Musician/Type designer/Mashup artist
• BANDCAMP / My music
• MY "JURRIAAN SCHROFER" SERIES
Tools for font testing
Personal URL | https://www.behance.net/Sed4tives |
Fontstructing since | 1st December, 2017 |
Fontstructions | 365 shared, 79 staff picks |
Shared Glyphs | 59297 |
Downloads | 13988 downloads made of this designer’s work |
Comments Made | 2797 |
Collection of linear-interpolated circle attempts, or simply faux-Bezier circles and other curvature related materials.
This toolset basically is collection of pre-made fake circles and curves in numerous different sizes to make ones workflow easier. It could also simply serve as a educative tool that demonstrates the basic FontStruct technique used for making fake curves and circles.
Initially I intended this to be much more complete, but it is simply too much work, and would take forever to get published at once.
Please don't expect this to be perfect, a lot gets fairly close to the "real-deal".
But keep in mind that they remain raw approximations of their true Bezier counterparts. I will try to improve whatever is needed as time progresses, as well as most likely add more stuff.
--- No filters were used ---
I hope you like it so far,
Feel free to copy, re-use, improve or even destroy!
enjoy!
Here is a gift to the community.
-----------------------------------------
This is a collection with parts and bits for small grid designs, (5x5 max) Each related to the assembly of smooth and (near) Bézier-like curved shapes and round letterforms.
-----------------------------------------
As some of you might very well know, one of FontStruct's holy grail is custom circular and curved forms. I'm talking about those not simply build with off-the-shelf bricks from the standard brick pallet FontStruct is providing.
Making these can be a very difficult process. Since the bricks in the default pallet are a far cry from what is truly possible with some clever use of FontStruct's editor features. Although obviously there remain serious limitations when it comes down to making different curves and round forms, there still is a lot room available to work in.
Most of the seasoned users know and utilize this very well, but, as with each of us, it took time and dedication in order to learn the tricks of the trade!
With a little knowledge, clever thinking and a healthy dose of outside the box thinking one can still get a lot out of FontStruct.
This font is meant to serve as a helping hand and inspirational / educative tool. Providing some insight into making numerous curving and rounded forms, various transitions, achieving different weight contrasts, and how all the various building blocks were aligned in order to make the various parts.
-----------------------------------------
Most important features used for this process are:
Brick Size filter: Must be changed to a 2×2 value in order to use the elements in this font.
All functions found in the "Modify" menu: Flip rotation and nudge are used to make alignments and to fill up the gaps.
Make composite: (also found in the Modify menu) This function will mainly be used to do two tasks, resize, modify/distort brick shape,
placement and orientation of bricks within the brick grid square for the required given composite.
-----------------------------------------
The font itself contains a collection of different premade elements divided into 3 main groups that I will list bellow. And can be found in the uppercase, lowercase and numerals sections.
[Uppercase] Various pre-assembled variations of the letter O, to demonstrate different variations for a round letterform. These were sub-divided and grouped according to their relative height!
[Lowercase] "Copy & Paste"-ready isolated parts 'n bits (curve segments, terminals) aimed at re-constructing and use in your own projects
[Numerals] Various random examples of letters that have curved/round features implemented in some way.
A fonts height probably is the most dictating parameter in type design in terms of behavior and appearance. Therefor, with the collection of pre-build vatiations of the letter "O", I choose its relative height to further sub-divide them in, rather than weight, since these are already completed letterforms. This makes up for the easiest access to a "drag/drop" adaptation into one's own project and build a full font based upon it, mainly for those that come with only limited experience.
This tool is to make one's FontStuct experience a little easier or to save time. So feel free to clone it and use the content however you like.
Re-use any of the provided elements, copy/paste the letter examples into your own fonts, deconstruct and re-use the various parts. Or simply just take a peek under the hood to see how they were build, This can be done via the "Menu>View>'Outline' " function.
There are no restrictions to how the content is used.
-----------------------------------------
More additional curve variations and different related other elements will be added soon. I have to select them from my various random works and this takes some time. Please stick with me on this one.
The intent is to try keeping this a ongoing project, so hopefully many more updates will follow and eventually turn this into a "all-in-one" tool for small grid designs. So far I also have plans for including a collection with different serif style, but this is something for a future update as well!
For now, curvatures it is!
-----------------------------------------
Note that, all content and forms in this font were created by myself and were gather from the various projects I have made, most came from published works, but some were taken from private material as well. We all here work with the same tool + limited brick set, so I am pretty sure certain elements in here were done exactly the same way by other users. Please don't accuse me of using others or your material without approval, this is just a case of unfortunate coincidence.
-----------------------------------------
[Usage]
The elements are best used by way of copying them from this into your personal projects, and work with it from there! This because the "My Bricks" pallet in this font is messy, probably very uncomfortable to work with as is. Copy & pasting them into your own font re-arranges the selected brick set for that segment into your own font's "My Bricks" pallet, making it much easier to get sense of its individual bricks.
Another very important thing is, I strongly advice not to nudge any of these what so ever, unless investigated its composition first. And I cannot rephrase this enough, seriously, never, or brace yourself for absolute dire results!
This due to the numerous counter-rotated or different directions of nudged 'into place' elements that make up a complete segment.
There are some elements included that at first seems to be looking like doubles, with onother one looking exactly the same. This is right, but these are constructed using different configurations of bricks. The reason for this is to provide alternative configurations for them. Some scenario's can make one approach to be working just fine, and the other simply not. This all hangs in strong correlation with the current nearby configuration of bricks, and simply depends on the whatever spot still remains unused in the surrounding grid. Since available grid locations to start working from are usually very limited. Its like this, Taller and/or wider letterforms meaning more available space to work from and place your bricks, but the smaller you go, the more scarce space becomes, simple as that.
So best is to use and work with this tool on a copy of your current glyph to verify no bricks will be raplaced and ruin the current glyps, and only to replace the original glyph once you're absolutely sure everything worked out well together.
If something else isn't clear or if you have any questions in regard to this tool, feel free to ask those in the comment section bellow.
-----------------------------------------
One final thing, beware that some of this elements can possibly influence the font vertical metrics (font size and leading/vertical spacing) and create addition extra line spacing. As well as the letter width. So be sure to allways double check those two when u use any of this.
-----------------------------------------
PS: My apologies for the "too much" of a explanation above, lol.
Happy structing,
cheers
STF_Teknolog1k - Contemporary tech looking sans-serif typeface.
Once more a pretty thin design.
Brick filter @ 1x1
grid scale @ 0,85x0,85(to restore unwanted vertical spacing caused by nudging)
0.5 grid square unit weight.
Enjoy!
SUPER MA(RE-)O BROS.
A bitmap typeface family that recaps the classic fonts that were used for 1985 Nintendo Entertainment System game "Super Mario Bros."
-- It's a large piece that covers a bit of everything. And two seporate typefaces will be published the following days to accompany this one seemlessly.
both more less finished as well, but changes were made in this one that requires the other two to be fixed again in order to seemlessly work together before getting published, So stay tuned!
About this fist part:
It combines not just the two (title screen and ingame regular text)fonts used for this game, but also includes dingbats related to the game, and combines it all into one single typeface!
The sample will only display correctly at exact pixel size or double the value of this due to dither gradients that otherwise not show as a solid surfaces.
Basic and Extended Latin - letters seen at title screen
Superscripts and Subscripts - regular text font (only partial alphabet, as according to the unicode standard for this block)
Miscellaneous Symbols - miscellaneous dingbats related to the game such as emoji's and blocks to make seemless ornamental features like seen ingame
Halfwidth and Fullwidth Forms - regular text font but with full suport for both uppercase & lowercase, as well as numerals and basic punctuation.
Enjoy!
This Fontstruction is a joint venture between Dmitriy Sychiov and myself, Sed4tives.
A while ago I had the concept basic forms for this design pre-published in an effort to try and reach out to y'all, asking if any of you was interested in joining me in this attempt to create a multi member community collaboration.
The original idea had I invisioned at that time was; presumptuous that most writing systems have two parallel sets of letters that can be used to distinguish between upper- and lowercase. That hypothetically could than be divided in two separate "Half-A-Bets"(oopz, lol). One one for upper- and a second for lowercase. Allowing two Fontstructors to each choose their own designated section within that specific language. But enthusiasm quickly reached critical mass, making a mild gesture go ballistic and somehow sketched this crazy wild idea of having multiple participating parties that each reserved one-half of a language within one of the several designated ranges for the Basic Multilingual Planes (preferably within their native writing system if possible), and in turns to each have them supply the glyph set for their section.
Oh, and "Sweet mother of a blind gekko", boy what was I wrong, as eventually only one Die-Hard going by the name Dmitriy hooked up with the project in the end.
So hereby I proudly present the results of this combined forces:
"Gesamtkunstwerk" — A Futuristic sci-fi stencil sans
The philosophy behind the FontStruction was to publish the completed font with open font license (so that it is clonable). Feel free to redistribute/share, clone, learn or even refurbish mash-up and re-publish your version.
— [The original collaborative project is now closed for any new participating parties, sorry!]
Some small things still need additional work, such as kerning (which is incomplete and remains a WIP for now), Cyriillic script still missing uppercase set. All of this is scheduled to be included soon, so stay tuned..
hope y'all simply enjoy it so far nonetheless!
Cheers
This is a cloneMostly a filled version to DECODER but with some modifications, especially on the diagonals. This because the way they were designed in the outlined DECODER font made them look far too thick in a solid version. So on these I cut weight to get a better visual balance. I kerned some pairs but a lot still needs to be looked into, which I will soon!
Cheers
This is a clone of STF_DECODERA large set of custom brick composites aimed at small grid designs.
• 304 bricks inside
[INSIDE]
• Numerous corner bricks (curved & rectangular) in various weight ratios (even some transitional) most come with corresponding connector bricks as well
• A set of more decorative corner bricks, such as: inlined, multilined & knotted
• A collection of centered stroke sets in 4 weight ratios
• Some stroke intersection bricks
• A small set of serifs
All brick rotations come as seporate composite for easy further stacking
The idea for this was to encourage new Fontstruct users into looking past the editors limitations and work-arounds by way of demonstrating some hands-on examples and ideas. I hope this might inspire people to build upon these ideas and make their own sets of composites for their fonts.
The collection isn't a one stop shop for custom composites, but rather just a random useful set of bricks. To peek inside the stacked composite layout and find out how it was build enable "Expert Mode" inside the editor and press "o" on the keyboard, this switches the editor to "Outline" view mode.
Maybe I will include additional bricks to the set in the future, dunno yet, but perhaps.. If you like to request specific composite configurations, have ideas for future updates or simply having a question, just let me know in the comment section.
Thats it for now, the project is cloneable, feel free to copy, (re-)use, abuse, expand and /-or redistribute, Enjoy!
P.S. I'm also working on a similar FontStruction that covers slanted strokes and such for small grid designs. That one will be published soon as well.
Cheers
Modified clone that provides a style variation to the previously published Jurriaan Schrofer font revival I did, called "STF_SATER (Isometric)".
The earlier version I did was in fact amongst my very first font designs ever, and at this stage I still had about zero real typographic background knowledge.
Due to this I simply went out copying the exact lettering 1:1 as was seen in the source that I used. Not realizing that the angle of projection applied to the lettering in the original would render my font next to useless.
So I ended up with cool looking isometric letterforms that were heavily handicapped in a full font.
This time I overhauled the original and got rid of its isometric nature and simply just making it a regular, fully upright style.
Now with this addition it finally becomes a truly functional font at last.
I hope you like it !
This is a clone of STF_JS-SATER (ISOMETRIC)Another (large) set of brick composites.
There are most likely a number of duplicate bricks, not inside this collection itself, but when cross-referenced with todays earlier published collection there most likely are! Nonetheless I think they shouldn't be pulled from the project and should remain included in this collection as well.
All the bricks are saved in "MY BRICKS" pallet.
=============================================
The idea for this was to encourage new Fontstruct users into looking past the editors limitations and work-arounds by way of demonstrating some hands-on examples and ideas. I hope this might inspire people to build upon these ideas and make their own sets of composites for their fonts.
The collection isn't a one stop shop for custom composites, but rather just a random useful set of bricks. To peek inside the stacked composite layout and find out how it was build enable "Expert Mode" inside the editor and press "o" on the keyboard, this switches the editor to "Outline" view mode.
If you like to request specific composite configurations, have ideas for A future update or simply having a question, just let me know in the comment section.
Thats it for now, the project is cloneable, feel free to copy, (re-)use, abuse, expand and /-or redistribute, Enjoy!
Cheers
This is a clone