Pieter, Favorites

279 914027 Published: 11th March, 2016
Last edited: 14th March, 2016
Created: 7th March, 2016

A back-to-basics, Bauhaus-ey, geometric sans serif. Some of the shapes (G and S) are a bit unconventional due to the small grid, but I think they are fairly legible.

Creative Commons

111 29517 Published: 4th March, 2016
Last edited: 5th March, 2016
Created: 23rd February, 2016
Clone of angles.This is a clone

Sans Serif

FontStruct License

451 737638 Published: 21st June, 2015
Last edited: 24th June, 2015
Created: 29th April, 2015
This font almost made itself, when I found out that you could make an almost regular hexagon with vertical segments 9 bricks long and angled segments at 4*sqrt(5) = 8.94

Display

Creative Commons

373 2938466 Published: 9th June, 2015
Last edited: 10th June, 2015
Created: 7th June, 2015
I suddenly had a lot of time on my hands, which resulted in this font. The initial idea was to make a font inspired by the (handwritten?) signs in retail stores, but it quickly took a turn for the more comic.

Handwritten

Creative Commons

277 831335 Published: 15th March, 2015
Last edited: 16th March, 2019
Created: 4th March, 2015
This is a clone of mandatetrinkaAA60

Double

Creative Commons

109 2018228 Published: 11th December, 2014
Last edited: 7th January, 2015
Created: 1st December, 2014
I stacked some propeller bricks and some composites of the kite bricks, which allowed me to make a nice lightning bolt inside each letter's bowl.

Display

Creative Commons

4 4883127 Published: 10th May, 2014
Last edited: 15th May, 2014
Created: 10th May, 2014
Three dimensional letters look as if carved out of blocks of diagonally layered black and white material.This is a clone

75 6125113 Published: 24th March, 2014
Last edited: 28th March, 2014
Created: 20th March, 2014
Upright italic for "Computer says no". Some of the characters are a bit extreme in order to get a more italic feel. What do you think? I am going to change cyrillic later...This is a clone of Computer says no

Monospaced

Creative Commons

4054 31268871 Published: 27th February, 2014
Last edited: 13th February, 2015
Created: 23rd February, 2014
Something as simple and boring as a monospaced, octagonal, sans serif font. But it has great unicode support!

Creative Commons

3854 166253338 Published: 23rd January, 2014
Last edited: 26th October, 2017
Created: 19th January, 2014

My final entry in the competition. Inspired by Mazey, zlabyrinths eYe/FS, and wavelength. Each glyph has its own maze, and each maze connects with the next. Tilde ~ and low line _ connect words, grave ` closes beginnings and ends, and the left and right arrows < > are for the start and end. There are also some alternates in Extended Latin A. Suggestions and critiques are welcome. Thanks!

UPDATES:
04/06/14 The whole font has been updated to be one brick taller, and thus properly fit onto a grid. Also, some characters have been redesigned. V2.0
05/13/14 All punctuation has been modified to continue a word maze. V2.1
07/05/14 1000 downloads! Hooray! As a 'thank you', I've completed more of More Latin. V2.2
08/22/14 I've made the accents part of the maze. I've also changed a few characters, and added Œ and œ. V2.3
08/04/15 Added Polish support with Ą, Ć, Ę, Ł, Ń, Ś, Ź, and Ż. Tweaked a few characters as well, and added a crossbar to the ð. V2.4

06/18/16 Added support for multiple languages with more Cyrillic chars and punctuation. Also tweaked a few chars.

FontStruct License

217 2330528 Published: 11th November, 2013
Last edited: 11th December, 2013
Created: 5th November, 2013
Utilizing the propeller bricks to make curves with split ends. To make banner ends use (parentheses) and [square brackets], and use the underscore between letters to continue the banner. Here is an [e_x_a_m_p_l_e)

Ribbon

Creative Commons

422 207559 Published: 23rd October, 2013
Last edited: 29th October, 2013
Created: 21st October, 2013
A font, in which every character consists of two or more interlocking shapes. Slightly inspired by Thalamic's "fs Six Sticks". I might do some alternates in the lower case area, and possibly also numbers. But I really shouldn't. Funny how creativity flows, when you should be doing something else :p

Connected

Creative Commons

395 3380157 Published: 26th July, 2010
Last edited: 15th August, 2010
Created: 24th July, 2010
Another script experiment, again with a pinch of blackletter, but also with a solid lacing of rock'n'roll... For the fun/easiness of it, this was done with pre-2.0-features only. Funny how this already gives is an old-school feel. :)

A lot of refinement is still to be done... Suggestions are, as always, welcome!

And I will probably add some more latin characters soon...

For some more samples, check my blog!

Creative Commons

132 142462 Published: 30th March, 2010
Last edited: 19th May, 2011
Created: 23rd March, 2010

Picture/Symbol

Patterns

Creative Commons

32 16836 Published: 20th March, 2010
Last edited: 21st March, 2010
Created: 20th March, 2010
Clone of Études pour Noir et Blanc 02 (Vertebrae).This is a clone of Études Typographiques 02

Creative Commons

153 98649 Published: 1st February, 2010
Last edited: 22nd December, 2010
Created: 31st January, 2010
Inspired by a picture found on this website.

Another diagonal line font so soon after fs Overlap. A mere coincidence. The application of each is very different. Overlap is about negative space while I-Tilic is about patterns and meta shapes. Post samples if you end-up playing with this fontstruction. Have fun.

[ = fi ligature
] = ti ligature
< = background fill (negative)
> = background fill (positive)
` = reverse tile (above base line)
~ = reverse tile (full height)
{ = top border
} = bottom border
| = side border

Display

Striped

50 1517814 Published: 31st October, 2009
Last edited: 8th January, 2012
Created: 23rd October, 2009
A slab serif face with minimal design and pixel font roots.This is a clone

Creative Commons

73 117017 Published: 27th August, 2009
Last edited: 20th February, 2010
Created: 27th August, 2009

Display

Hexagonal

2118 9765219 Published: 22nd July, 2009
Last edited: 11th June, 2013
Created: 20th July, 2009
Well, apparently everybody here likes building letters... And I'm sure everybody got told at least once to finally shut down that damn computer while fontstructing. Here's how you can go on tinkering fonts even with the computer unplugged!;)

I had carried this idea around with me a long time ago, doing some sketches, but abandoning it cause I thought all the thin and dotted lines would go beyond fontstruct's possibilities. Until funk_king proved me wrong... Thanks for the re-inspiration!

I think this is pretty self-explaining. Cut along the solid lines, fold along the dotted lines and put some glue on the shaded parts, put it all together, and there you go with your new toys!

Unfortunately it was impossible to fill all the inner sides of all the counters, but I tried to leave them open where you'd see it least. There might also be some bugs, I haven't tried them out yet. Pure brainwork so far... (My brain's still in the freezer to cool down a bit) In case someone ever actually uses them and finds something wrong, please let me know!
Hope you like it!:)

Check out the fill font if you wanna print your own custom-made design on the letters!

Display

Folded

Creative Commons

116 79724 Published: 12th July, 2009
Last edited: 11th February, 2012
Created: 17th May, 2009
This is a Fontstruct adaptation of an earlier work. The main point was to construct a font using exclusively one shape: the triangle. It was like creating a pixel font for a screen with triangular pixels. Of course, the original has equilateral triangles, and looks slightly different. It is also in the same vein as Legolas Codex. This is a clone of Legolas Stencil

Display

Creative Commons

258 825521 Published: 7th July, 2009
Last edited: 8th January, 2012
Created: 5th July, 2009
I thought there was more potential in this font. So I streamlined the glyphs a bit to get a consistent look. I've also added a nearly full set of European and a complete set of Russian characters. This is a clone of Gilgalad

Creative Commons

53 21137 Published: 15th May, 2009
Last edited: 12th August, 2009
Created: 14th May, 2009
This is my first Fontstruct composition. Any comment is welcome. Kerning needs some fine tuning. Any idea how to add ligatures?

Creative Commons

74 21578 Published: 13th April, 2009
Last edited: 16th June, 2009
Created: 13th April, 2009

Clone of Font Pixel – a pixel variant of Trade Gothic.

This is the Old Style (or non-lining) numeral version of Font Pixel. Enjoy

If you do decide to use Font Pixel OS, we'd be chuffed if you emailed us images of your work, thanks.

This is a clone of Font Pixel

Pixel Optimized

Creative Commons

27 33274 Published: 6th March, 2009
Last edited: 11th March, 2009
Created: 6th March, 2009
This font is based on the Mini7 font created by Joe Gillespie, and contains some more characters than the original font does, but it also misses some characters that the original font has, because these characters isn't available in FontStruct yet (AFAIK). I have also made an alternative Q with a descender, like the one in the Silkscreen/Slikscreen font, you will find this as the lowercase Q, while the uppercase Q is the same as in Mini7 with no descenders.This is a clone of Slikscreen

Creative Commons

143 94615 Published: 20th October, 2008
Last edited: 25th November, 2009
Created: 19th October, 2008
Dedicated to Team FontStruct. Thanks, guys. :)

Single column blank grid at | and full character blank grid at _.

Display

Ziplock

Kolya Regular

Hexagonia

Kapow

mandatetrinkaAC60

Bolt

Zebroid

Computer says no Italic

Computer says no

fs lost

Ribbons and banners

Interlock

High Voltage

Vortices

Études Typographiques 02B

fs I-Tilic

Belfalas

fs La Cross

Punched Out

Nimrodel

Gilgalad v2

Gilgalad

Font Pixel OS

Se7en of Nine

fs FontStructor