Searching for more “Display” fonts?
Buy and download “Display” fonts at MyFonts.
Grulla's letters –built on a 2x3 square grid– have (tri)angular counters & square terminals. Counterspace=letterspace, letter /f/ is kerned onto "rounded" letters (fc,fd,fe,fo,fs). Diacritics support spanish (hello from Argentina!)
REWINDER - A bold and decorative "I don't have a clue" style font.
Alternative lowercase versions for (a, c, e, g, j, m, n, o, q, s, u, v, w, y, z)
=============================================
Usually I design fonts from a general concept I have in mind and start with the Latin alphabet first since I am most familiar with these characters. Then when I have completed these I start adding extra language support. letting everything evolve from there on out into the other languages such as Cyrillic or Greek. Doing it in this fashion I find myself having the best change of doing a decent job designing characters I am not familiar with the right way and in line with the design parameters.
This time I starten designing the Cyrillic alphabet first, trying not to think about the Latin set design at all. I did this in an attempt to have a neutral mindset that wasn't influenced in doing it a certain way.
And I must admit, this was the best and most comfi time I ever did a Cyrillic set. I experienced a sense of having a lot more freedom for creative output.
The result became this cool looking "hell knows" what kind of style letterforms. I have no clue if I actually did a decent and accurate job at the Cyrillic set, and I'm not sure where to go from here on out either.
I hope you like it so far
Cheers
INNERCITY — Geometric future retro display grotesque
════════════════════════════════════
Geometric unicase display sans with a stylistic filled counter-like (Uc) set and monolinear 'bare-boned' geometric grotesque (Lc) set.
— Full alphanumeric dual-variant font !!
════════════════════════════════════
Elmoyenique's "zenzura" (a very stylish work in it's own right, make sure to check that one as well) anyway,
His 'zenzura' font kind of struck me with a healthy fresh dose of motivation. In the past I've explored somewhat similar style designs, but none of those ever really got consolidated into the extensive and complete work Elmo delivered with his stunning zenzura.
So I decided to dig up one of my older such projects and see if this new motivational boost could turn 'half'-a-font into a complete piece.
Long story short, this update is the result of that venture.
════════════════════════════════════
Where previously this project came in just one style (filled counters), with no additional glyph alternates. Basically a complete absense of the lowercase-string all together, and only very limited complementary set of symbols and punctuation marks were present. Neither did the previous version had a great deal of refinement in terms of metrics / kerning and overall horizontal distribution of type-set material. So, it was nothing more than a plain doodle of the idea I had back then, that had to be preserved for a later stage.
But being drawn into more recent projects at the time I eventually ren dry on motivation to fully finalize this I ended up publishing it in its rough state.
════════════════════════════════════
ABOUT THE UPDATE:
The'bare-boned' lowercase is a somewhat futuristic geometric looking form, whereas the filled uppercase set has a strong retro vibe.
Combined in 'mixed-case' it can make a cool optional decorative style capitalization for your text. Used in isolation the two styles (Uc, Lc) both could be used as two seporate fonts, allowing stylistic text hierarchy.
In addition to the stylish retro-like, and partially filled forms I included a glyph-alternative set that strips the letterforms down to their monolinear core-geometric essence.
The design of this set is characterized by the spacious, sharp and clear appearance, that looks slightly futuristic but fashionable still.
With this new addition being the more legible and clean form of the two style sets, I placed this variation into the lowercase-string, making this the default-style for the font.
For the numerals, symbols and punctuations, I tried to remain committed to the stylish filled nature of the uppercase set.
A full alternative monolinear and 'bare-boned' numeral counterpart is located in the 'Full Width' Unicode block. Two extra weight variations for the brackets are also included for a more precise personal preference..
— And so it finally could respectably considered being a full font after all.
Thats all folks.. Enjoy !
cheers
This is a cloneRINKEL — Bold constructivist display design
════════════════════════════════════
This was very much influenced by the rare sighting of
1974's Lettergraphics International typeface by the name 'Belden'
Belden was shown in a Lettergraphics ad in U&lc vol. 1, no. 3 from 1974, without further design credits. It was also featured in the book cover design for "Metaphysics: An Introduction" by Keith Campbell.
—Which in terms I have used for my personal extrapolation of the complete character set of this FontStruction.
────────────────────────────────────
Not a digitizing revival of the original piece, but rather a very strongly inspired personal take on it.
—More complete character set is coming soon..
Let me know what u fellow structivists think of it so far!
Cheers
ALIEN WORMHOLE (BOLD) - Monolinear Sci-Fi-inspired 'worm' typeface.
═════════════════════════════════════
This is a 'Bold' style version to the "ALIEN WORMHOLE" type family.
This version has a ton of extra character compared to the 'Light' version.
For now only the two 'Basic Latin' sets, some symbols and a small number of puctuation marks match. And it remains to be seen if I can translate back to the Light version all those extra's that were put into this Bold version.
I mentioned 'type family' earlier, but in reality there isn't a whole lot of family just yet. Since the two for now hardly correlate truly.
═════════════════════════════════════
Here is a link to the 'Light' version
═════════════════════════════════════
Stay tuned for future updates.
Cheers
BLAUHAUS - Bold Bauhaus inspired geometric typeface.
I know there is tons of out there already, but I had to do one myself...
It's far from perfect, but it was made on a very tiny grid space, so a whole lot of space to occupy with bricks wasn't a luxury this one! (I'll demonstrate a example below)
Still I think it looks pretty rad so far!
This is a cloneEPOCH - Modern light-weight geometric display sans
───── 「 MEASURES 」
(in grid units)
X-Height: 1
Cap-Height: 2
Descent: 1
Optical Corrections: None
Stroke: 1/8 th
4-Em / 0.125 : 1-Stroke (0.125 ≍ 1/8 th)
― No filters used.
───── 「 SUMMARY 」
This is yet another deep dive into the very small and tiny quantum realm of FontStruct's small grid and light-weight stokes.
Unlike some of my previous endeavours into this dark corner of the FS-editor, which could have dizzying complexity in forms, this project for once didn't stress the sh....*t out of me by stretching the limits for my capabilities beyond what is still comfortable this time. Nor did it drain every last frigging bit of my knowledge or clever creative insight to pull it off.
On the contrary,
For once it remained largely a pretty straight forward and easy project in terms of forms and geometry. The absence for most of the 'bar-raising' features such as diagonal forms, rounded, transitions or stroke modulation made this 'FontStruction' that much more easy.
And when metaphorically breaking it down to the bare naked form and necessities, this design mainly consist of FS's (default)-brick set, resized modifications of those, combined with a set of stacked composites.
There a still a number of things I'd rather seen differently, and will see later attempts at making improvement, but taken in a broad perspective most of the included material so far look pretty fine to me already. And to point out one of the things that is still bugging actually are the 'accented' letters.
Some glyphs have odd values for their 'character'-width, and this makes it impossible to achieve 'grid to em-square'-bounding box allignement in FS's editor. So accents in these asymmetrical values look slightly ofset.
― "Changing character widths to nearest even value is simply far too destructive to the stylish characteristics of the fonts appearance"
───── 「 ABOUT THE FONT 」
In the end it became a pretty cool looking light-weight geometric modernist sans-serif style that at the same time has strong hints of Art-Deco-style lettering as well.
And apart from the minor things it fell short with, I think there is a lot about its overall character-set design and forms that is looking pretty darn rad actually if you ask me.
Content-wise the font is a single case design in a 'all-caps' or Majuscule style. The (Lc)-string was kept empty for deliberately for the technical reason of preserving all the (default)-blank metrics data for any further design updates.
───── 「 WHATS INSIDE 」
A little bit of everything...
■ Body text formatting:
□ Basic-Latin based character set with accented letters & numerals
□ Most punctuation marks
□ Numerous symbols
■ Decorative formatting
□ Pictorial attributes
□ Repeating patterns
───── 「 THE END 」
Let me know what you think so far,
Cheers
FORMALISMS - Modernist inline display type
Rigid square-based inlined modernist display style with incised (fake-) 3D effect, mimicing a quirky and non-logical take on twisted geometric form and sometimes folded appearance.
Some characters, but mainly symbols still need slight improvements, some are still missing as well.
The bi-linear stroke was incised at certain specific positions and had one or more (cross-)intersecting line segment included that connect the two colinear strokes. This is creating 2 additional extra geometric hyper-planes, and allows the option of including the illusion of looking at three-dimensional geometric objects.
But the way this is implemented into the design in fact obeys no relationship to any actual fundamental propeties and isn't necessarily a correct three-dimensional form, nor fully or faithfuly folded.
The glyphs also have somewhat of a monogram logo style quality
Hope you like it
Cheers
KROEPOEK -Letterforms influenced by the orient.
=============================================
Simple geometry based design that tries to imitate Asian style letterforms.
=============================================
The font comes as a "all-caps"(majuscules) with the lowercase string used to include a set of glyph alternatives for the uppercase set, but cutting the descending parts of the glyphs.
As a little bonus, a set of underlined lowecase vowel alternatives (a, e, i, o, u and y) was also included to allow a small level of personal depth. These can be found in the Unicode block for: 'Halfwidth and Fullwidth Forms'
Besides the letters there is also a set of essential punctuation and symbols present to make the font proper functional.
=============================================
I hope you like it,
Cheers!
STF_FRONTAL BOSSING - A groovy bold and rounded Sans Serif typeface.
═══════════════════════════════════
This is going to be my second entry in the "HeavyComp"
═══════════════════════════════════
ABOUT THIS FONTSTRUCTION:
TECHNICAL:
Grid: 17 × 16 square grid units (incl. descends, overshoots, accents)
Filter: 2 × 2 brick size
BIO:
The idea was to come up with a friendly chubby fella.
And for all I know I think I have done just that. In the end, it does seem to appear it came out with a slightly bigger forehead than the average (but, no love was lost here, we have come to learn to appreciate the misfits).
Despite its weight and slightly clumsy appearance this juicy Mr. Boogie still got dat funk, and can not wait for it to be the next saturday night.
Even so, when he for once isn't told to "Swing and Boogie" he still is nice to have hanging around. His friendly persona is only to be matched by the ever so nice soft curves. "No sharp edges to detect here".
I can only hope for that all of you come to appreciate him as well! ;-)
(Let's do this in another language as well)
CONCEPT:
The idea was to make a letterform that has a friendly looking design. I tried to achieve this by way of softening all hard convex corners with a smooth rounded curve. And by "all" I litteraly meant, even on all diagonals, accents, thin strokes and stroke tips (Nothing was left untouched).
For all the concave corners, so the negative space (white space) of the letters have multiple solutions depending on what is happening (does it curve, intersect and or wether a stroke continues or not)
The curves all have near hi-res looking (a couple of minute imperfections) but otherwise smooth surfaces, and there are multiple custom created ratios/transitions, such as:
1.5×1.5, 2.5×2.5, 2.5×3, 3×4 (+ The bullet is a 7×7 circular dot)
I hope you like it,
Cheers
(PS: Sample follows soon)
Такой агрессивный футуристический стиль стал считаться геймерским. И теперь представьте, что он ещё и светится!
Such an aggressive futuristic style has become considered gaming style. And now imagine that it also glows!
Perhaps this is the limit of my capabilities.
See more:
https://fontstruct.com/fontstructions/show/155561/fs_penmanship
https://fontstruct.com/fontstructions/show/1501135/lazzaro-1
https://fontstruct.com/fontstructions/show/1598518/cryostasis-vempire
https://fontstruct.com/fontstructions/show/1747945/stepforward-1
https://fontstruct.com/fontstructions/show/1735833/logic-16
https://fontstruct.com/fontstructions/show/408191/telamon
https://fontstruct.com/fontstructions/show/477501/largo
https://www.fontstruct.com/fontstructions/show/1334057/bb-corners
DECO-TESK - Bold Art-Deco display style
=================================
No filters
Grid: 4 × 5 (small grid !)
Glyphs: 3 ×4.5 (+1 ascends & descends for punctuations)
=================================
My 3rd font for the "HeavyComp"
It's a all-caps Art-Deco display font.
STF_LIQUID DISCO (Solid) - Sollid filled style variation on:
=====================================
The "Heavy Competition" was the perfect excuse to finaly blow some new life in this older project.
=====================================
This font family is a funky looking display sans. The original outline version was inspired by music advertisement and psychedelic arts.
This follows up on the first version with a rock solid filled glyph.
I hope you like it, cheers!
This is a clone of STF_LIQUID DISCO (Outline)VEROORDEELD - A geometric slab serif
This is a small type family with two style variations, see links bellow!
• Display Bold contrasted display version ◄- U are here!
• Text Light weight monostroke version
Accidental Fontstruct remake of Senator by Emigre. Initially reconstructing the lettering seen on this book cover, later found out about it being an existing comericial font. I decided to completed it anyway. But for this reason it will not be available for downloading. Sorry...
elza: serif meets ball terminal... I found out the Germans actually have a word for this: 'Tropfenserife', which roughly translates as 'teardrop-serif'. Normally appearing at the end of strokes in letters such as a,c,f,g,j and r, I have tried to build this font around it, using it as its main design feature.
inspired by the letterforms of apoc revelations italic and nikita
This is a clone of fs ecnadwolsTYPE-O-NEG4TIVE ― Avant-Garde reverse-contrast inspired sans
═════════════════════════
Experimental endeavor into avant-garde, reversed-contrast inspired letterforms.
I will explain the font in more detail bellow in the comment section.
Cheers
====[ EDUCATIVE INTRO ]====
At a time when making books was a very time-consuming and labor-intensive process, an increasingly literate 12th-century Europe required more and more books. To keep up with the increasing demand for the spread of literature was a ongoing struggle. Writing materials such as inks, dyes and parchment were very expensive. And it wasn't until the 15th century, when parchment was largely replaced by paper, along with the arrival of the printing press, for it to gradually became cheaper, faster and less labor-intensive.
So it made perfect sense to find other ways to help with this process.
Simplifying a script and cutting back on the decorative calligraphy was the most effective way of doing this.
This led to the development of simplified variations to pre-existing bookhand scripts. One of such forms is littera textualis, categorizing within the Textualis/Textura or simply Gothic bookhand scripts group.
Littera textualis is the simplest and least calligraphic form of textualis. It was developed with just two main goals in mind, to save time and costs. The simplified letterforms could be written much quicker than the more calligraphic and luxurious variations. It offered a more cost effective and faster version to the script. It was often used for less important literary works and academic papers.
It functioned as the standard bookhand script in the Netherlands during the 14th & 15th centuries.
====[ ABOUT THIS FONT ]====
TEXTUALIS BATAVICUM - A calligraphic inspired Blackletter/Gothic bookhand script. Essentially a Textualis/Textura inspired work.
The design mainly follows the concept for a traditional form of littera textualis bookhand script as was described in the intro written above.
It remains a work in progress and I will add update info for this font in the comment section bellow.
Some character still need slight adjustments, but so far I am very pleased with the result. As you can probably notice, the uppercase characters have slight more weight than the lowercase has.
More characters follow soon.
I hope y'all like it
Isometric 3D outline style typeface.
The glyph have a exact copy slighly elevated and to the right of its original which I then connected with eachother to create the box-like three-dimensional idea.
Because of some serious design difficulties it remains far from complete, but I am kind of done with it for now due to this. For now only support for uppercase, no numerals and very limited punctuations. I think I fully kerned it, or at least everything that is important. On last thing I need to mention, the smallest open spaces doesn't allow this font to work in very small size. These will look filled at smaller point size.
I'm not sure if I will ever try another attempt to finish it at a later stage. (who will tell..) ;)
But I think what I've got so far is too cool for not publishing it. So for now it would do just fine as a logotype or for a decorative usage but not much else.
Enjoy!
This is a cloneMoto Verse is a bold, thick lettered and futuristic display font. It works incredibly well on logos, branding or pretty much anything that requires a modern vibe.
This is a clone of Auto Techno