A little experiment with the "connect" bricks (and an healty dose of stacking). I wasn't referencing any specific example of the style (of which there are many), but I'm sure that, looking for solutions as I went, I ended up with something similar to already existing typefaces (and fontstructions).
Unfortunately, some connecting bricks don't align exactly, so I had to resort to approximate them, when possible, with more stacking, which didn't particularly help the already lacking consistency in construction.
But enough moaning, enjoy!
RINKEL — Bold constructivist display design
════════════════════════════════════
This was very much influenced by the rare sighting of
1974's Lettergraphics International typeface by the name 'Belden'
Belden was shown in a Lettergraphics ad in U&lc vol. 1, no. 3 from 1974, without further design credits. It was also featured in the book cover design for "Metaphysics: An Introduction" by Keith Campbell.
—Which in terms I have used for my personal extrapolation of the complete character set of this FontStruction.
────────────────────────────────────
Not a digitizing revival of the original piece, but rather a very strongly inspired personal take on it.
—More complete character set is coming soon..
Let me know what u fellow structivists think of it so far!
Cheers
Opening day of Marvel's Black Panther 2: Wakanda Forever!
I started this late and suffered the consequences, but had to release something. This took a long time and didn't look like how I wanted it to or as good as I wanted it to, but there it is. WIP as I attempt to clean up and adust stuff.
ALIEN WORMHOLE (BOLD) - Monolinear Sci-Fi-inspired 'worm' typeface.
═════════════════════════════════════
This is a 'Bold' style version to the "ALIEN WORMHOLE" type family.
This version has a ton of extra character compared to the 'Light' version.
For now only the two 'Basic Latin' sets, some symbols and a small number of puctuation marks match. And it remains to be seen if I can translate back to the Light version all those extra's that were put into this Bold version.
I mentioned 'type family' earlier, but in reality there isn't a whole lot of family just yet. Since the two for now hardly correlate truly.
═════════════════════════════════════
Here is a link to the 'Light' version
═════════════════════════════════════
Stay tuned for future updates.
Cheers
This should have been a minimum font, but minimum can't do color.
The idea was to simulate transparency. After trying out multiple color hatch patterns, it was apparent that it is not going to work. The earlier attempts are left in the font for you to judge yourself their efficacy.
The file is pretty heavy because of having so many anchor points (times 8 layers). Scrolling will be slow. Because the next letter overlapping the previous hides part of the black outline, just outline glyphs are there to stack two layers (colored below, outline above) to get the correct effect.
Is there some trick to make the downloaded font to work in color? The version I downloaded comes as *-svg.ttf. Aren't the color svg fonts in .otf format? Thus, no sample.
Another optical experiment, testing border areas. Sorry if sometimes it's a bit hard to read and it shakes your vision, but that was the idea. It has only been possible using the colour options available to FontStruct Patrons. Thanks once again to Big Rob Meek. PS: "2 in 1 font", the black version of the SVG file also can works like an usual B/W font.
BLAUHAUS - Bold Bauhaus inspired geometric typeface.
I know there is tons of out there already, but I had to do one myself...
It's far from perfect, but it was made on a very tiny grid space, so a whole lot of space to occupy with bricks wasn't a luxury this one! (I'll demonstrate a example below)
Still I think it looks pretty rad so far!
This is a cloneThe heavy version of Capsaicin released back in 2020. Adding thickness wasn't that straightforward due to brick limitations. Alternate construction methods were implemented on the glyphs to create similar inktraps without sacrificing the innate qualities of the typeface.
I would like to continue working on it to make it more visually consistent, but I'll stop at this moment or else it might be a perpetual WIP.
I love these kinds of fonts that have geometric puzzle-solving quality in the design. I was quite happy with how the lowercase found a way to be connected. Then I thought let me not mess with anything else. But a Z is so much like a 2, so I created the 2 out of the Z. Then when 2 was done, I was aprehensive of tackling the 1 because the vertical stem would be off by one brick, and how would that be resolved. Reluctantly I tried it...and it worked. 3 can be created from the B, but the B hasn't been created yet. OK, I guess I have to do the uppercase. A was easy. B was surpringly easy. Which gave me motivation to go on. And surprisingly soon, the whole thing came together. The hardest letters to shape were X and S. Not all letters are very successful, but they are distinctive enough to be recognized as themselves. Not sure about the =, but it will do, I suppose. In any case, no kerning required.
Trying an unusual oblique way to spacing the parts in a stencil font. Looking at the glyphs, I'm not entirely satisfied with the final awelcome. Thanks in advance. ❤️ I'm not entirely satisfied with the final aspect of my "s", any suggestion to improve it (or also for other letters) are welcome.
EPOCH - Modern light-weight geometric display sans
───── 「 MEASURES 」
(in grid units)
X-Height: 1
Cap-Height: 2
Descent: 1
Optical Corrections: None
Stroke: 1/8 th
4-Em / 0.125 : 1-Stroke (0.125 ≍ 1/8 th)
― No filters used.
───── 「 SUMMARY 」
This is yet another deep dive into the very small and tiny quantum realm of FontStruct's small grid and light-weight stokes.
Unlike some of my previous endeavours into this dark corner of the FS-editor, which could have dizzying complexity in forms, this project for once didn't stress the sh....*t out of me by stretching the limits for my capabilities beyond what is still comfortable this time. Nor did it drain every last frigging bit of my knowledge or clever creative insight to pull it off.
On the contrary,
For once it remained largely a pretty straight forward and easy project in terms of forms and geometry. The absence for most of the 'bar-raising' features such as diagonal forms, rounded, transitions or stroke modulation made this 'FontStruction' that much more easy.
And when metaphorically breaking it down to the bare naked form and necessities, this design mainly consist of FS's (default)-brick set, resized modifications of those, combined with a set of stacked composites.
There a still a number of things I'd rather seen differently, and will see later attempts at making improvement, but taken in a broad perspective most of the included material so far look pretty fine to me already. And to point out one of the things that is still bugging actually are the 'accented' letters.
Some glyphs have odd values for their 'character'-width, and this makes it impossible to achieve 'grid to em-square'-bounding box allignement in FS's editor. So accents in these asymmetrical values look slightly ofset.
― "Changing character widths to nearest even value is simply far too destructive to the stylish characteristics of the fonts appearance"
───── 「 ABOUT THE FONT 」
In the end it became a pretty cool looking light-weight geometric modernist sans-serif style that at the same time has strong hints of Art-Deco-style lettering as well.
And apart from the minor things it fell short with, I think there is a lot about its overall character-set design and forms that is looking pretty darn rad actually if you ask me.
Content-wise the font is a single case design in a 'all-caps' or Majuscule style. The (Lc)-string was kept empty for deliberately for the technical reason of preserving all the (default)-blank metrics data for any further design updates.
───── 「 WHATS INSIDE 」
A little bit of everything...
■ Body text formatting:
□ Basic-Latin based character set with accented letters & numerals
□ Most punctuation marks
□ Numerous symbols
■ Decorative formatting
□ Pictorial attributes
□ Repeating patterns
───── 「 THE END 」
Let me know what you think so far,
Cheers
Unicase with alternates (a, e, m, n, u...). You can find also an extra "&" at the ™ glyph and a "c" at the ¢. Inspired on the wonderful Goliath (1970) by Vincent Pacella, but with its own personallity.
FORMALISMS - Modernist inline display type
Rigid square-based inlined modernist display style with incised (fake-) 3D effect, mimicing a quirky and non-logical take on twisted geometric form and sometimes folded appearance.
Some characters, but mainly symbols still need slight improvements, some are still missing as well.
The bi-linear stroke was incised at certain specific positions and had one or more (cross-)intersecting line segment included that connect the two colinear strokes. This is creating 2 additional extra geometric hyper-planes, and allows the option of including the illusion of looking at three-dimensional geometric objects.
But the way this is implemented into the design in fact obeys no relationship to any actual fundamental propeties and isn't necessarily a correct three-dimensional form, nor fully or faithfuly folded.
The glyphs also have somewhat of a monogram logo style quality
Hope you like it
Cheers