A font that walks a thin line, even when it walks on its hands.
This font tries to use the half-arc brick to its greatest potential. Since this brick isn't the same width as the others, it causes the thin outboard lines to be cut a bit short. This in turn causes the eye to interpret the corners they form as rounded, even though the curved parts of the glyphs themselves are very small. In this way the half-arc brick helps create curves and harmonize them with angles.
An alternate, more asymmetrical & stylized Madmouse.
This could be considered an avantgarde spurless or mixed-spur design. Some letters have spurs and some don't. This is entirely dependent on the diagonal lines, which were placed so that they would slant up and to the right. "s27" are obvious exceptions.
This is a clone of MadmouseAn even smaller and more stylized take on Madcat/Madkitten. It isn't really a Decolike anymore, but it is readable at smaller sizes than almost all my other designs!
This uses some compression/truncation tricks to fit glyphs into a smaller grid. Those tricks are usually used in pixel designs (such as Chlorophyte) but I think they worked out well here, too!
This is a cloneBy request, a high-contrast, blocky connected-outline font. This will be used in some Roblox mods.
A few glyphs are a bit quirky compared to the rest (DQ7?= and any glyph with a median line). The requestor wanted them that way.
By request, an abstract, condensed, and slightly futuristic thinliner stencil.
This is similar to a fusion of "Migrator" and "Aegris Outline".
The metrics for this one are not finalized yet. Various versions of this are being tried out, and the feedback will affect how this font changes. (Presently, the overall spacing is a bit wider than the internal spacing of glyphs like “”).
By request, a small, abstract, Pseudostencil-esque design.
Version 1.1: More Latin added.
*
Haven't done anything like this in a long while. This is a form of pseudocursive script, and it's termed this because many forms deviate from the cursive standards. I had to find my own solutions to account for different types of loops and to add details.
By request. The name is Dwarvish for "Matchshattered" ("Equalshattered"), an artifact iron axe carried by Mosus in Kruggsmash's YouTube videos about Dwarf Fortress.
Numeral digits are to be seperated by spaces.
By request, a semimodular font which looks like a casual interpretation of "General Failure". This is also more condensed and more Pixel Optimized than its predecessor. It makes me think "fire station in a cartoon".
It uses a technique which folds some slabs in, which prevents slabs from altering the heights of letters - but slabs are still allowed to alter width to some extent. The slabs which do this are incorporated into glyphs' structures to such an extent that they are integral parts of the linework.
This could be kerned more closely, but like me, the requestor uses software which doesn't support kerning. Consider the spacing as part of the desired quirkiness.
A font made to be very economical.
This design uses as few unique shapes as possible. In addition to extensive rotations and flips (see AR, EMW, FL, GJUV, IHKT, NSZ25), glyphs are made so that they can be cut down to make other glyphs in as few cuts as possible (see BEI, used to make ACDFLMNOPRSWYZ1235689). Some other glyphs (see QX.,) then make use of the cut parts.
This means that, were these letters to be physically made, the maker would only need a few forms to start with and could cut the rest in only a few steps.
The name was chosen because of both a running joke between friends and because it was the coolest-looking phrase I tried when I auditioned the font.
A pixel art galaxy. 27*27 canvasses.
There are 12 distinct fonts lurking within this one. Spot 'em all and win a FREE Nothing!
Original size: 20.25pt (use multiples of this size for pixel perfection)
*
-= LEGEND =-
A - Space Shuttle, B - Planetoids, C - Alien, D - Space Station, E - Pulsars, F - Satellite/Telescope, G - Planet & Moons, H - Kempler Rosette, I - Bar Sign, J - Space Bar, K - Interstellar Planet/Dark Star, L - Double Sun Planet, M - Globular Cluster, N - Earth, O - Galactic Plane, P - Asteroids, Q - Alien in Saucer, R - Black Hole/Wormhole, S - Globular Cluster, T - Dyson Ring, U - Giant Star, V - FS Nebula, W - Nyan Cat, X - Starship Enterprise, Y - Star-Forming Region, Z - Planet & Rings
a - Space Armada, b - Dr. Wily, c - New Stars, d - Binary Star System, e - Colliding Galaxies, f - Space Pirates & Mothership, g - SpaceX Roadster, h - Colliding Planets, i - Space Drone/Probe, j - Colony Ships, k - Ringworld, l - Halfmoon/Destroyed Planet, m - Uninhabitable Planet, n - Solar Wind, o - Wrecked Spaceplane, p - Escape Pods, q - 'Oumuamua, r - Moon, s - Molecular Clouds, t - Navigational Buoy, u - Marx, v - Substellar Companions, w - M57 (Ring Nebula), x - Space Lodge, y - White Dwarves, z - Death Star
0 - Big Star, 1 - New Spiral Galaxy, 2 - Old Spiral Galaxy, 3 - Supernova, 4 - Exploded Star & Nebula, 5 - Planet X, 6 - Quasar, 7 - Cruiser, 8 - Hypernova, 9 - Gas Giant
+= - Space Hotdogs & Food Sign, / - Planet & Comets, ; - Gamma-Ray Burst, : - High-Tech Planet, ' - Dense-Atmosphere Planet, " - Space City, £ - TARDIS, € - Sinistar
.,?!@#$%^&*()-_{space}{nbsp} - Starfields & Map Markers
*
I add new art to this whenever I get more ideas. But I don't want the legend to be any longer than it is, so I leave the others for you to discover on your own.
A fusion of Junglira and Quartzthrone Harlequin. The result reminds me of railroad tracks, 35mm film, barberpoles, cactus heartwood, orb-weaver spider legs, and more!
Some symbols and diacritics are left untouched, either for legibility's sake or because they happened to fall on one of the non-shaded rows.
Structurally, this is Junglira, although I did round a lot of corners that were squared in the original.
*
See also:Navajo Deco
This is a clone of JungliraVersion 0.2: Improved all glyphs, added More Latin, changed name to "Letsago".
TODO: Make line widths more consistent, especially on numerals.
*
A friendly, but slightly obtuse font. I think these polygons are the smallest and simplest ones which can be made with stock FS bricks and used to create glyphs with a truly circular appearance. This only works up to a certain size before the look reverts to that of a polygonal sans-serif, but it works very well up to that point!
This is the culmination of knowledge gained from several other experiments, such as Marginalia. It should be very difficult to make a smoother font from this at the same grid size while still using stock FS bricks.
Some kerning is done, but the majority of it will be done once every glyph is considered to be perfected. For now, you can use vector software (like Inkscape) to manually kern pairs.
A vaguely Courierlike OSD (Onscreen Display) font which tries its best to be casual. The name is inspired by the old computer joke: "Who is General Failure and why is he reading my hard disk?"
No filters or faux-beziers, just stock bricks and a bit of stacking/nudging!
*
More about the design:
It started as a doodle and an attempt to make a smooth, low-resolution, low-poly font, and then it became a Courierlike. I have other fonts that tried to do polygonal round shapes before this (such as Cartoon Riot) but this design is my first real success in this area.
Initially, I made the angled glyphs before the round ones. I didn't want to change the angled ones, so glyphs like C, O, and Q became a bit wider than they are tall. I'm quite fond of this, because in most designs these glyphs tend to have a tall and narrow character. I think the mildly squat look of this font makes it cuter and gives it more personality.
A lot of glyphs were altered in specific ways to look more like metal type, especially anything with diacritics which touch the letters themselves. Other glyphs were altered specifically to be interpretable at small size. I also use angled contours and actual round bricks alongside each other within the same glyphs, another technique which is geared toward style and interpretability at small size.
This font came with many new challenges and an array of new techniques had to be designed. Loops were an insurmountable challenge because of the low resolution and heavy line weight, so I drew rounded areas to suggest them. You can see it on letters like Greek γ, ζ, and ξ.
A highly abstract, mandala-like segmented display which turns bodies of text into primitive starfields, complete with constellations, planets, and space debris. As it turns out, there are quite a lot of ways to write, draw, and encode information with this! Check out the sample text views and try preparing some text of your own in the User Input field.
The name, and the background of the sample art, are inspired by some art/lore from a friend. <3
I might make more designs like this for generating different kinds of art/textures. If I do, I'll probably scramble the display pieces among the alphabet. I didn't with this one, and for certain kinds of text input, that might show.
By request, a polygonal font with a slightly militaristic feeling.
The truncated polygonal perimeter of most glyphs is somewhat inspired by the lettering on World War I planes, tanks, and ships. These forms of lettering tended to have more square aspect ratios. I changed that to give this font more personality and to condense it so more text could fit on a line.
In terms of what modern military setting this might fit into, it looks very Air Force- or Navy-esque to my eye. Check out contemporary video games and recruitment materials relating to those two branches and you'll see what I mean.
Formerly known as "Specula".
*
By request, a font with the two-toned look of a Pokéball. No filters! The Pokédollar sign can be found on "¢" and a Pokéball is on "•".
"Eviolite" is an item that powers up the defenses of Pokémon that are not fully evolved. Looks like a lavender-colored gem.
A pixel font which combines four experimental techniques at once:
1. Structurally disconnecting the stems from the open parts of letters.
2. Allowing glyphs to extend beyond the reaches of width and starting position.
3. Designing glyphs specifically to connect and form new shapes, rather than simply allowing shapes to emerge from existing characteristics.
4. Designing glyphs so that the overall font is free of a need for kerning.
*
Alternates are now on UPPER CASE. I'll continue to update this as I get more ideas!
*
Original size: 6.75pt (use multiples of this value for pixel perfection)
I took the line width variation of Art Deco fonts and turned it 90 degrees to create something bottom-heavy. The result looks really technological and reminds me of 1980s PC microsystems like the Sharp x86000, BBC Micro, Dragon32, and so on.
By request, a chat/comics font which combines features of "Micro Machina" and "Chlorophyte". I took some other liberties with it as well in order to make it more distinctive (see MSVWacegjmtyz).
This turned out extremely well! It's more open and airy than many of my larger designs, and is pleasant and easy to read even at the original size.
Supports Dutch and English.
By request, "a font that looks like a hybrid of Greek and Latin".
This is designed to be modular. UPPER CASE contains the standard glyphs. Alternates are on the lowercase as well as the More Latin band.
"Novus Graecorum" means "The New Greek".
Supports Dutch, English, and Greek!
Just doodling!
It breaks up clusters of words wherever punctuation appears. This might help with reading it out loud, by showing how long a sentence is at a glance and making it very obvious where to pause.
The original form of Snake Basket. This design coils on itself, but not to the extent that it makes spirals.
Named for the eidotya, snakes that weave themselves together and perform synchronized movements with a flock-like mentality. They're fictional and found in my own video games, of course!
This is a clone of Snake Basket