Version 1.5
*
A font made in the proto-calligraphic style I invented and used when I was a teenager. I haven't owned a nibbed pen since those days, so this font is as far as the style was ever allowed to evolve. It's somewhat lacking the handwritten character my writing had, but this regularity is the result I was trying to achieve. I had no particular use in mind for the style other than titling documents. For that reason I consider this to be a Headliner.
"I" is kerned to itself so that it can be used to make nicer-looking Roman numerals.
*
See also:Basalt Pixel
A design that looks like a top-down view of ziggurats!
I composited the diacritics so they'd fit into place, but this means that most anything non-English needs to be pretty large to be unambiguously read...
The Zephiest of designs - a gaggle of Roman columns with gongs stacked on them.
A combination of many small disparate elements. Like "Space Wham" it tries to harmonize angles and curves, but it does it by letting complementary glyphs have them as opposed to using them both in a given glyph. I broke this rule to make "Marrada Angle", though.
This is a cloneVersion 1.5
*
Experimental slab-serif. The added height from the serifs is quantized so that the serifs, rather than the normal lines, determine a glyph's geometry.
It reminds me of the Wild West and the old cartoon "The Jetsons" at the same time. It uses two kinds of serifs: normal slabs and "hangover" serifs. The hangovers are the ones that look like overhangs. Is there another name for them? I don't know.
This font is set to appear in several games at once! I'm not the developer of any of them! WOO
Despite what you may have heard, a "hoedown" is just a party.
A dashed line design made with the new half-arc bricks. The emphasized spurs/stems and off-kilter geometry give it a quirky, almost handwritten quality. Its striped appearance makes me think of candy as well as the Cheshire Cat, thus the name. :D
I doubt the upper case would look as cute as the lower. So I've cloned all LC to UC to make this easier to use...
By request, a skewed, spooky sans-serif.
"Xenopyre" is an anagram of "Pyroxene", in much the same way as this design is an analogue of Basalt.
*
See also:Basalt, Dethzmezenger
An ornate Goud with lots o' thorns! Now with MORE THORNS.
This is a clone of GoudAn inverted alternate version of Spiderling that's glitch-free... for now, at least!
I think this doesn't look nearly as spider-like as the original... your mileage may vary...
Version 1.0
*
A slightly quirky font made to be good for chat and marquee display. The global matrix is 8 pixels tall. This works well for IRC clients, MUD clients, and so on. Supports Dutch, English, and Greek!
*
Original size: 6pt
When life gives you halflemons, make Halfade!
*
This is what I call a Plain Spurless design. There are no actual spurs, only right-angled corners to suggest spurs. All lowercase letters are like this except r, which is a Rounded Spurless because it needs to curve to avoid looking like Γ, and because it's only 2 bricks wide so there's no other place for it to curve.
I made this to have mostly right angles, to have a condensed look (see filrt), and to be good for speedreading. My own experiments in speedreading favored glyphs with simple curves which don't terminate in small arcs (see CGJSZfgjrsyz@()[]{}). There are exceptions (c2369?$) because these are more recognizeable when they have such arcs. Additionally, glyphs such as BPRXY have slightly rounded counters near the vertical center, which enhanced their readability without causing them to look out of place.
The remainder of design considerations were things which are fairly idiosyncratic and unlikely to be discovered by others. For instance, the descender of Q is 2 bricks, while lowercase letters' descenders are 3 bricks and symbols' descenders are 1 brick. This is the result of a technique that attempts to visually codify different cases & types of glyphs. The slightly different contours thus formed by each word on its underside seem to enhance both readability and aesthetics.
A "Connect bricks" font.
It's called linestrider because the outline strides across the inline on both sides. It also reminds me of the courses that are drawn for line-following robots.
The person I made this for requested lowercase. I'll add it as I can.
Experimental sliced sans serif. My goal here was to make a design which would result in an extremely compact and durable physical stencil. Almost all of the sharp points and acute angles are within the negative space, so it should be easy and very safe to make, handle and work with this stencil.
*
Version History
1.3 - added More Latin and Google Fonts Basic bands.
1.2 - added uppercase, changed name to "Aegris Stencil".
1.1 - edited for more readability at small size. Glyphs with enclosed loops were altered so that the "movement" of the segments always runs clockwise.
1.0 - released.
Version 1.1: KRX were modified to be more readable at small size, MQW14'"@ were edited for style, Basic Latin band completed, More Latin band underway.
*
A font made by request for an author of custom Warhammer 40K modules.
Iterated version of an unreleased design called "Midnight Oil". It's also slightly related to Dethzmezenger and Gehenna.
I went against a few of my own conventions for this one. The close spacing might look a bit strange at times, but it eliminates the need for kerning while also creating a unique look. The overlapping spurs make me think of thorny plants!
This is an original design, but it does make me think of Planescape: Torment when I look at it, thus the name!
A variant of Bulwarx Pixel which uses halftones to save 64% more ink than the original.
The second halftone is 60*60 (3600px) within a 100*100 (10000px) canvas. So, this halftone fills only 36% of the grid square, and yet it remains solid-looking even at 2x Original size. I think this is therefore the best single halftone on FS for actual printing purposes. Of course, modern printers are likely to be accurate enough to print this with the grid squares showing...
This is a clone of Bulwarx PixelA continuation of Tangereen. This version took a lot of figuring out and a lot of changes, both aesthetic and structural. I managed to make it different from other double-line designs like Glitzfang and Junglira while still keeping it simple and cute.
This is used in FS Tutorials, FS Idea Soup, FS Obscura, and most recently, AMFA's 3D printed parts.
This is a clone of TangereenAn avantgarde serif with a mild horror theme. It takes advantage of the properties of antialiasing/text smoothing algorithms to render a convincingly handmade aesthetic.
Making attractive, consistent, nonpixel serif designs at this grid size is quite a challenge. Making them look handmade is even moreso. I've tried that many times, but this design is the first such one I felt was truly usable. It doesn't quite look typewriter-esque, but blends well with other designs that are.
For this I used many different serif shapes, with each one depending on how the line it was attached to wanted to bend or terminate. This is in contrast to most other serif designs I've seen, in which the serifs themselves are more consistent in shape. I decided against faux-bezier curves for this, because they all looked way too polygonal. I think this is one of few cases where a rectangular O and S enhance the overall design rather than weakening it.
Pixel demake of Goud. This is easily the best Goud for body text, as it remains crisp at all sizes!
*
Original size: 9pt (use multiples of this value for pixel perfection)
A continuation of ideas in Candylander Plain. Half-arcs couple with short ascenders and descenders to make this.
Version 1.1: More Latin added.
*
Haven't done anything like this in a long while. This is a form of pseudocursive script, and it's termed this because many forms deviate from the cursive standards. I had to find my own solutions to account for different types of loops and to add details.
By request, a polygonal font with a slightly militaristic feeling.
The truncated polygonal perimeter of most glyphs is somewhat inspired by the lettering on World War I planes, tanks, and ships. These forms of lettering tended to have more square aspect ratios. I changed that to give this font more personality and to condense it so more text could fit on a line.
In terms of what modern military setting this might fit into, it looks very Air Force- or Navy-esque to my eye. Check out contemporary video games and recruitment materials relating to those two branches and you'll see what I mean.
A design that combines tropes from fantasy, sci-fi, and sports in a subtle and pixel-optimized way.
Structurally, this looks like a high-res version of Marengi Mk2. There are still plenty of differences between the two, but since they seem equally readable to me, I'm tagging this as a chat font.