24-segment display. This one belongs to a small family called Calculatrix.
Like Calculatrix 12, this one is spaced so that every segment appears in its proper place, as if the text were being rendered on one giant display. (If using this in your own software, you will want to check the line spacing as it can vary depending on the software.)
I suppose this font could be used for weaving or embroidery work, as well... it has that look about it...
TIP: Try zooming out while already at Pixel size!
Just a stencil doodle. Seems like it would go well with the Kitchen Sink family.
This is built at roughly 3.5x5, but shrunk with filters to look squareish and to make the line spacing very small.
*
See also:Guillotine Blade
Pixel demake of Arizone Unicase. Same glyphs as the original.
Version 1.1
*
An alternate take of Diamond Eyes with circles replacing the 2 smallest diamonds. No brickswapping used - many diamonds shared bricks so I had to place the circles by hand. This permutation introduces more texture, solidity, and complexity to the original. Hope ya like it!
This is a clone of Diamond EyesTrying this style out. The name comes from a monster in the game NetHack.
*
See also:Gridlarva
With the increased boldness, this design loses its decolike look in favor of a slightly more sci-fi one.
A lot of broken glyphs had to be fixed for this... I think I got 'em all...
This is a clone of BadwolfVersion 1.2
*
A slightly futuristic and stencilesque design using halfwidth bricks.
The idea here was to make every glyph simple and minimal, not only in terms of overall geometry but individual line connections as well. Some glyphs are still more complex/less minimal than others, but I think it's a good amount of variety.
Version 1.1: Improved gy&Ѐ.
*
A greatly condensed Modron March.
This is a clone of Modron MarchA variant of Tangereen 3. Hard to read, but has a certain ornamental appeal.
Lately, I've been busy learning 3D modeling, vector art, and digital art things. So I only envision myself making more FontStructions when I need them for an existing project. I've already done all the designs based on my own past work - or at least, all the ones that are possible to create here.
This is a clone of Tangereen 3Version 1.1: Several glyphs (BKMRWXkmwx38&{}µÆæß³Œœ™) were edited for readability and þ was edited to distinguish it from Þ.
*
A font made for a friend's board game!
This gives me a strong "film credits" feeling with its high impact and simple geometry.
Version 1.1: Added Polish.
*
A combination of deco, sci-fi and modern elements.
This was made to be a compact subheader font and to be used alongside fonts such as "Badwolf". In fact the original name of this font was "Chibi Wolfclan".
A vaguely Courierlike OSD (Onscreen Display) font which tries its best to be casual. The name is inspired by the old computer joke: "Who is General Failure and why is he reading my hard disk?"
No filters or faux-beziers, just stock bricks and a bit of stacking/nudging!
*
More about the design:
It started as a doodle and an attempt to make a smooth, low-resolution, low-poly font, and then it became a Courierlike. I have other fonts that tried to do polygonal round shapes before this (such as Cartoon Riot) but this design is my first real success in this area.
Initially, I made the angled glyphs before the round ones. I didn't want to change the angled ones, so glyphs like C, O, and Q became a bit wider than they are tall. I'm quite fond of this, because in most designs these glyphs tend to have a tall and narrow character. I think the mildly squat look of this font makes it cuter and gives it more personality.
A lot of glyphs were altered in specific ways to look more like metal type, especially anything with diacritics which touch the letters themselves. Other glyphs were altered specifically to be interpretable at small size. I also use angled contours and actual round bricks alongside each other within the same glyphs, another technique which is geared toward style and interpretability at small size.
This font came with many new challenges and an array of new techniques had to be designed. Loops were an insurmountable challenge because of the low resolution and heavy line weight, so I drew rounded areas to suggest them. You can see it on letters like Greek γ, ζ, and ξ.
A half-sized, filterless version of Comicool Unicase which also has square terminals.
This has lowercase, but is made for all-caps comic book style lettering, so consider the lowercase as something added for accessibility's sake...
A slightly chimeric sci-fi design with no relation to Space Blam, Space Clam, Space Cram, Space Dam, Space Fam, Space Flam, Space Gram, Space Ham, Space Jam, Space Kazaam, Space Ma'am, Space Pram, Space Ram, Space Sam, Space Slam, Space Spam, Space Tram, or Space Yam.
In making this I attempted to achieve a harmony between angles and curves. You can see it especially well on "B", "3", "8", and "&".
A continuation of ideas in Candylander Plain. Half-arcs couple with short ascenders and descenders to make this.
Calculator font with a 7-segment display. This should bring many of you back to school, but in a good way, I hope.
This one belongs to a small family called Calculatrix.
I've allowed "MWmw+" to break the grid because they were impossible to render otherwise...
Did/do you ever use oldschool calculators to write funny messages? Post your best calculator words in a comment! :D
I took the line width variation of Art Deco fonts and turned it 90 degrees to create something bottom-heavy. The result looks really technological and reminds me of 1980s PC microsystems like the Sharp x86000, BBC Micro, Dragon32, and so on.
Version 1.1: More Latin added.
*
Haven't done anything like this in a long while. This is a form of pseudocursive script, and it's termed this because many forms deviate from the cursive standards. I had to find my own solutions to account for different types of loops and to add details.
When life gives you halflemons, make Halfade!
*
This is what I call a Plain Spurless design. There are no actual spurs, only right-angled corners to suggest spurs. All lowercase letters are like this except r, which is a Rounded Spurless because it needs to curve to avoid looking like Γ, and because it's only 2 bricks wide so there's no other place for it to curve.
I made this to have mostly right angles, to have a condensed look (see filrt), and to be good for speedreading. My own experiments in speedreading favored glyphs with simple curves which don't terminate in small arcs (see CGJSZfgjrsyz@()[]{}). There are exceptions (c2369?$) because these are more recognizeable when they have such arcs. Additionally, glyphs such as BPRXY have slightly rounded counters near the vertical center, which enhanced their readability without causing them to look out of place.
The remainder of design considerations were things which are fairly idiosyncratic and unlikely to be discovered by others. For instance, the descender of Q is 2 bricks, while lowercase letters' descenders are 3 bricks and symbols' descenders are 1 brick. This is the result of a technique that attempts to visually codify different cases & types of glyphs. The slightly different contours thus formed by each word on its underside seem to enhance both readability and aesthetics.
Version 0.5
*
A font made for a LuneKnight, a Terraria mod by yours truly. It gets its name because parts of it remind me of halberd, partisan, and/or axe heads. I designed this to have the vaguely authoritation look of a Didone as well as a borderline-gaudy look that prevents this from being taken too seriously. These changes lent some much-needed character to the prototypical Didone from which this design evolved. The uppercase letters are more heavily ornamented, as if to suggest that they are letters from an illuminated manuscript.
The main texture is a diamond pattern inspired by vent holes in medieval armor. These were often made with a square punch, and help the font look more handmade. Actually, most of the quirks this font possesses are present to help present a handmade look.
*
Notes
The wider letters are incised, which seems to lessen their perceived wideness by breaking up the shapes. For me this effect lent a more natural flow to the reading.
The ornamentation rules are complicated and factor in lettershapes, English letter frequency, and the existing design parameters. One thing I can concisely explain is that glyphs which normally look fairly plain are ornamented to such an extent that they make others look plain instead (CGJLT1 among others).
A combination of many small disparate elements. Like "Space Wham" it tries to harmonize angles and curves, but it does it by letting complementary glyphs have them as opposed to using them both in a given glyph. I broke this rule to make "Marrada Angle", though.
This is a cloneA font which uses some custom macaroni bricks. This one has the same kind of structural asymmetry as Phenomenologist. Angles and corners on the left are almost always sharper than those on the right, which gives glyphs a structural asymmetry as well as a sense of rightward momentum. This technique also imparts variation to some otherwise very similar letterforms (bdpq, mw, sz).
This is named for a species of android from Doctor Who.
*
Other design decisions:
- Make the ascender height shorter than the uppercase
- Use squares for dots/diaresis and circles for punctuation, so that they are more quickly distinguished
- Allow the sharp curve and gentle curve to swap positions when it's beneficial to the glyph (BX8&)
- Incorporate angled lines into several glyphs so that none of the glyphs which have them seem out of place (SZsz012569*~$)
- Ignore the other design decisions for glyphs which need a standardized look due to their use in programming and other syntax-based forms of writing (most symbols & punctuation)
Version 1.5
*
A font made in the proto-calligraphic style I invented and used when I was a teenager. I haven't owned a nibbed pen since those days, so this font is as far as the style was ever allowed to evolve. It's somewhat lacking the handwritten character my writing had, but this regularity is the result I was trying to achieve. I had no particular use in mind for the style other than titling documents. For that reason I consider this to be a Headliner.
"I" is kerned to itself so that it can be used to make nicer-looking Roman numerals.
*
See also:Basalt Pixel
Version 1.1
*
A fusion of art deco- and Navajo-style design. Well, many civilizations used a square zigzag pattern such as this, but "Navajo" always comes first to mind when I look at this design.
*
See also: Badwolf