BATAVIER (Pro) — Geometric display sans
═══════════════════════════════════
[ MEMOIR ]
Revision / revival of the geometric lettering seen on a 1916 Dutch litho poster for the Wm H. Müller & Co.'sRotterdam-London passenger service called Batavier-Line(Batavier-Lijn in Dutch) which was originally designed by Bart van der Leck(1876 - 1958).
The Batavier Line existed from 1830-1960, and was the oldest steam shipping line in The Netherlands.
[ UPDATE INTEL ]
A couple of small changes were implemented compared to v/d Leck's original lettering. Most significant is the upscaled Ampersand, but numerous other small cosmetic or optimizing modifications were made as well.
I completed the full alphabet plus numerals and included additional symbols and punctuation marks to make it a fully functional typeface. The lettering is all caps (majescule) only. Some lowercase letter locations harbour a glyph alternate uppercase form as could be seen in the original litho poster source. Another bunch of alternate uppercase forms and underlined “superior” small capital letters were located in the “Halfwidth And Fullwidth Forms” Unicode block. In addition to that it has accented Latin letters for multilingual support. Also two resized alternate forms for the Ampersand and two stylish ligatures have been included.
[ SUMMARY ]
This is actually the second revision I did for the litho lettering by v/d Leck. The first attempt was made using a (faux-) Bézier approach, resulting in a huge grid canvas (168 grid units / bricks tall monstrosity). This made it a lot of hard work to build and for some letters impossible to properly implement kerning since FS values only allows min. -10 / max. 10 of grid units for kerning.
As part of the endeavor to refurbish some of my older FontStructions STF BATAVIER was one of those that was in serious need of some overhauling as well. The problem it presented was the font's cap-height. It was actually so tall and impractical to work and / or modify, that the first revival attempt never really fully materialized beyond a basic character set.
A full glyph only fitted on screen with the FS-editor zoomed-out max. and my browser zoomed-out at 30%. At this scale not only the canvas grid lines in FS's editor all but dissapeared, but it also resulted in a down-sized brick (or 1 square grid unit) with on-screen rendering at only 3×3 pixels, as oposed to 64×64 pixels with the FS-editor's default zoom settings.
So imagine selecting a tiny 3×3 px speck when working the glyph canvas at brick level to modify glyphs... pretty much impossible. Now, the other situation wasn't a whole lot better. This had the browser's zoom restored back to 100%, making the glyph canvas at brick level “workable” again. But in respect to the cap-height this only renders a very small section of the glyph on-screen. Requiring a huge deal of additional canvas navigation in FS's canvas editor, better known as “Pan the view (H)”, which is done with the hand tool.
And well, as many of you will know, this is an absolute bummer When navigating (or panning) a glyph bottom to top requires 3 full canvas swipes.
So yeah, the only way for an extended version ever to materialize was to be rebuild it from the ground up at a much small scale, using very different measurement ratios compatible with FontStruct's kerning.
[ TECH INTEL ]
This second revision attempt successfully reduced the font's cap-height down to a comfortable 5 bricks (or grid units) tall and Em-square of 7 bricks total. Some optical compensations were implemented to certain elements such as stroke weight corrections and careful minute differences in vertical positioning of letter mid-section elements.
For now thats all Folks..
Cheers
SEADWELLERS — 1920s Art-Deco Sans style
═══════════════════════════════════
I was somewhat inspired to do a Art-Deco style lettering of my own after seeing the stylish Art-Deco flavored FontStruction Aquamarine by IronClaws
Other than that the two fonts remain unrelated and Seadwellers poses no resemblance to Aquamarine. Instead I sort of did a 1920s Art-Deco style lettering with thin geometric letterforms. It's comes as a Majuscule only and the letters have nice quirky width variations, with some letters appearing almost extended, while others are more narrow.
— The similar aqua-themed concept is merely coincidental.
Only basic character set!
It remains a WIP for now..
Cheers
MOVIEMAX — Groovy bold & roundish 70s display sans
═══════════════════════════════════
Moviemax is a bold display sans-serif that has a groovy 70s offbeat look. Essentially an all-caps lettering concept with simple looking letters. The basic geometry and inversed contrast with its soft rounded finish create an immediate endearing effect.
The default characterset comes as all-caps (unicase) only, with no glyph alternative forms. It has been completed with additional symbols and punctuation marks.
To make thing a little more interresting I have also included a full (A-Z) alphabet set of small-caps letter modifications with drastically altered proportions. Complete removal of the inversed stressed contrast to make a more simplified and cleaner looking minimalist letter style. Their size was also reduced to 50% of the cap-height (scale ratio ≈ 1:2), providing an optional alternative for the missing lowercase forms in the font.
To finished off this extra set of small capital letters, another additional full (A-Z) alphabet set of large capital letters was included. These letters have also been scaled down a bit to better fit with the small capital letter set (scale ratio ≈ 6:8 or 75% of cap-height).
The 2 sets include a slight more unique and stylized level of sophisticated characteristics to the font, and when used combined together in a mixed-case text format creates nice text capitalization.
These alternative forms are located in the Halfwidth and Fullwidth Forms unicode block.
A set of basic punctuation marks that align with the small capital letters had also been included and could be found in the Halfwidth and Fullwidth Forms & Private Use Area 2 unicode blocks.
I hope y'all like it
Cheers
This is just a silly unicase font with alternates, made with simple squares and triangles (and some few other bricks)... But the colours captivated me. I hope you like the result. PS: You can also find an additional colour space (if you need it) in the "|" glyph.
This is a cloneMade with the well-known Grafilone typeface (by Bo Berndal) in mind, but more elongated and avoiding its curious roughness. In addition to the basic set of glyphs, some special ones have been added and the Cyrillic alphabet has also been included. The ligatures "ff" and "tt" are located on the characters "ff", "fi" and "fl". Enjoy it, please.
VOLLE BUISJES — Geometric sans-serif style
═══════════════════════════════════
[ INTRODUCTION ]
This font had derived and materialized from my previous FontStruction called Buisjes, and had innitially been planned to be made into this “solid”-style instance that would've then were to be combined and included to the original master font. That idea was later canceled when I decided not to make this part of the “Buisjes”-typeface.
I still went on completed it though, but I was now simply treating it as this unrelated new font instead.
The original “outlined”-variant still stood testimony in this second stage of development, as it served as the global basic backbone for this. But, since it now no longer was bound by accurate representation I could start utilize more dynamic sculpting techniques and make minute adjustments that incnclude some optical corrections, as well as implementing a slight more polished looking geometry.
[ TECHNICAL BACKGROUND ]
I took a clone from “Buisjes” and started modifing it into this new solid style. What I basically did was utilizing the “brick swap”-method in the FS-editor to replace every brick inside the font's “My Bricks”-palette. By doing so, essentially converting the font one-brick-at-a-time into this 1 : 1 conversion of its source without making any additional changes to the actual glyph-contours.
After a while due to some undesirable result that came from replacing the original bricks the design took a different turn when I started realizing that making an exact 1 : 1 conversion into this solid style wouldn't generate the most desirable looking font. This new solid version that was rendered from the “brick swap”-process seemed to have several optical complications, that when compared to the original outline version, had quite the different effect on its physical properties as well as the aesthetic quality of the letterforms, and had far less visual appeal. These newly presented optical misfortune also had a direct negative effect on the font's legibility. In oder to gain a better understanding as to why it took a toll on legibility some additional thing needs to be explained first, to make sense of it all later. This explains in short the visual effect of added contrast that comes from that “bi-linear”-characteristic nature of the outline version, which employs so much more emphasis to the font's overall geometric properties of various form, and therefor to the contour shape of a glyph. In return this has a direct impact on the overall effectiveness of these forms.
The reduction of this additional contrast within the font's “positive vs. negative”-whitespace balance for the solid version results in a letterform that has a rather weak representation of its several typographic components as well as for each of the individual letter-parts that form a whole, which also help to distinguish one letter from another. In simple words this means that a solid style lacks a lot of that emphasis that is present in the the original outline version, and makes for a far less pleasant and effective font.
Another issue I had with the 1 : 1 identical conversion was the unanticipated but pretty drastic deterioration of its initial “wow”-factor in the solid version that was generated. No longer beneficiary from additional added value that came with a more “decorative”-characteristic that is present within a outlined glyph contour. Also the “bi-linear”-nature of the outlined letters sort of gave the impression it was putting double the emphasis to the typographic parts and the geometric properties that make up each letterform. The rather squarish “box”-like characteristics of the lettering became much more evident in the solid glyph face. Shifting visual focus from the previously more ornate display attraction away towards this more “mechanical”-style that is this rather plain and somewhat shallow looking flat faced letter.
All of these were things that worked out just fine in the font's outlined version, but not so much in terms of a solid “filled”-like style.
Here are some of the things that cause trouble within an exact 1 : 1 conversion into solid bricks:
• Enclosed typographic elements render much thicker than what is considered “acceptable”
(requires optical correction)
• Diacritics render too thick and often too big
(requires a complete re-design)
• Radius of FontStruct's default solid circle arc connection brick is too small
‣ Making a solid font constructed from these to look compressed
‣ Arc intersection point not sitting deep enough
• Reduced emphasis in depth of geometric form
‣ Simple rather “feature-less” and “squarish”-looking geometry
(both requires numerous custom composite bricks in order to break-away from these constraints)
— The combination of the above in terms of the appropriate adjustments required to make optical corrections in order for it to have balanced proportions will have such significant impact to certain aspects of the physical presentation of the letterforms that they no longer share that seamless overlapping cohesion, and it couldn't really classify any longer as being this solid / filled style instance to the original master font.
That wasn't all (LOL) but yeah I'm done typing for now!
Hope you like it, more info follows..
Cheers
This is a clone of STF_BUISJESPHOTONIA (Pro) - 70s future retro style
═══════════════════════════════════
70s style reverse contrast sans with future retro aesthetics, perfect for projects with a vintage sci-fi, space age or computer theme.
This is actually a refurbished and extended version of an older FontStruction I did back in 2019. The original PHOTONIA was a cool looking little work, but didn't quite made the most of its design concept. Inexperience and poor design decisions had led to inconsistencies and other flaws throughout the font. Besides those it also had a small character set that mostly consisted out of the basic Latin block and bare essential symbols & punctuation marks. But imo it still had quite an interresting retro vibe and the potential to be more. So I decided to give the old project some well deserved refreshments.
First I started eliminating the inconsistencies that were present in the older work, than I continued polishing and re-design / modify several characters hoping to create a greater overall unity to the entire piece. Once I was fully satisfied with this renewed improvements it was time to build and expand the character set towards a more complete lingual and typographic support.
➜ ⚠ Previous Version:
▶ Basic Latin only
▶ Minimal kerning
➜ ⚠ What's New Inside:
▶ Additional Latin and accented Latin
▶ Diacritics
▶ Many glyph alternative forms
▶ Additional symbols and punctuation marks
▶ Horizontal box drawing (page deviders)
▶ Typographical symbols
▶ Ornamental printer's characters
▶ 1680 stored kerning pairs
Cheers
This is a cloneFRUNTSTOCT — FontStruct logotype reinterpretation
═══════════════════════════════════
For all ya failed attempts at re-creating the FontStruct logo typeface.
Many have tried their take on it, most without convincing succes, and often looking downright horrible.
Two of the most commonly made mistakes are.. 1) The introduction of a uppercase alphabet 2) Having a tendency for including far too many stuff in terms of extended language and typographic support, aiming for large multi-lingual character-sets with as many glyphs possible.
The lettering for the FS-logotype has this very distinctive modular geometric stencil concept. The underlying glyph structure consists of 5 horizontal rectangular segments, that together with a custom set of simple geometric blocks form a modular system that can be easily re-modeled or re-arranged to form the different letters and required parts that help to distinguish each individual letter from one another.
The modular system itself is highly simplified and easily accessible to implement additional changes. But typically speaking a simplified modular system comes at a price. And the further a system was simplified, the greater the amount of limitations will be. Which literally translates to a reduction in overall design depth and freedom to implement a more diverse complexity.
—TECHNICAL SPECS:
[Dimensions] Segments
X-Height — 3
Cap-Height — 4
Ascender — 1
Descender — 1
[Filters] Value
Horizontal Brick Size — 2
Vertical Brick Size — 1.8
Horizontal Grid Scale — 0.9
Vertical Grid Scale — 1
In case of this FS-logotype concept, there are a number of key components that put in place this very strict window of parameter-locked propperties, that exclude all but a few remaining options which could still be exploited, and therefor fully dictate whatever is, or is not possible.
Having only 5 segments, limited geometric components and highly restrictive rearrangeable capabilities towards implementing variation all adding up to the difficulty-level for extrapolating some of its more complex and- / or denser forms, symbols accents and puntuation marks.
To cramp excessive amounts of complexity into a very narrow band of realestate would have a certain negative wear on its aesthetic qualities. And is likely to result in a combination of messy glyph composites and queer-looking letter-inventions, contrapped in a mish-mash of irregular and gawky looking, at times even disfiguring geometry that sit at the heart of this problem.
This is exactly where those bad choices can either make or break your font. The modular system for FS's lettering clearly isn't the most suitable of fonts for uppercase forms and complex geometry.
This doesn't mean that it is impossible, as was demonstrated by a small number of re-interpretations that actually do include fairly decent uppercase inventions. One of such that have successfully pulled off the inclusion of a uppercase set for his rework of the logo typeface was Zhalgas Kassymkulov—previously known as architaraz.
His attempt is a beautiful display of craftmanship and clever simplicity.
Here is a list of attempts that I think are successful re-interpretations of the original FontStruct logo:
Structurosa Italic — by four
AT Archistruct Outline — by kassymkulov
Structurosa— by pauldhunt
FS Logotype — by WeDoFonts
pixelstructia — by gamesgames
fs Colophon — by user-juli
fs sanstruct — by ETHproductions
Realised — by thezenmaster1000
Structurosa Bold — by pauldhunt
FontStrukt 2 Soft — by Jamie Place (FontBlast)
Structurosa Bold Too — by pauldhunt
— WHUTZINSIDE THIS FRUNTSTOCTION?
Now, a extensive explanation for the decision to not include uppercase forms to the font, as well as for the constraint on total character amount had been broadly covered above. I think that small caps numeral figures make a much more sleek looking glyph, and tying the overall character set much more together as a whole.
Another, and I say, rather more unique feature found in my version of the lettering is only a subtle one in fact. One that mostly works invisibly, that without the awareness of the reader, is easily missed. And can only truly visually materialize and appreciated seen up close. This is the implementation of several slight deviations and custom sculpting of certain curvatures and round features. Introducing an ever so slightly more diverse dynamic, but also taps deeper into some of that shape contrast propperties.
In addition to that I've also included several glyph alternative forms and small number of ligatures to play around with.
among these glyph alternates there is also this continuous string of 13 rather experimental looking glyph variations for the lowercase letter 's'.
These aren't actually meant to be usable characters, but instead is a collage of different configurations that make various curved geometry, and are simply stored in a glyph-style fashion that provides an actual physical estimation on their appearence and for me to test their functional values in a text format.
So far so good,
I am happy with how the font turned out to be, it is fairly consistent looking and still remains quite usable as a font.
That's all for now folks...
Cheers.
Unicase font with a lot of alternates in the lowercase to improve the general playfullness. Also added more diacritics and accents, and remodeled and kerned the old glyphs. (Plus: other "1" at the "t", the 3rd "U" -and their accents- are at the "v", "ò", "ó", "ô" and "ö", respectively.)
This is a clone of zimonart eYe/FSJS-PTT 1975 (INLINE) ― Geometric modular typeface system
═══════════════════════════════════
Another font addition to the ever evolving and growing collection of revivals and inspired works called LETTERS OP MAAT, a project celebrating and trying to recreate the typographic contributions originally designed by Dutch graphic designer Jurriaan Schrofer. This time I did sort of a revision / recap based on Schrofer's 1975 trichromatic sketches he did for the PTT (TD) the technical department of the Dutch State Company of Post, Telegraphy and Telephony (PTT) that featured a style variation to one of his alphabet systems.
JS-PTT 1975 is a typeface family of three font styles called (SOLID), (INLINE)and (OUTLINE), that seemlessly overlap for combined multi-layer capabilities. Allowing easy multicolor replication similar to the original sketches and more, but also to provide three different isolated forms for individual use as separate fonts.
Now, without diving too deep into the man's biographic profile I do want to point out the following; ―Despite the unprecedented amount his typographic brilliance has contributed, he remains relatively unknown, but certainly no stranger among real typ-o-philes. Schrofer was light years ahead of its time. The level of crafmenship he put into his work was often overshadowed by his mind-blowing experimental, at times even bizarre and psychedelic typographic approach on letterforms, and can easily make one not truly realize the amount of expertise and skill often on display. Therefor he probably remains best known for his extravagant endeavours in book design.
Between 1973-1979 Schrofer worked on a assignement for the Dutch client called PTT (TD) this was during his time with Total Design. For the PTT (TD) Schrofer worked on a big multi project assignement he himself cataloged "Bewegwijzering Girokantoren". This essentially was the design of multiple visual identities for floorplans of 3 office buildings owned by the company. The project gave birth to several new style variation for several of his alphabet systems, one of those was this variation that introduced the rounded corners to some of the letterforms.
This particular recap was based on a alphabet system seen in numerous of sketches Schrofer designed in 1975 for the Dutch ministry of welfare, public health and culture (WVC) department for aesthetic design with the PTT. Part of the technical service at the PTT, responsible for the visual logistics of the company. The PTT, at the time a state-owned multi-utility company providing countless services. All the letters originally provided in Schrofer's sketches are included, I designed all the missing letters plus a couple of alernatives following the original's design parameters. In addition to that I designed and included numerals and some symbols and punctuation marks as well.
During my studies of Schrofer's work I noticed that various alphabet systems reappeared in many of his works. Further research showed that throughout his carreer he seemed to have developed and pre-fabricated multiple alphabet systems, variations and concepts that he constantly reused, refurbished, and recycled over the course of his carreer. Therefor it can be difficult to pin point the exact origins for some of his lettering concepts. Which is something I learned along the way and did not really anticipated for when I innitially started this LETTERS OP MAAT project, so some of my ealier fonts for this project haven't exactly all been properly researched.
For example the lettering concept seen in one of his designs for the PTT (TD) had already appeared two years prior of this PTT materials, when it was used in the 1973 brochure called Grafiek Per Postbode for Galerie 33. This brochure shows the same alphabet system that he later reuses for one of the PTT office builing floorplan designs. The brochure features an outlined variation of that same alphabet system for the text Heading, and a rounded mono-linear variation to this same alphabet system for the Subheading. This mono-linear variation itself had been used in the work for The Beurs van Berlage (Foundation) as well [IMAGE], the Beurs Van Berlage is a Dutch commodity market building located in the centre of Amsterdam. The alphabet system later then got digitalized for implimentation in the Dutch passport, and was acompanied by several additional derivative styles to this mono-linear version of (you can probably guess it) that same alphabet system, including a 5x7 Dot Matrix. Schrofer's design concept for the Dutch passport eventually never got used. And there were several other reapearances of the alphabet with several clients throughout his carreer.
I know it once again is a lot of info to digest, but I want to portray a proper image of the whole story that involves this project as well as it's font contribtions, so I can't help myself here, lol. But I'm pretty certain there are people out there that can appreciate this informative background, so I hope y'all didn't mind it too much.
The full font family could be found here: STF_PTT 1975
Interrested in more of my Jurriaan Schrofer inspired? Please take a look a my complete collection of Fontstructions tagged with STF-LETTERS OP MAATfor the full catalog of fonts I contributed to this project so far.
Cheers
VAN NELLE (Blueprint) — Geometric modernist sans
═══════════════════════════════════
☛ THE SOURCE
A re-interpretation of the 1926 geometric sans serif alphabet system reproduction by Jacob Jongert, published in a 1930 sourcebook by N.J. van de Vecht. The geometric uppercase set of the alphabet system is what would later become the famous sans serif capitals which he used for lettering throughout many of his Van Nelle materials.
☛ THE FONTSTRUCTION
Attempt at making a convincing recap of the original alphabet by Jacob Jongert as it was shown in the 1930s sourcebook, and extrapolate that into a full functional font. The decision to go with a small grid sparked a number of limitations in terms of the design freedom that forced some inevitable changes. But the general idea sort of became not to make it a revival, but rather more or less a faithful revision. One that would still be instantly recognizable yet didn't necessarily had to be all about accuracy.
☛ —The small grid design made sure this wasn't happening anyway!
But, for instance, the most striking difference between the two fonts (their weight) in fact is such a byproduct for one of those limitations. Something FS's small grid couldn't properly reproduce, so VAN NELLE (Blueprint) has a slight stronger weight, making the font somewhat of a bold style version of the original. This in addition provided me with slight extra freedom to inplement a little personal touch for further manicure of the font's finer details. Which allowed me to cope with some of the optical clunkiness that come with a fatter face and the grid based design.
Besides these circumstantial differences, which were basically beyond my control, I've also made some intentional changes to make the typeface more practical to use. The changes include things like the significantly lowered ascender height, the slight different width for certain letters, larger tittle (dot above i, j & ij), and several more. despite these changes I believe it very much still reflects what Jongerts once invisioned for the system.
☛ SOME NOTES ON THE ORIGINAL AND ITS CREATOR
Jacob Jongert(1883-1942) was a advertising designer from the Netherlands. After varied studies, including being Roland Holst’s assistant and an acquaintance and colleague of S. H. de Roos [who brought the Arts & Crafts ideas of William Morris to the Netherlands and devoted his career to book design and typography] with whom Jongert experimented with several printing techniques and discovered graphic design as his ideal art form.
¶ In 1923 Jongert rolled in a unique and long-term collaboration with the Van Nelle company, where he became head designer, a position he held until 1940. The Van Nelle company had an extremely modern approach towards advertising (they even commissioned Cassandre to do a poster) and Jongert created for the firm a recognizable image with clear shapes, powerful letters and primary colours, totally Dutch avant-garde in style, and with a strict and rigorous approach directly linked to De Stijl principles. The corporate identity he created has become a milestone in the design world.
¶ The lettering, however, is the driving force that ties it all together. The style is a straightforward set of plain, mono-linear, sans serif capitals in a style that just started to come into fashion in the late 1920s, early 1930s with the rise of functionalism and geometric type design. Yet, while these ideas were already thrown out there, its clever simplicity plus the systematic and cohesive way Jongert implemented his lettering was unusual at the time. The square and minimal construction of the forms allowed the letters to contract and expand to fit any situation, yet maintain a consistent and recognizable appearance throughout the Van Nelle line. ¶ Something we only recently have learned to appreciate is to see his hand crafted system amid the current advancements in variable-font technology, which offers a similar kind of flexibility to typeface designs. A quality that certainly placed him well ahead of its time.
What I particulary like about Jongert's original is the stuff that is going on in the lowercase set of the alphabet, which are those quirky lowercase letter inventions that are different from the more traditional modernist sans, but sadly the lowercase letters were pretty much never used in his works.
I created a simple PDF typeface specimen for those who want to see the high-resolution preview.
PDF SPECIMEN WAS DELETED
Thats all Folks ☚
☛ Cheers
FAKOS VARYTITAS - Futuristic Sci-Fi stencil design
═════════════════════════
A Stencil letter with a rather unorthodox form.
The main concept is that of the Sci-Fi / Tech aesthetic. But the asymmetrics in its geometry, various custom build curves and incisions somewhat tune down the mechanical geometric tone of the letterforms, and introducing a slight more humanized touch to its rhythm. These non-traditional attributes making this more of a novel stencil typeface with a strong personality.
The typeface was inspired by space age tech. Its a display style font that is perfect for when your project has to have that typical techy or futuristic aesthetic look. Its best used at large size, but it does work in smaller size format as well.
The font includes:
• uppercase, lowercase & numerals
• accented latin
•diactritics
• symbols & punctuation marks
• ligatures
• some glyph alternatives
• ornamental decorative elements
All "lingual" characters are functional stencils, the only exceptions that aren't stenciled are the ornamental decorative symbols and dingbats.
Cheers
This is a cloneARS NOUVEAUX - Art Nouveau inspired display typeface
═══════════════════════════════════
A personal digital reimagination of the lettering style by "Charles Rennie Mackintosh" (1868-1928), a pioneer of the "Glasgow School of Art" and so called "Arts & Crafts" movement.
His distinctive style of lettering has been seen many revisions, revivals, reimaginations and inspired designs alike over the years, and has evolved into a broad collection of available fonts.
This basic stylistic lettering concept from Mackintosh sort-of losely funcioned as the structural guiding principle for the creation of "Ars-Nouveaux".
This FontStruction is an experimentation into creating similar flavored, but still unique letterforms within that same design framework.
First I started to layout the overall basic asymmetrical core geometry from a set of custom rectangles, half arc's and slants for each of the letters bare skeleton shape. Once I completed the full set of 36 glyphs [a/z, 0/9] These basic shaped were then further modified into more sophisticated finalized letterforms.
Caps-only, but with many alternates, accompanied by a set of ornate initials.
Hope you like it,
Cheers
This is a cloneOpening day of Marvel's Spiderman: Across the Spiderverse!
Timing has been off as of late, with FontStruct error messages of the server being down, but only for this particular font. Other software has also been uncooperative. But there is a universe where everything went fine and there were no problems, but this isn't that one. Weird things also happened with saving the font, where after saving, it just decided to do a global brick swap. Posting it with glitches and all, and I'll fix it later just because. And I swear I hit the Publish button, but hours later, it still said it was private. Let me try again...
This is a cloneDOBINI BALWAUM (Inline) — Didone-style 18th century modern serif
═══════════════════════════════════
Dobini Balwaum is a Didone, or modern, serif typefaces inspired by the works of Bodoni, Didot and Walbaum.
This font had been in the making for quite a long time as I ren into several design difficulties along the way. Most challenging parameter was the inline width. By default the width for the inline was set at 0.125 (or 1/8th) grid units.
Maintaining a constant width for the inline proved to be next to impossible. Therefor it evolves around a 'close' approximation of 0.125 units instead. Stroke weight for the letterform contours also proved to be somewhat of a constraining factor for the overall design concept. As it limits the ability to build complex geometry.
Due to the complexity in brick arrangements the font remains having some minor imperfections that I wasn't able to polish out so fat yet, and some may never will..
For now only Basic Latin letters, it remains a WIP
I hope you like it so far,
Cheers
Opening day of Guardians of the Galaxy Vol. 3!
Celebrating with a spacy star filled background texture, bombarded by comets infiltrating multiple dimensional planes of existence. "Guardare" is Italian for Guardian.