An experiment -- Half-tone uses dots, so why not replace dots with pixels? Thus, Half-Pixel was born.
This is a clone of CASIOpeia (fx-7700G)24-segment display. This one belongs to a small family called Calculatrix.
Like Calculatrix 12, this one is spaced so that every segment appears in its proper place, as if the text were being rendered on one giant display. (If using this in your own software, you will want to check the line spacing as it can vary depending on the software.)
I suppose this font could be used for weaving or embroidery work, as well... it has that look about it...
TIP: Try zooming out while already at Pixel size!
Experimental 37-segment display. Space pirates met crystalline aliens, their children made a segmented display, and this is it.
Now with lowercase!
See also: Apoplexy, Calculatrix.
I was making some new bricks to add to Brick Basket when the idea of a segmented display made from composites occurred to me. The result is this experimental 25-segment display.
This achieves some interesting "double line"/"folded line" effects. It also gets some pecuilar distortions at smaller sizes.
This is a limited font, which has very few characters. This is based off of a 7 segment LCD display, and has a design that follows a format, unlike the other "7 segment display" fonts. Since this doesn't alter the design at all, it looks authentic and probably would work in an LCD. This is best used in all caps, but will work in lowercase.
This font displays each character as a seven segment representation of the binary value of the character according to the GSM 7-bit alphabet. The commercial at (@) has been swapped with the space as I don't know how I could have a blank character that isn't space. I put the escape character in place of the reverse solidus (\), and I put the carriage return and line feed characters in the place of the left and right square brackets respectively, as these characters are not represented in fonts.
This is a cloneELEKTRON AR-LCD 3_6×6 - Re-creation of the 6×6 dot matrix font that is used in the "Winstar WG12232A" 122×32 graphic LCD display module on the "Analog Rytm" drum machine by Elektron
====================================================
I used filters to mimic the original module's dot size and dot pitch:
Horizontal brick size:0,89
Vertical brick size:0,91
Horizontal grid scale:0,8
Vertical grid scale: 0,94
====================================================
This is just one of the fonts that is used in the "Analog Rytm", there is number of different font size and designs used throughout the device's OS. Used together to create clear hierarchy and structure in the individual components.
The other fonts:
ELEKTRON AR-LCD 1_6×6
ELEKTRON AR-LCD 2_5×8
Enjoy
This is a clone of STF_ELEKTRON AR-LCD 1_6×6Clone of a thick rounded 9-Segment LCD display . I changed its symetry more to my liking and set all segments to fit within the character 8 boundaries. It had only letters needed to indicate time, date, temperature or AM/PM, but I expanded it a bit later...
This is a clone of STF_9-SEGMENT LCD (ROUND)