DOBINI BALWAUM (Inline) — Didone-style 18th century modern serif
═══════════════════════════════════
Dobini Balwaum is a Didone, or modern, serif typefaces inspired by the works of Bodoni, Didot and Walbaum.
This font had been in the making for quite a long time as I ren into several design difficulties along the way. Most challenging parameter was the inline width. By default the width for the inline was set at 0.125 (or 1/8th) grid units.
Maintaining a constant width for the inline proved to be next to impossible. Therefor it evolves around a 'close' approximation of 0.125 units instead. Stroke weight for the letterform contours also proved to be somewhat of a constraining factor for the overall design concept. As it limits the ability to build complex geometry.
Due to the complexity in brick arrangements the font remains having some minor imperfections that I wasn't able to polish out so fat yet, and some may never will..
For now only Basic Latin letters, it remains a WIP
I hope you like it so far,
Cheers
SPOKOYNOY NOCHI — 1920's Art-Deco style
═══════════════════════════════════
This is a simple monolinear Art-Deco unicase font. Upper & Lower case glyphs are the same sets. But in addition to the unicase (default style) there is a full alphabet of glyph alternate forms located in the Half Width And Full Width Forms Unicode block.
I done global kerning, but extra pairs are still required..
I hope you like it,
Cheers
STF GROOTESK Pro ― Contemporary geometric grotesque
═════════════════════════
A clean and geometric grotesque sans-serif typeface that is equipped with tons of extended professional editorial typographic features,
such as:
Multilingual support in 3 script writing systems for 113 languages, glyph alternative forms, stylistic ligatures, accents and punctuation marks, symbols, technical, ordinal, pictographs, additional dingbats.
15164 stored kerning-pair and many other professional features!
━━━━━━━━━━━━━━━━━━━━━━
[ TECHNICAL ]
■ Metrics(in square grid units)
5.0-Em / 0.5-Stroke
2.0 : 2.0-Brick Size Filter
Em-Square: 5.0
Cap-Height: 3.25
X-Height: 2.0
Ascent: 0.875
Descent: 1.0
Overshoots: 2 × 0.0625 Top/Bottom - (uppercase only)
━━━━━━━━━━━━━━━━━━━━━━
■ [ ADDITIONAL EXTRA IMPORTANT RELEASE NOTES ]
Previously published as a (non-Pro)-version with the same name.
But when that version eventually corrupted, it rendered it useless.
And after several repair attempts the innitial isolated "FS-editor" native
brick corruption eventually was fixed! But from this point onward all theFontStruct-generated-*.TTF-files downloaded from this particular FontStruction delivered a broken TrueType-font file, that upon its installation process resulted in having a error. Leaving me, or anyone for that matter who had downloaded it, unable to get it or its updates installed.
So after unsuccesfull struggling for a while I noticed that the cloned version didn't generate a broken *.TTF-file. So I decided to terminated the original FontStruction and delete it.
━━━━━━━━━━━━━━━━━━━━━━
■ [ DESIGN INFORMATION ]
The main inspiration came from those early to mid-20th century geometric grotesques, and visual environment of that era.
Although the characters were mostly geometrically constructed, and remain as close as possible to basic geometry, "STF GROOTESK Pro" includes a blend of stylish hints of hand-crafted lettering influences and intentional irregularities in order to tribute those classical geometric designs.
For extra additional emphasis the design tries to take advantage of a rather unusual vertical Uc>Lc proportion, with ascender parts of the 'Lc' characters sitting well bellow the cap-height, making the 'Uc' appear strikingly taller in comparison. Essentially providing the uppercase with a more "Condensed" feel. Some of the other characteristics of the design are it's sturdy and stylish yet clean presence, with little to no contrast, and it comes in bold style only. But to compensate for the lack of extra weight versions there was some serious time invested into additional testing and optimizing the entire typeface. So it is super well mastered and therefor extremely versatile.
That being said..
Looks can be deceptive at quick first glance, and this indeed might appear as being a very basic looking design. Even though this in fact is far from being just that other basic looking display sans, nor your next boring geometric grotesque!
From a FontStructor-perspective point-of-view I recommend to take a more ‘close-up’ view of the design's finer details. This creates a better understanding and greater appreciation for the extreme level of complexity that is present in both form and function.
Zooming-in on some of the letters would reveal the font's subtle, yet nuanced diversity of that 'previously' hidden underlying personal characteristics that usually remain invisible in text format at smaller point size. Now suddenly just its overall care for finer detail and overall quality within every bit of the design, the tons of custom shaping, stroke transitions and additional smoothing will gradually emerge as zoom levels get ever deeper. At its deepest level it will even shed some light on the surgical stuff that mostly works invisibly and without the awareness of its reader.
A display typeface at it's core, still it performs equally great in very small body-print text or web design application, as it does too in larger format for headings, ads or branding.
Thus providing, this very function efficient and reliable work-horse,
a truly genuine "one style fits all" typeface powerhouse.
And there its no question whether this could hand out "a 'one-punch' K.O." of a Headliner, thats obvious. But this unyielding bumpy behemoth just as well takes u for the long run, effortlessly telling you fascinating stories.
Especially well cared for optimized rendering on a computer display device, and deliver simple yet versatile seemless digital typeset material.
━━━━━━━━━━━━━━━━━━━━━━
■ [ SPECIAL NOTE ]
A big thanks and 50% of the design credits for the lowercase 's' go out to elmoyenique
━━━━━━━━━━━━━━━━━━━━━━
■ [ "Pro" VERSION EXTRA'S ]
The new "Pro" version update for GROOTESK utilizes several TrueType smart-font features and control characters to map two or more glyphs for combining glyph composition.
SANS SERIFSCO — Humanist / Neo-Grotesque Sans-Serif
A contemporary neo-grotesque sans-serif design with regular weight.
I tried to add subtle diverse and nuanced visual elegance while still remaining minimalistic. Most significant feature is the subtle stroke modulations, distinguishing this from a more geometric style.
Designed to be versatile and suitable for a wide range of different purposes and optimized for legibility in small point size body copy.
The font was constructed on a large grid using linear interpolation (also known as faux-Bézier method). This allowed the most freedom for constructing more complex custom forms, curvatures and all the various stroke modulations.
The font has a total vertical height of 88 square grid units, this is including all optical compensations, ascends / descends and accents.
ALIEN WORMHOLE (BOLD) - Monolinear Sci-Fi-inspired 'worm' typeface.
═════════════════════════════════════
This is a 'Bold' style version to the "ALIEN WORMHOLE" type family.
This version has a ton of extra character compared to the 'Light' version.
For now only the two 'Basic Latin' sets, some symbols and a small number of puctuation marks match. And it remains to be seen if I can translate back to the Light version all those extra's that were put into this Bold version.
I mentioned 'type family' earlier, but in reality there isn't a whole lot of family just yet. Since the two for now hardly correlate truly.
═════════════════════════════════════
Here is a link to the 'Light' version
═════════════════════════════════════
Stay tuned for future updates.
Cheers
REWINDER - A bold and decorative "I don't have a clue" style font.
Alternative lowercase versions for (a, c, e, g, j, m, n, o, q, s, u, v, w, y, z)
=============================================
Usually I design fonts from a general concept I have in mind and start with the Latin alphabet first since I am most familiar with these characters. Then when I have completed these I start adding extra language support. letting everything evolve from there on out into the other languages such as Cyrillic or Greek. Doing it in this fashion I find myself having the best change of doing a decent job designing characters I am not familiar with the right way and in line with the design parameters.
This time I starten designing the Cyrillic alphabet first, trying not to think about the Latin set design at all. I did this in an attempt to have a neutral mindset that wasn't influenced in doing it a certain way.
And I must admit, this was the best and most comfi time I ever did a Cyrillic set. I experienced a sense of having a lot more freedom for creative output.
The result became this cool looking "hell knows" what kind of style letterforms. I have no clue if I actually did a decent and accurate job at the Cyrillic set, and I'm not sure where to go from here on out either.
I hope you like it so far
Cheers
STF_FRONTAL BOSSING - A groovy bold and rounded Sans Serif typeface.
═══════════════════════════════════
This is going to be my second entry in the "HeavyComp"
═══════════════════════════════════
ABOUT THIS FONTSTRUCTION:
TECHNICAL:
Grid: 17 × 16 square grid units (incl. descends, overshoots, accents)
Filter: 2 × 2 brick size
BIO:
The idea was to come up with a friendly chubby fella.
And for all I know I think I have done just that. In the end, it does seem to appear it came out with a slightly bigger forehead than the average (but, no love was lost here, we have come to learn to appreciate the misfits).
Despite its weight and slightly clumsy appearance this juicy Mr. Boogie still got dat funk, and can not wait for it to be the next saturday night.
Even so, when he for once isn't told to "Swing and Boogie" he still is nice to have hanging around. His friendly persona is only to be matched by the ever so nice soft curves. "No sharp edges to detect here".
I can only hope for that all of you come to appreciate him as well! ;-)
(Let's do this in another language as well)
CONCEPT:
The idea was to make a letterform that has a friendly looking design. I tried to achieve this by way of softening all hard convex corners with a smooth rounded curve. And by "all" I litteraly meant, even on all diagonals, accents, thin strokes and stroke tips (Nothing was left untouched).
For all the concave corners, so the negative space (white space) of the letters have multiple solutions depending on what is happening (does it curve, intersect and or wether a stroke continues or not)
The curves all have near hi-res looking (a couple of minute imperfections) but otherwise smooth surfaces, and there are multiple custom created ratios/transitions, such as:
1.5×1.5, 2.5×2.5, 2.5×3, 3×4 (+ The bullet is a 7×7 circular dot)
I hope you like it,
Cheers
(PS: Sample follows soon)
ELEVATED (PRINT) - A 3D outline display typeface design with shadow effect.
It's inspired by the lettering from a sketch by great Dutch graphical designer "Jurriaan Schrofer".
===========================================================
This is the long overdue shadow style variant which was requested by Goatmeal and elmoyenique. It has diagonal shading lines included (as was also presented in the original sketch by Jurriaan Schrofer)
This rework has one major difference compared to all previous versions, once more it was constructed with a different size to grid ratio, one that corrects the size distribution, enabling the recreation of the original sketch with high accuracy.
The stroke weight in this "PRINT" version more accuratly mimics the original sketch and therefor is not optimized for digital display use.
===========================================================
The shadow effect is the default style for this font, this also includes all numerals, punctuation marks and other symbols that make up the full font, these occupy the uppercase. The outline style A-Z glyphs occupy the lowercase.
Enjoy!
This is a cloneHappy Hollydays! Inspired by elmoyenique's colours
Inspired by the shapes of G1 Decoreus. Vertical serifs only (not sure if that makes sense, but seems to work)
[Click Pixel in the font viewer, then click Shift+Pixel four times to view the font correctly]
I love it when fonts come together like this one.
It started as me thinking what can I do for the 'twenties' that isn't 1920s. (thalamic has done those before!). The idea that I was toying with was doing each letter on a grid of 20 parts (blocks, stripes, etc.). There is already a stripes font in development (which is unlikely to be shared any time soon). I thought maybe I could convert it to a 20 stripe version. But it's too optical illusion-y and requires blocks of free time at a stretch for me to visualize the letters, which I don't have. Then the idea came to just develop a new block that says 20 on it and use it as a pixel for some pixel font. Which led to thinking an XX is 20 in Roman numerals. So I thought develop a grid that reads XX in multiple ways and directions.
With that basic idea, I started tinkering with the fontstructor and soon realized that I will need a lot of bricks. That necessitated making custom X and O bricks. That gave rise to the basic grid block of 7x7 grid that can be used as something that can be "carved" to form various letters. Better in theory than practice. M is OK, but a 7 brick wide A is just too wide. Plus the larger Xs were too white. Had to create more custom bricks to take away some of the whiteness that left the X still visible. These additional custom bricks were cumbersome to make...mainly because of my limited ability to visualize which brick placed where in a 4x4 grid will create what shape but also because I was using quarter brick corner triangles which meant that each brick of the 4x4 grid was internally a 2x2 grid as well. So a 8x8 grid really with 64 internal smaller bricks. Some bricks required making a custom brick and then merging it with another custom brick several times over to have the correct custom brick. Of course, I didn't know if the pain-stakingly created custom brick will be appropriate or not.
Much experimentation later, finally figured out what to do with this idea. Once all the custom bricks were created and the basic look of the font developed, then it was just a matter of placing the bricks in the right place. Often times not even that as one letter was just a modified version of another letter...like D and 3 are just a modified B; L and F are modified E, etc.
This was supposed to be a joke entry that didn't take much time to make. It's still a joke entry not to be taken seriously...but it did take time...and provided puzzle-like geometric challenge to overcome. Very fun.
How could I not love fontstruct!?