Gr4ftY presents:
Bolden
Just a simple bold font.

feel free to give critique, as long as you have something helpful to say.

i would especially appriciate help with the greek.

thanks:

to @Kiên Trung for helping with the Υ

to @elmoyenique for helping with the y

to @Sed4tives for a bunch of bits and bobs here and there (c, t, and n, to name a few)

additional info:

X height: 5

Cap height: 8

letter width: 5

Filters: 2x2

Based on the logo of the movie Prototype (1992).

VON NEUHAUS — Geometric “Bauhaus”-inspired style
═══════════════════════════════════
This is the latest evolution of a “Bauhaus”-inspired constructivist style typeface design that originally started 5 years, or two font versions back.
To me personally this is a long awaited triumph, that has finally materialized after years worth of been haunted by this idea, and the crazy speculations about this ghost that would never be...
Well, that was untill now...  So at last, I can now finally proudly present to you this latest of arrivals to come from this unforeseen series of typeface progressions.
This newborn addition is in fact the 3rd phase of this letter concept's evolution, and caused the font project to undergo a series of addaptations that graduatelly increasing the levels of sophistication possible by chaging it's internal structure and behaviour within the FontStruct-editor. This 3rd addaptation unlocks the FontStruct editor's “Expert Mode” full power potential.
Enabling all editor functionallity to provide the most versatile font creation capabilities available within FontStruct.

STF_BLAUHAUS was the font's very first version, created back in early 2019. It's the font's original concept as it innitially was first intended. It essentially started out as a personal study into the design of letters on a small grid. And more importantly, the creation of required composite bricks to do so.
The idea back then was to craft the most complex geometry possible without the use of any “Expert Mode” functionality whatsoever. Now, what this innitially did was still quite novel to me at that time, as this had led to the development of a FontStruction that was solely built from the extensive use of composite bricks. Not just a couple, but a staggering 272 composite bricks in total. Many of which in fact are quite intuitive and required certain amounts of careful thinkering with the maths found in it's geomtry to craft these custom brick compositions.

So as explained above, there was no use of any of FontStruct's “Expert Mode” functions. This meant that the option to nudge, flip or rotate any of the bricks wasn't available. Now this changes everything in respect to building complex fonts, since in order to get all the bits and pieces of a letter such as: crossbars, intersections, curves and corners properly aligned requires, a precisly fitting composite brick to be tailor-made. In terms of the FontStruct limitations, this cause the physical properties of FontStruct's brick composition tool to be fundamental as to how much complexity and refinement can be put into it's letter geometry. In other words this is fundamental as to how well crafted the design is going to look in the end, since there is no option to further manicure shape or form other than from within those bounds of the adjacent 16-brick-array grid squares of a selection for composition.

I've choosen to design the alphabet concept in this “Bauhaus”-inspired geometric style, simply because of the simplicity this style has in terms of its basic pure geometric forms. The final result became this simple and bold looking small grif display type with a “3-bricks” Em-size only.

but it had some crucial compromises that had to be made due to FontStruct's design limitations. Not terrible, but not quite perfect either.
One very important byproduct from this limitations as were described above was a huge collection of very intuitive custom brick compositions that offer seemless alignement and perfect fits, basically an extensive set of custom bricks that work in a very similar fashion as FontStruct's default “Connect” bricks.

Bringing us to the main reason for 2022's version of this font.
STF_BLAUHAUS (Plus) was the font's second version, and most recent state that it sat in for the last year, up till this now. In this 2022 version of the of this font design modification the FontStruct editor's “Expert Mode” functionality was introduced into the design. Hoping to further manicure some of these compromised critical area's in an attempt to see what refinements could be implemented to revise the 2019's original version.

Now that the option to nudge, flip or rotate bricks was available, new more complex geometric shapes suddenly became possible. This sparked an explosion of new characters and additional alternative forms. Although now the FontStruct editor got vastly more versatile and potent, it remained strongly limited by that still present 1:1 brick size filter setting. Nevertheless, this made possible a very substantial update of the older font, and allowed many new shaping capabilities.

STF_VON NEUHAUS is the 3rd and final evolition to have come from my earlier FontStruct endeavours; STF_BLAUHAUS and STF_BLAUHAUS (Plus)
This version  basically saw the transition from a font only using 1:1 brick size filter into a font at 2:2 brick size filter settings to unlock all power potential of the FontStruct editor's “Expert Mode” functions.

I could now write another eqyually as long body of text, explaining what's new in this final version or which other improvements were made, or say about it whatever the hell I want, but I figure that the picture becomes even more apparent when simply comparing the 3 fonts from old to new, and see the evolution happening before your eyes.

Start with STF_BLAUHAUS, folowed by STF_BLAUHAUS (Plus), and witness the full glory of "next-level" FontStructing that made possible the last version STF_VON NEUHAUS.

I hope you like it,

Cheers

TYPOGRAAF — Geometric modernist display typeface

═══════════════════════════════════

Typograaf is simple looking modernist style aimed for display use. It doesn't work well in a long line if text nor at smaller sizes. But perfect for large display work, logo's and such. The letterforms have several little nuances and multiple custom crafted curved parts with smooth (near) real Bézier contour quality.

So far only general concept plus some extra's was created, no multilingual suport for now.

Let me know what you think

Cheers

GROOVERIDER — 70's future retro display sans
═══════════════════════════════════
Grooverider is another groovy looking display style with that distinctive 70's retro aesthetics.

The concept for the lettering is that of a solid future retro / space-age style with inversed-stress.  It's reversed weight contrast adds some additional groovin' funkyness and good old boogie wonder flavour to the font's overall characteristics. Making it somewhat of a hybrid mixture between two distinct 70's and 80's retro styles.

Simple at the surface, but rather complex down at the Editor level, since the letterforms have several tailor-made geometry and curve shapes. Pulling off some glyphs without disrupting the (near) real Bézier curve geometry was tricky I must say. Like for example the joined letters such as lowercase Æ/Œ, question mark, @ sign, number 2 digit, percent sign and lowecase letter S all proved difficult. But also some unlikely ones that are typically pretty straight forward now were trickier within the font's parameters. But I'm pretty satisfied with the end result so far. Little to no compromising imperfections slipped into the design,  one or two real minor ones are present, but only truly become noticeable once the size is fully blown up.

It was very fun to make though, I hope y'all like it...

Cheers

An extra "X" at the "x" glyph, thanks to @Dmitriy Sychiov.

Unicase font with a lot of alternates in the lowercase to improve the general playfullness. Also added more diacritics and accents, and remodeled and kerned the old glyphs. (Plus: other "1" at the "t", the 3rd "U" -and their accents- are at the "v", "ò", "ó", "ô" and "ö", respectively.)

VAN NELLE (Blueprint) — Geometric modernist sans
═══════════════════════════════════

☛ THE SOURCE
A re-interpretation of the 1926 geometric sans serif alphabet system reproduction by Jacob Jongert, published in a 1930 sourcebook by N.J. van de Vecht. The geometric uppercase set of the alphabet system is what would later become the famous sans serif capitals which he used for lettering throughout many of his Van Nelle materials.

☛ THE FONTSTRUCTION
Attempt at making a convincing recap of the original alphabet by Jacob Jongert as it was shown in the 1930s sourcebook, and extrapolate that into a full functional font. The decision to go with a small grid sparked a number of limitations in terms of the design freedom that forced some inevitable changes. But the general idea sort of became not to make it a revival, but rather more or less a faithful revision. One that would still be instantly recognizable yet didn't necessarily had to be all about accuracy.

☛ —The small grid design made sure this wasn't happening anyway!

But, for instance, the most striking difference between the two fonts (their weight) in fact is such a byproduct for one of those limitations. Something FS's small grid couldn't properly reproduce, so VAN NELLE (Blueprint) has a slight stronger weight, making the font somewhat of a bold style version of the original. This in addition provided me with slight extra freedom to inplement a little personal touch for further manicure of the font's finer details. Which allowed me to cope with some of the optical clunkiness that come with a fatter face and the grid based design.

Besides these circumstantial differences, which were basically beyond my control, I've also made some intentional changes to make the typeface more practical to use. The changes include things like the significantly lowered ascender height, the slight different width for certain letters, larger tittle (dot above i, j & ij), and several more. despite these changes I believe it very much still reflects what Jongerts once invisioned for the system.

☛ SOME NOTES ON THE ORIGINAL AND ITS CREATOR
Jacob Jongert(1883-1942) was a advertising designer from the Netherlands. After varied studies, including being Roland Holst’s assistant and an acquaintance and colleague of S. H. de Roos [who brought the Arts & Crafts ideas of William Morris to the Netherlands and devoted his career to book design and typography] with whom Jongert experimented with several printing techniques and discovered graphic design as his ideal art form.
¶ In 1923 Jongert rolled in a unique and long-term collaboration with the Van Nelle company, where he became head designer, a position he held until 1940. The Van Nelle company had an extremely modern approach towards advertising (they even commissioned Cassandre to do a poster) and Jongert created for the firm a recognizable image with clear shapes, powerful letters and primary colours, totally Dutch avant-garde in style, and with a strict and rigorous approach directly linked to De Stijl principles. The corporate identity he created has become a milestone in the design world.
¶ The lettering, however, is the driving force that ties it all together. The style is a straightforward set of plain, mono-linear, sans serif capitals in a style that just started to come into fashion in the late 1920s, early 1930s with the rise of functionalism and geometric type design. Yet, while these ideas were already thrown out there, its clever simplicity plus the systematic and cohesive way Jongert implemented his lettering was unusual at the time. The square and minimal construction of the forms allowed the letters to contract and expand to fit any situation, yet maintain a consistent and recognizable appearance throughout the Van Nelle line. ¶ Something we only recently have learned to appreciate is to see his hand crafted system amid the current advancements in variable-font technology, which offers a similar kind of flexibility to typeface designs. A quality that certainly placed him well ahead of its time.

What I particulary like about Jongert's original is the stuff that is going on in the lowercase set of the alphabet, which are those quirky lowercase letter inventions that are different from the more traditional modernist sans, but sadly the lowercase letters were pretty much never used in his works.

I created a simple PDF typeface specimen for those who want to see the high-resolution preview.

PDF SPECIMEN WAS DELETED

​​Thats all Folks ☚

☛ Cheers

THE MILLENNIUM NEVER ENDS WITH THIS FONT!

Yep! That's right, Y2K is not that bad with this font! It's a celebration of the era that started a whole new generation of early internet goop!

This whole font are free to use, cause it's my first font to use for this site. Feel free to modify, share or fix it. But CREDIT THE AUTHOR, PLEASE! Thank You!

ARS NOUVEAUX - Art Nouveau inspired display typeface
═══════════════════════════════════
A personal digital reimagination of the lettering style by "Charles Rennie Mackintosh" (1868-1928), a pioneer of the "Glasgow School of Art" and so called "Arts & Crafts" movement.
His distinctive style of lettering has been seen many revisions, revivals, reimaginations and inspired designs alike over the years, and has evolved into a broad collection of available fonts.
This basic stylistic lettering concept from Mackintosh sort-of losely funcioned as the structural guiding principle for the creation of "Ars-Nouveaux".  
This FontStruction is an experimentation into creating similar flavored, but still unique letterforms within that same design framework.
 
First I started to layout the overall basic asymmetrical core geometry from a set of custom rectangles, half arc's and slants for each of the letters bare skeleton shape. Once I completed the full set of 36 glyphs [a/z, 0/9] These basic shaped were then further modified into more sophisticated finalized letterforms.

Caps-only, but with many alternates, accompanied by a set of ornate initials.

Hope you like it,

Cheers

Fauxhaus — Geometric minimalist modernism sans-serif design
═══════════════════════════════════
[INSPIRATION]
As the name already suggests, this indeed was inspired by the Bauhaus-typograpy towards functionality style.

More specifically by Austrian artistic polymath Herbert Bayer's 1925 experimental "Universal" alphabet.
The alphabet he designed became somewhat synonymous with the school's identity, and probably is the most well known Bauhaus typeface, and truly epitomizing that typical simplified "Form follows function" Bauhaus-minimalism style. It was also used for the new Bauhaus-building signage.

Some key features in Bayer's original form are those easily recognizable geometric sans-serif letterings, with letter composition based on strong basic geometry, having eliminated all decorative elements of the letterform composition for that crisp industrial, slight mechanical minimalist aesthetic. Bayer's original Universal alphabet also eliminated the need for a upper case letter, further simplifying it towards more of a functionality-driven standardization. Bayer developed multiple revisions and variations of the alphabet. Sadly Universal was never cast as a font, as during that era they weren't manufactured into printing typefaces, and the designs would only exist as drafts (as was the case with all Bauhaus-typefaces). Nonetheless it served as a lettering model for Bauhaus students, colleagues, and followers alike, and they were regularly re-used for signs, book covers and publications by many of its members, but even beyond institution walls the typographic style began to gain a foothold. Throughout the years we have seen a multitude of revivals and other Bauhaus-inspired typeface designs. Some of which that try to be faithful digitizations of the original, whereas others taking a more artistic approach to the style by providing their own personalized reinterpretation of the Bauhaus-aesthetic. So even to this day, many decades later, it repeatedly continues to inspire and influence designers time and again.

Bayer, First a student and later junior master of the printing workshop, was one of Bauhaus’s most influential attendees, advocating the integration of all arts throughout his career. Though not trained as a typographer, he was also assigned with the task of creating a universal visual & typographic identity for the school.—a task Bayer took very serious.Sparking perhaps the most mythic typeface to ever come out of the Bauhaus, which is "Universal"—one that at that time strove to be as idealistic as the school itself
═══════════════════════════════════

[THE "FAUXHAUS" FONT]
This is an artistic reinterpretation of Bayer's "Universal" alphabet.

Aiming to preserve the unmistakable style and simplistic geometric stylistic properties of the original, while in the same time allowing a more 'free-form'-approach towards crafting the letterform compositions. This of-course as long as they remains in-line with the stylistic properties of the original. And for the lack of having a better explanation;

—To do sort-of a 'faithfully different' artist depiction of Bayer's original Universal alphabet.

Some notable differences made in Fauxhaus compared to Universal are the re-introduction of a upper case form and the slight de-simplification and inclusion of subtle decorative nuance.

In some cases I've choosen to compose certain specific characters to be more or less identical as to how Bayer originally intended them, whereas others may be entirely different looking. And for some characters have one or more alternative form as well. Some of which are more 'ad hoc'- compositions drawn as we went when new ideas popped up. But others were specifically created to preserve and / -or include certain distinctive and unmistakably identifiable letterforms from Bayer's original Universal alphabet.

Greek & Cyrillic characters included in Fauxhaus were solely added for my personal experimentation purpose only, and they serve 'zero' function as to additional language support of the font.

"Use at your very own risk"— as these could very easily be gone the very next update.

Each letterform was meticulously composed from a random collection of the various memories, which after some thirty Bauhaus-inspired and / -or -revival works including their respective 'shared' research I have accumulated over time for Bauhaus typography like Bayer's work.
No source reference image was used as guidance for creating this FontStruction, everything came straight from the knowledge I gathered from the many previous Bauhaus related projects I did.
So to draw solely from memory alone somewhat a convincing and reasonably similar personal reinterpretation of an original 'Bauhaus' typeface at this stage has gotten pretty easy for me.

For this project in particular I've choosen to construct the letterforms on a medium sized grid, using the linear interpolation 'faux'-Bézier method. So beware that when using this font at very large point size rendering the remnants of this process will become visible!

That's all for now, I hope you like it so far,

Cheers

When I first saw jonrgrover's Wiggly Wumpus, I told the author my first impressions about the font. After a few days, I finally decided to do it myself, and that's how these glyphs you see were born (thanks for the creative impulse, Jon). Achieving a smooth, sinuous curve has been a bit more laborious than expected, and there are some letters of complicated construction and I'm not 100% happy with the current look of some of those. But here they are, dancing infront of your eyes as if reflected in a fairground mirror. Btw, "Specula risus" (latin) means "Mirror of laughter", that kind of mirrors that visual and comically deforms our bodies... Hope you like them.

Opening day of Ant-Man and the Wasp::Quantumania! So of course, this particular color font needs to emerge in this space and time. Spinning of the concept of quantum tunneling and Hank Pym's Quantum Tunnel van, this font spans multiple realms simultaneously. Shift dimensions at your own risk.

STF GROOTESK Pro ― Contemporary geometric grotesque
═════════════════════════
A clean and geometric grotesque sans-serif typeface that is equipped with tons of extended professional editorial typographic features,

such as:
Multilingual support in 3 script writing systems for 113 languages, glyph alternative forms, stylistic ligatures, accents and punctuation marks, symbols, technical, ordinal, pictographs, additional dingbats.
15164 stored kerning-pair and many other professional features!
━━━━━━━━━━━━━━━━━━━━━━

[ TECHNICAL ]
■  Metrics(in square grid units)

5.0-Em / 0.5-Stroke
2.0 : 2.0-Brick Size Filter

Em-Square:           5.0
Cap-Height:          3.25
X-Height:              2.0
Ascent:                  0.875
Descent:                1.0
Overshoots:    2 × 0.0625   Top/Bottom  - (uppercase only)
━━━━━━━━━━━━━━━━━━━━━━

■  [ ADDITIONAL EXTRA IMPORTANT RELEASE NOTES ]

Previously published as a (non-Pro)-version with the same name.

But when that version eventually corrupted, it rendered it useless.

And after several repair attempts the innitial isolated "FS-editor" native
brick corruption eventually was fixed! But from this point onward all theFontStruct-generated-*.TTF-files downloaded from this particular FontStruction delivered a broken TrueType-font file, that upon its installation process resulted in having a error. Leaving me, or anyone for that matter who had downloaded it, unable to get it or its updates installed.

So after unsuccesfull struggling for a while I noticed that the cloned version didn't generate a broken *.TTF-file. So I decided to terminated the original FontStruction and delete it.

━━━━━━━━━━━━━━━━━━━━━━

■  [ DESIGN INFORMATION ]

The main inspiration came from those early to mid-20th century geometric grotesques, and visual environment of that era.
Although the characters were mostly geometrically constructed, and remain as close as possible to basic geometry, "STF GROOTESK Pro" includes a blend of stylish hints of hand-crafted lettering influences and intentional irregularities in order to tribute those classical geometric designs.

For extra additional emphasis the design tries to take advantage of a rather unusual vertical Uc>Lc proportion, with ascender parts of the 'Lc' characters sitting well bellow the cap-height, making the 'Uc' appear strikingly taller in comparison. Essentially providing  the uppercase with a more "Condensed" feel. Some of the other characteristics of the design are it's sturdy and stylish yet clean presence, with little to no contrast, and it comes in bold style only. But to compensate for the lack of extra weight versions there was some serious time invested into additional testing and optimizing the entire typeface. So it is super well mastered and therefor extremely versatile.

That being said..

Looks can be deceptive at quick first glance, and this indeed might appear as being a very basic looking design. Even though this in fact is far from being just that other basic looking display sans, nor your next boring geometric grotesque!

From a FontStructor-perspective point-of-view I recommend to take a more ‘close-up’ view of the design's finer details. This creates a better understanding and greater appreciation for the extreme level of complexity that is present in both form and function.
Zooming-in on some of the letters would reveal the font's subtle, yet nuanced diversity of that 'previously' hidden underlying personal characteristics that usually remain invisible in text format at smaller point size. Now suddenly just its overall care for finer detail and overall quality within every bit of the design, the tons of custom shaping, stroke transitions and additional smoothing will gradually emerge as zoom levels get ever deeper. At its deepest level it will even shed some light on the surgical stuff that mostly works invisibly and without the awareness of its reader.

A display typeface at it's core, still it performs equally great in very small body-print text or web design application, as it does too in larger format for headings, ads or branding.
Thus providing, this very function efficient and reliable work-horse,

a truly genuine "one style fits all" typeface powerhouse.

And there its no question whether this could hand out "a 'one-punch' K.O." of a Headliner, thats obvious. But this unyielding bumpy behemoth just as well takes u for the long run, effortlessly telling you fascinating stories.

Especially well cared for optimized rendering on a computer display device, and deliver simple yet versatile seemless digital typeset material.

━━━━━━━━━━━━━━━━━━━━━━

■  [ SPECIAL NOTE ]
A big thanks and 50% of the design credits for the lowercase 's' go out to elmoyenique
━━━━━━━━━━━━━━━━━━━━━━

■  [ "Pro" VERSION EXTRA'S ]
The new "Pro" version update for GROOTESK utilizes several TrueType smart-font features and control characters to map two or more glyphs for combining glyph composition.

Coloured version of zulu. You can use the second different version of each glyph to avoid repetition in some words. These colours are inspired by a 2010 poster from the Apeloig's studio.

No Patrick, mayonnaise is not an instrument.

A cap-font

Unicase font with alternates. Special characters: Blank space at the "\", "LT" pair (kerned) at the "fi" ligature and the "TJ" pair is at the "fl" too. Better to see the font at big size. Enjoy and Happy New Year 2023!

 A jazzy, unicase, unique typeface!

i am posting this late at night, becuase i know due to time zones, it's morning right now. So, here i am at 1:14am, trying to post this late at night, so people wide awake somewhere else see this! 

Years ago, a small font from 2008 caught my eye. Now I've dared to use its structure to modify and complete it, and thus create a new visual experiment. I'm sorry, diacritics are the weak point. Hope you like it. ¡Y Feliz Navidad a todos, amigos!

Republished with some accents, diacritics, etc. Likely still in progress (as if anything is ever really finished.)  Cheers,

Frutiger Aero brings back memories

 I've mixed an eighties' font with a military stencil font and got this! It is suprisingly legible at small sizes!

Thanks to riccard0 for helping me fix the "s" and "z" and swapping the "u" and "v"!

My take on a thin sans.

It should cover all Western European languages (plus Hawaiian and Hepburn romanisation).

First pass at light kerning done, will be refined with use.

@Sychoff if you stumble upon this, could you please complete it for me, since i am too lazy to complete it myself