Some characters are missing because it couldn't fit the width of the font.

Took me 3 days to make this.

Don't confuse ij with ÿ.

More glyphs of letters in Private Use.

m0425_Geohaus is a bauhaus-inspired sans serif typeface.

Inspired by Interfacer. See also Zagato and Zagato Bold.

Looks like the Bauhaus style is trending on FS.

VON NEUHAUS — Geometric “Bauhaus”-inspired style
═══════════════════════════════════
This is the latest evolution of a “Bauhaus”-inspired constructivist style typeface design that originally started 5 years, or two font versions back.
To me personally this is a long awaited triumph, that has finally materialized after years worth of been haunted by this idea, and the crazy speculations about this ghost that would never be...
Well, that was untill now...  So at last, I can now finally proudly present to you this latest of arrivals to come from this unforeseen series of typeface progressions.
This newborn addition is in fact the 3rd phase of this letter concept's evolution, and caused the font project to undergo a series of addaptations that graduatelly increasing the levels of sophistication possible by chaging it's internal structure and behaviour within the FontStruct-editor. This 3rd addaptation unlocks the FontStruct editor's “Expert Mode” full power potential.
Enabling all editor functionallity to provide the most versatile font creation capabilities available within FontStruct.

STF_BLAUHAUS was the font's very first version, created back in early 2019. It's the font's original concept as it innitially was first intended. It essentially started out as a personal study into the design of letters on a small grid. And more importantly, the creation of required composite bricks to do so.
The idea back then was to craft the most complex geometry possible without the use of any “Expert Mode” functionality whatsoever. Now, what this innitially did was still quite novel to me at that time, as this had led to the development of a FontStruction that was solely built from the extensive use of composite bricks. Not just a couple, but a staggering 272 composite bricks in total. Many of which in fact are quite intuitive and required certain amounts of careful thinkering with the maths found in it's geomtry to craft these custom brick compositions.

So as explained above, there was no use of any of FontStruct's “Expert Mode” functions. This meant that the option to nudge, flip or rotate any of the bricks wasn't available. Now this changes everything in respect to building complex fonts, since in order to get all the bits and pieces of a letter such as: crossbars, intersections, curves and corners properly aligned requires, a precisly fitting composite brick to be tailor-made. In terms of the FontStruct limitations, this cause the physical properties of FontStruct's brick composition tool to be fundamental as to how much complexity and refinement can be put into it's letter geometry. In other words this is fundamental as to how well crafted the design is going to look in the end, since there is no option to further manicure shape or form other than from within those bounds of the adjacent 16-brick-array grid squares of a selection for composition.

I've choosen to design the alphabet concept in this “Bauhaus”-inspired geometric style, simply because of the simplicity this style has in terms of its basic pure geometric forms. The final result became this simple and bold looking small grif display type with a “3-bricks” Em-size only.

but it had some crucial compromises that had to be made due to FontStruct's design limitations. Not terrible, but not quite perfect either.
One very important byproduct from this limitations as were described above was a huge collection of very intuitive custom brick compositions that offer seemless alignement and perfect fits, basically an extensive set of custom bricks that work in a very similar fashion as FontStruct's default “Connect” bricks.

Bringing us to the main reason for 2022's version of this font.
STF_BLAUHAUS (Plus) was the font's second version, and most recent state that it sat in for the last year, up till this now. In this 2022 version of the of this font design modification the FontStruct editor's “Expert Mode” functionality was introduced into the design. Hoping to further manicure some of these compromised critical area's in an attempt to see what refinements could be implemented to revise the 2019's original version.

Now that the option to nudge, flip or rotate bricks was available, new more complex geometric shapes suddenly became possible. This sparked an explosion of new characters and additional alternative forms. Although now the FontStruct editor got vastly more versatile and potent, it remained strongly limited by that still present 1:1 brick size filter setting. Nevertheless, this made possible a very substantial update of the older font, and allowed many new shaping capabilities.

STF_VON NEUHAUS is the 3rd and final evolition to have come from my earlier FontStruct endeavours; STF_BLAUHAUS and STF_BLAUHAUS (Plus)
This version  basically saw the transition from a font only using 1:1 brick size filter into a font at 2:2 brick size filter settings to unlock all power potential of the FontStruct editor's “Expert Mode” functions.

I could now write another eqyually as long body of text, explaining what's new in this final version or which other improvements were made, or say about it whatever the hell I want, but I figure that the picture becomes even more apparent when simply comparing the 3 fonts from old to new, and see the evolution happening before your eyes.

Start with STF_BLAUHAUS, folowed by STF_BLAUHAUS (Plus), and witness the full glory of "next-level" FontStructing that made possible the last version STF_VON NEUHAUS.

I hope you like it,

Cheers

An experiment based on: "What if an 8 color wheel was a letter O?" A work in progress just to bring up the potential of the new update. These colors are just rainbow colors and were not inspired from LGBT flag.

Berlin, Moscow, Paris in the 1920s... Bauhaus, Konstruktivizm, Art Deco... Effervescent people! This font is for Stefan, the cameraman in the picture, and for all the people who together built the world. Alternative M and N in the { and } glyphs. See also zergei and zandrine.

Work in progress …

Planning only to track down some bugs in the FontStructor, I was suddenly struck by similarities between the random shapes I was placing on the canvas and images I had stumbled upon recently on the web – I think it was in this article in the Guardian.

The images were of Peter Womersley’s modernist design for “High Sunderland”, fashion designer Bernat Klein’s erstwhile home, near Selkirk in Scotland. I wasn’t at first drawn to the modernism, but to the promised description of the experience of living in a house which was visually so open to the outside world – although ultimately the article wasn’t especially enlightening on that point. Later I found more extensive sources of images of the building on the web.

Working on this was the first time in quite a few years that I have been possessed by my own, earnest FontStructing rush. I was very pleased to find that the FontStructor tool still works as well and simply as it ever did – allowing for a uniquely swift and unimpeded creative progress through a set of modular glyphs.

The basic grid for each letter, based on the characteristic modules of the building, is topped by a slightly heavier bar and so slightly asymmetrical in the vertical, like the structure of High Sunderland itself, but it is essentially square and consists of six parallel horizontal bars.

In the FontStruction, the emphasis is on these crossbars – with every effort made to avoid partial horizontals and additional vertical lines, especially for the basic latin alphabet. The font is essentially unicase, with some variants in the lower case.

At one point I noticed that there are some window panels in High Sutherland which do have a single, thinner vertical divider (for sliding open presumably) so I used this for the middle legs of the M and W. After completing the initial FontStruction I also noticed in photographs of the building that there is at least one window with multiple vertical subdividers, so maybe that can form the basis for a new grid and a new FontStruction (High Sutherland B).

Things started to get fun for me when I got into the punctuation and accented letters. I saw no alternative to adding additional verticals for the hash, the percentage sign and some other glyphs.

I really like the percentage sign, although I’m not sure how legible it is – but I guess ultimately that it is an issue with the whole font.

When it came to glyphs with unavoidable diagonals – such as the slash glyphs – I went for a stepped approach, which I think is basically a good one, maintaining the emphasis on horizontal lines, and suggestive of musical notation – but the steps are a bit sloppy. I probably need to revisit them.

I’m not sure about applications for this FontStruction. Maybe it would be useful to someone intending to erect their own mid-modernist dwelling in the hills, or to someone planning to put up some new shelves!

BLAUHAUS - Bold Bauhaus inspired geometric typeface.

I know there is tons of out there already, but I had to do one myself...

It's far from perfect, but it was made on a very tiny grid space, so a whole lot of space to occupy with bricks wasn't a luxury this one!  (I'll demonstrate a example below)

Still I think it looks pretty rad so far!

Quite different from Archaus, but can be considered as from the same series.

Spacing got much better ;)

Additional lines give this a certain retro-deco feel.

Thanks!

Italic stencil experiment.