulebooks for the Freeform Limitless Adventure Kit (FLAK) pen-and-paper game system. This one is classed as a hybrid and works well at all point sizes!

It began as a Constant Height design, but now I don't classify it as such since most of the letters with diacritics are taller than those without. A few letters (eszett, thorn, eta, etc.) are allowed to descend slightly, as well.

This font has also found some use on signage at a friend's bistro!

Experimental 24-segment display or massive monochrome Mondrian matrix. Pixel compatible!

The thinking behind this one was that with incongruously sized segments arranged in the proper way, I would create a design which was effectively 5x5, but which accomodated more glyphs than 5x5 usually does. Negative space is incorporated into the structure of many glyphs, though not enough to classify this as an IVO design.

"Qualtron" is the name of an imaginary entity that a friend believed in - a being meant to represent the result of "a mathematical equation that can rule the universe". I didn't inquire further about it... :D

*

Design Rules:

1. Segments can have interior length/width of 2 or 5.

2. The central 2x2 square must always remain open.

3. Square bricks and 90-degree angles only.

*

Original size: 20.75pt (use multiples of this value for pixel perfection)

Version 1.5: Added Greek and made many refinements. Also came up with a new tilde design for all the glyphs that have one.

*

By request, a casual art deco design.

Alternate take on Nirvanite, this time with bullseyes rather than solid circles as the large segments.

This one is a lot more organic than its predecessor, but also a lot more confusing. Looks like clusters of alien tadpole eggs to me!

AZUL is BLUE in Spanish. I choose the word blue because it always reminds me of ultra bold fonts. But i feel like just "BLUE" looks dumb so i choose "AZUL" instead. Btw blue in Chinese is "lan". Just imagine "LAN" as it's name lol.

Least important stuff :

I got this idea when i was thinking about if I design a poster for a JoJo character. it'd be Kira Yoshikage. And I was like "Gotta need a ULTRA bold font to show he's really danger" Now you know this totally unuseful thing :P

A little more important stuff : 

This font is free for all use.

DO NOT PRESS THE B SYMBOL WHEN YOU USE THIS FONT. SERIOUSLY, DO NOT

lqi laugh quietly inside 

A variant of Marrada with more angles.

Usually with designs I try to make every part look like it "belongs" with the others as opposed to trying to make each part look its best. With Marrada, I struck a balance between the two. Q1@*&{} are probably the best examples of this sort of balance...

A slightly leafy engraving-style Decolike.

Is it Serif or Sans? Western or Gothic? Double font or not? One thing is certain: This is not a time-travelling alien. Probably.

Version 1.3: Added Polish.

* $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ 

Another simple experiment with composites, this time trying to make a font which can easily accomplish a "diamond encrusted" or "disco floor" style effect within my graphics software.

SPOILER: I succeeded. :D

* $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ 

I decided to make a design which incorporated the thinnest/lightest weight lines possible in FontStruct. This is the result; I'll add more if people like it.

These 1/32 lines cannot be accurately nudged, so a unique line has to be built for each vertical position where I want a line. These lines also cannot be centered on a place where two curves meet (such as the middle of B or R). This introduces some unintentional asymmetry to the design, but I like it, so I'll keep it.

There is also the problem that forming a diagonal line of the same line weight is nearly impossible. While angled 1/32 lines can be formed, their angles are all close to 0. No method exists for making a line which slants at 45 degrees while also being 1/32 weight. So, I had to make some thicker lines in certain areas. I don't think they detract from the design, but if you scrutinize this enough, you'll notice them.

Version 1.3: Added Polish.

*

This font used to be a normal Decolike... until someone decided to chow down on it! They seemed to prefer the taste of spurs, as all of them have been bitten off, leaving only semicircular impressions.

"Nervousa" is an anagram for "Ravenous".

A multi-line design which is slightly reminescent of mazes/fingerprints. It's not designed to create functional mazes, but it is somewhat capable!

"Absinthelyric Print" is an anagram for "Labyrinthine Script".

*

Original size: 11.25pt. Use multiples of this value for pixel perfection. (If you use antialiasing, it will look perfect at most any size.)

*

Design rules:

1. Square bricks and 90-degree angles only.

2. Alphabetic glyphs must have open terminals; numerals and symbols must have closed terminals. Letters which do not terminate (D,O, etc.) must be broken so that they terminate.

3. Glyphs must fill the 15x15 grid.

4. Ligatures and combinatorial glyphs must fit into one letter's space.

5. Draw from the outside in.

Revisiting Celosia, this time with faux-beziers instead of pixels.

Alternate @ design on ©.

Version 1.1 - Added Polish.

*

A font for times when Immersive Mode is turned off. This is used for documents and signage within the Euphedoran Extradimensional Research Institute situated in Euphedora, Greater Azwelkeland, Planet Ashr within ESOSVM.

EERI is known for Fengmiao Fukota, Salva Dheen and Triste Marinan, three of ESOSVM's most-learned and chronologically oldest AI characters. The lattermost of these is often consulted (through a software called MIDAS) for analysis which I use to improve the readability of certain fonts.

THE MOMENT YOU STEP INTO SPOOK MANSION, YOU REALIZE YOU DONE GOOFED UP. THE DOOR SLAMS SHUT BEHIND YOU AS SCARY PIANO MUSIC BEGINS TO WASH OVER YOU AND TERRIFYING KICK DRUM SOUNDS BEGIN TO PUMMEL YOU. WITHIN MOMENTS, YOU ARE DROWNING IN A SEA OF EERIE AMBIENCE. "WOE BETIDE THE FOOL WHO CONSPIRES TO TAKE MY RICHES!", SHOUTS A GHOSTLY VOICE SOMEWHERE BEHIND YOU. YOU TURN, BUT NOTHING'S THERE. BOO! LOL....................................................

A pixel font which combines four experimental techniques at once:

1. Structurally disconnecting the stems from the open parts of letters.

2. Allowing glyphs to extend beyond the reaches of width and starting position.

3. Designing glyphs specifically to connect and form new shapes, rather than simply allowing shapes to emerge from existing characteristics.

4. Designing glyphs so that the overall font is free of a need for kerning.

*

Alternates are now on UPPER CASE. I'll continue to update this as I get more ideas!

*

Original size: 6.75pt (use multiples of this value for pixel perfection)

Going for an industrial sci-fi look. The hard angles give these letters the appearance of being made by some kind of tape or roller.

This font was originally designed to be uppercase only. So, the lowercase might be considered as an alternate set.

Original size: 24pt (24pt, 48pt, etc. look most crisp when not using antialiasing)

By request, a condensed and quirky outline font!

*

Original size: 7.5pt (use multiples of this size for pixel perfection)

A 117-segment display made to have a more "mosaic" look. Try using this one at odd sizes, especially with antialiasing off! The resulting distortions occur in a consistent way which leads to many new uses for the font.

Original size: 38pt

Font with a "light rays"/stained-glass effect.

A more bookish take on Comicool, made for more comfortable general reading. It's still useful for comics, as well!

Many letters were squared off in the corners, lowercase letters were given stems, and an assortment of glyphs were edited for more style.

This is the third iteration of Comicool... rather than develop them all toward one style, I tried to make each iteration the best it could be. The result is three distinct, but still compatible styles. This one is probably the best for body text!

A minimalistic yet powerful gothic font that is designed for efficient hand-writing.