DOBINI BALWAUM (Inline) — Didone-style 18th century modern serif
═══════════════════════════════════
Dobini Balwaum is a Didone, or modern, serif typefaces inspired by the works of Bodoni, Didot and Walbaum.
This font had been in the making for quite a long time as I ren into several design difficulties along the way. Most challenging parameter was the inline width. By default the width for the inline was set at 0.125 (or 1/8th) grid units.
Maintaining a constant width for the inline proved to be next to impossible. Therefor it evolves around a 'close' approximation of 0.125 units instead. Stroke weight for the letterform contours also proved to be somewhat of a constraining factor for the overall design concept. As it limits the ability to build complex geometry.
Due to the complexity in brick arrangements the font remains having some minor imperfections that I wasn't able to polish out so fat yet, and some may never will..
For now only Basic Latin letters, it remains a WIP
I hope you like it so far,
Cheers
BOOTSHAUS — Geometric "Bauhaus"-inspired modernist sans
═══════════════════════════════════
Bootshaus is another endeavour into the Bauhaus realm of typography.
Focus for this font lies mainly within it's broad choice of glyph alternate forms to select from for stylish texts or logos.
Much of the extra glyph alternative forms are loosely based on the lettering by Sascha Lobe for the Bauhaus-Archiv
Many more glyph alternative forms are planned to be included, stay tuned..
— WIP
Cheers!
VOLLE BUISJES — Geometric sans-serif style
═══════════════════════════════════
[ INTRODUCTION ]
This font had derived and materialized from my previous FontStruction called Buisjes, and had innitially been planned to be made into this “solid”-style instance that would've then were to be combined and included to the original master font. That idea was later canceled when I decided not to make this part of the “Buisjes”-typeface.
I still went on completed it though, but I was now simply treating it as this unrelated new font instead.
The original “outlined”-variant still stood testimony in this second stage of development, as it served as the global basic backbone for this. But, since it now no longer was bound by accurate representation I could start utilize more dynamic sculpting techniques and make minute adjustments that incnclude some optical corrections, as well as implementing a slight more polished looking geometry.
[ TECHNICAL BACKGROUND ]
I took a clone from “Buisjes” and started modifing it into this new solid style. What I basically did was utilizing the “brick swap”-method in the FS-editor to replace every brick inside the font's “My Bricks”-palette. By doing so, essentially converting the font one-brick-at-a-time into this 1 : 1 conversion of its source without making any additional changes to the actual glyph-contours.
After a while due to some undesirable result that came from replacing the original bricks the design took a different turn when I started realizing that making an exact 1 : 1 conversion into this solid style wouldn't generate the most desirable looking font. This new solid version that was rendered from the “brick swap”-process seemed to have several optical complications, that when compared to the original outline version, had quite the different effect on its physical properties as well as the aesthetic quality of the letterforms, and had far less visual appeal. These newly presented optical misfortune also had a direct negative effect on the font's legibility. In oder to gain a better understanding as to why it took a toll on legibility some additional thing needs to be explained first, to make sense of it all later. This explains in short the visual effect of added contrast that comes from that “bi-linear”-characteristic nature of the outline version, which employs so much more emphasis to the font's overall geometric properties of various form, and therefor to the contour shape of a glyph. In return this has a direct impact on the overall effectiveness of these forms.
The reduction of this additional contrast within the font's “positive vs. negative”-whitespace balance for the solid version results in a letterform that has a rather weak representation of its several typographic components as well as for each of the individual letter-parts that form a whole, which also help to distinguish one letter from another. In simple words this means that a solid style lacks a lot of that emphasis that is present in the the original outline version, and makes for a far less pleasant and effective font.
Another issue I had with the 1 : 1 identical conversion was the unanticipated but pretty drastic deterioration of its initial “wow”-factor in the solid version that was generated. No longer beneficiary from additional added value that came with a more “decorative”-characteristic that is present within a outlined glyph contour. Also the “bi-linear”-nature of the outlined letters sort of gave the impression it was putting double the emphasis to the typographic parts and the geometric properties that make up each letterform. The rather squarish “box”-like characteristics of the lettering became much more evident in the solid glyph face. Shifting visual focus from the previously more ornate display attraction away towards this more “mechanical”-style that is this rather plain and somewhat shallow looking flat faced letter.
All of these were things that worked out just fine in the font's outlined version, but not so much in terms of a solid “filled”-like style.
Here are some of the things that cause trouble within an exact 1 : 1 conversion into solid bricks:
• Enclosed typographic elements render much thicker than what is considered “acceptable”
(requires optical correction)
• Diacritics render too thick and often too big
(requires a complete re-design)
• Radius of FontStruct's default solid circle arc connection brick is too small
‣ Making a solid font constructed from these to look compressed
‣ Arc intersection point not sitting deep enough
• Reduced emphasis in depth of geometric form
‣ Simple rather “feature-less” and “squarish”-looking geometry
(both requires numerous custom composite bricks in order to break-away from these constraints)
— The combination of the above in terms of the appropriate adjustments required to make optical corrections in order for it to have balanced proportions will have such significant impact to certain aspects of the physical presentation of the letterforms that they no longer share that seamless overlapping cohesion, and it couldn't really classify any longer as being this solid / filled style instance to the original master font.
That wasn't all (LOL) but yeah I'm done typing for now!
Hope you like it, more info follows..
Cheers
This is a clone of STF_BUISJESSTF_FRONTAL BOSSING - A groovy bold and rounded Sans Serif typeface.
═══════════════════════════════════
This is going to be my second entry in the "HeavyComp"
═══════════════════════════════════
ABOUT THIS FONTSTRUCTION:
TECHNICAL:
Grid: 17 × 16 square grid units (incl. descends, overshoots, accents)
Filter: 2 × 2 brick size
BIO:
The idea was to come up with a friendly chubby fella.
And for all I know I think I have done just that. In the end, it does seem to appear it came out with a slightly bigger forehead than the average (but, no love was lost here, we have come to learn to appreciate the misfits).
Despite its weight and slightly clumsy appearance this juicy Mr. Boogie still got dat funk, and can not wait for it to be the next saturday night.
Even so, when he for once isn't told to "Swing and Boogie" he still is nice to have hanging around. His friendly persona is only to be matched by the ever so nice soft curves. "No sharp edges to detect here".
I can only hope for that all of you come to appreciate him as well! ;-)
(Let's do this in another language as well)
CONCEPT:
The idea was to make a letterform that has a friendly looking design. I tried to achieve this by way of softening all hard convex corners with a smooth rounded curve. And by "all" I litteraly meant, even on all diagonals, accents, thin strokes and stroke tips (Nothing was left untouched).
For all the concave corners, so the negative space (white space) of the letters have multiple solutions depending on what is happening (does it curve, intersect and or wether a stroke continues or not)
The curves all have near hi-res looking (a couple of minute imperfections) but otherwise smooth surfaces, and there are multiple custom created ratios/transitions, such as:
1.5×1.5, 2.5×2.5, 2.5×3, 3×4 (+ The bullet is a 7×7 circular dot)
I hope you like it,
Cheers
(PS: Sample follows soon)
LORD KRUMBLE —A transitional sans that mixed Art-Deco with neo-classical humanist minuscules
════════════════════════════════════
Inspired to celebrate the homecoming of him who strikes fear in all badly baked treats, the one which nightmares are made of, that kind of person that makes every cookie crumble and wanna skip school for a day or two. Of course I'm talking about the one and only "Cookielord".
— "What could'nt be better suiting than to have a freshly crasfted and new font that is celebrating his return."
Him recently dropping a new FontStruction somewhat came as a pretty unexpected but nice surprise. It just so happened to be that I was already looking for new ideas that could lead to the next project. In fact, until recently I was actually still struggling with this, and hadn't really been able to provide a catchy and motivating design theme to bring to the table that would once again help me on my way with starting a new FontStruct project. So I took this occasion to see if I was able to find a little inspiration in his Verminfont. Not particularly aimed at doing a derivative work, nor anything closely resembling his cool font. Instead rather trying to draw some inspiration from that peculiar and playful but friendly characteristic, that to me personally distinguishes his Vermin font the most anyway.
╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍
And so I appoligize for the fact that this doens't truly relates or do justice stylistically in any way to the aesthetic present in Cookielord's original Vermin font. That being said, this is what became the end product of that.
But, it does have one striking resemblance that pays a homage to him, and that is the included cookie. Sorry I took a bite out of it my friend, hope you can still appreciate it.
— Just to let you know that regardless wether you decide to stay or not, your recent return isn't going to be for nothing!!
╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍
No 'Brick Size' filters were used, which of course presented me with a lot of challenges that limited the amount of complexity I was able to put in, something that wouldn't been the case with (2:2) 'Brick Size' filter settings. The other noteworthy aspect to this particular fontstruct is its grid size, which is tiny. Never before have I made a Fontstruction that required kerning values to fluctuate only as little as 0,01. This also made it impossible to implement optical corrections on the vertical axis in the form of overshoots, but luckily this didn't became a very clear issue in the end.
I'm not sure if I can complete the additional Latin accents for all characters due to the limited grid space available surrounding some of glyphs. I might try doing those later.
Let me know what u think of it so far fella's, stay tuned!
Cheers
GROOVERIDER — 70's future retro display sans
═══════════════════════════════════
Grooverider is another groovy looking display style with that distinctive 70's retro aesthetics.
The concept for the lettering is that of a solid future retro / space-age style with inversed-stress. It's reversed weight contrast adds some additional groovin' funkyness and good old boogie wonder flavour to the font's overall characteristics. Making it somewhat of a hybrid mixture between two distinct 70's and 80's retro styles.
Simple at the surface, but rather complex down at the Editor level, since the letterforms have several tailor-made geometry and curve shapes. Pulling off some glyphs without disrupting the (near) real Bézier curve geometry was tricky I must say. Like for example the joined letters such as lowercase Æ/Œ, question mark, @ sign, number 2 digit, percent sign and lowecase letter S all proved difficult. But also some unlikely ones that are typically pretty straight forward now were trickier within the font's parameters. But I'm pretty satisfied with the end result so far. Little to no compromising imperfections slipped into the design, one or two real minor ones are present, but only truly become noticeable once the size is fully blown up.
It was very fun to make though, I hope y'all like it...
Cheers
This is a cloneMODERN TYPEWRITER - Typewriter style Slab-Serif
============================================
The idea was do a simple, clean and solid looking design that mimics the looks of a classic typewriter style typeface used for form fill writing style.
The rectangular shaped concept was carefully chosen to provide this nice mechanical looking forms, and to further enhance the technical style concept of this design.
RINKEL — Bold constructivist display design
════════════════════════════════════
This was very much influenced by the rare sighting of
1974's Lettergraphics International typeface by the name 'Belden'
Belden was shown in a Lettergraphics ad in U&lc vol. 1, no. 3 from 1974, without further design credits. It was also featured in the book cover design for "Metaphysics: An Introduction" by Keith Campbell.
—Which in terms I have used for my personal extrapolation of the complete character set of this FontStruction.
────────────────────────────────────
Not a digitizing revival of the original piece, but rather a very strongly inspired personal take on it.
—More complete character set is coming soon..
Let me know what u fellow structivists think of it so far!
Cheers
ZEPHTON (Pro) — 70's future retro / sci-fi style typeface
═══════════════════════════════════
[ INTRODUCTION ]
A revival of the Sci-Fi lettering used by the “Atlantic Toy Company” for their “Galaxy Serie”. A science fiction themed toy line that was manifactured from 1978 to the early 1980s.
The lettering seen on their packeging uses a modified and filled version of a typeface called Paperclip Contour, which was designed by Dutch graphic designer Ad Werner, and was issued by Mecanorma in 1973. There is very little information provided on the web in regard to the original typeface by Werner. And even fewer images. Nothing that show a complete character set, only FontInUse submissions. But taken from the research I conducted I can safely conclude that the original Paperclip Contour typeface has just one style, which is outlined, and that it includes a lower case(a-z) letterset with numerals and just a had full of symbols and punctuation.
That being said, this actually is the second revision I did for the lettering. The innitial first version had a super basic character set, as well as a couple of mistakes included alongside some compromises in respect to certain glyphs. This was due to the limited knowledge I had in regard to the use of the FS-editor at that time. So the font wasn't 100% accurate. This newer version correct most of the inconsistencies that were present in the older version.
Due to the incomplete resource material on the original Paperclip Contour by Werner I can't check accuracy of this newer version. But I think that apart from the thicker weight in Zephton its 99% accurate.
Where the older version ran short by a lot, this new revision in fact can qualify as a full font, with everything from numerals, symbols, puntuation marks as well as accented letters for more Latin languages. And ever some glyph alternatives. Making this much more of a functional font.
[ THE FONTSTRUCTION ]
The font is a “Unicase” style typeface that has only “Minuscules” included. There are glyph alternate forms for several letters as well as a secondary set of numeral figures. These characters are located in the Unicode blocks for “Halfwidth And Fullwidth Forms” and “Private Use Area 1”
There is also a full (a-z, 0-9) alphanumeric set with “Contour Outlined” glyph alternative forms, which is located in the “Private Use Area 2”
The font saw a major update that tied everything together, and sort of finalizes the font for proper use.
Several characters have received minor adjustments in order to find a balanced harmonic distribution of typeset material. Also several improvements have been made to the overall shape and form of various characters. In addition to that numerous new characters been designed, expanding the character set even further.
Work also continued in the metric department, building the kerning table, that contains 2368 stored kerning pairs so far. Spacing was reduced by 50% to tighten the letter fit significantly. To round things up and convert it into a more functional typeface some of the characters were rearranged and/or relocated to different Unicode blocks.
═══════════════════════════════════
[ CONTOUR OUTLINED GLYPH ALTERNATIVE FORMS ]
The contour outline glyph alternative forms are not 100% accurate conversions of their solid counterparts. This due to minor design difficulties that simply made it impossible to fully execute it at its current size and with this thin stroke weight. The deformities are simply the result of a lack in fully smoothened stroke contours in some of the transitions from diagonal to curved parts. These flaws are minute, and mostly only noticable at large size rendering, but nonetheless present. In small to medium size text these imperfections are hardly visible, and pose no real problem. Anyway.. the contour outlined glyphs are still very close approximations nonetheless, just so that it happens to be with a small number of tiny imperfections.
As a direct result of this the two sets with glyphs do not fully match and therefor not seemlessly overlap.
This can be ignored for most part in the majority of the font's application, but it does create two important limitations:
1) Contour outlined glyphs are unsuitable for vector path outline rendering when the stroke alignment is set to "Outside" (Configured like that with threshold for the corner point angle set to sharp these imperfections in the glyph contours can generate spikey disruptions to appear in the stroke rendering).
— So this configuration should be avoided.
2) The two styles are unsuitable (or incompatible) with stacked “multi-layer" overlay text compositions.
— Simply due to the fact the two variations aren't a 100% true match.
They do on the other hand, combine perfectly side-by-side in text composition.
═══════════════════════════════════
[ MORE LIKE THIS ]
There is also this other FontStruction that was inspired by Ad Werner's font Paperclip Contour, called Neue Werner Paperclip, this one was crafted by fellow memberfunk_king
Thats it for now...
Cheers
This is a cloneINNERCITY — Geometric future retro display grotesque
════════════════════════════════════
Geometric unicase display sans with a stylistic filled counter-like (Uc) set and monolinear 'bare-boned' geometric grotesque (Lc) set.
— Full alphanumeric dual-variant font !!
════════════════════════════════════
Elmoyenique's "zenzura" (a very stylish work in it's own right, make sure to check that one as well) anyway,
His 'zenzura' font kind of struck me with a healthy fresh dose of motivation. In the past I've explored somewhat similar style designs, but none of those ever really got consolidated into the extensive and complete work Elmo delivered with his stunning zenzura.
So I decided to dig up one of my older such projects and see if this new motivational boost could turn 'half'-a-font into a complete piece.
Long story short, this update is the result of that venture.
════════════════════════════════════
Where previously this project came in just one style (filled counters), with no additional glyph alternates. Basically a complete absense of the lowercase-string all together, and only very limited complementary set of symbols and punctuation marks were present. Neither did the previous version had a great deal of refinement in terms of metrics / kerning and overall horizontal distribution of type-set material. So, it was nothing more than a plain doodle of the idea I had back then, that had to be preserved for a later stage.
But being drawn into more recent projects at the time I eventually ren dry on motivation to fully finalize this I ended up publishing it in its rough state.
════════════════════════════════════
ABOUT THE UPDATE:
The'bare-boned' lowercase is a somewhat futuristic geometric looking form, whereas the filled uppercase set has a strong retro vibe.
Combined in 'mixed-case' it can make a cool optional decorative style capitalization for your text. Used in isolation the two styles (Uc, Lc) both could be used as two seporate fonts, allowing stylistic text hierarchy.
In addition to the stylish retro-like, and partially filled forms I included a glyph-alternative set that strips the letterforms down to their monolinear core-geometric essence.
The design of this set is characterized by the spacious, sharp and clear appearance, that looks slightly futuristic but fashionable still.
With this new addition being the more legible and clean form of the two style sets, I placed this variation into the lowercase-string, making this the default-style for the font.
For the numerals, symbols and punctuations, I tried to remain committed to the stylish filled nature of the uppercase set.
A full alternative monolinear and 'bare-boned' numeral counterpart is located in the 'Full Width' Unicode block. Two extra weight variations for the brackets are also included for a more precise personal preference..
— And so it finally could respectably considered being a full font after all.
Thats all folks.. Enjoy !
cheers
This is a cloneSTF_NEUE ISAIAH - 70's Art Deco / Streamline style typeface
══════════════════════════════════
Most of the design credits for this font should go toIsaiah Garciasince I took the liberty of revisiting her fontstructionFS Idea
Please check out this member's awesome contributions here:Ivy Meadows (Isaiah Garcia)
══════════════════════════════════
[THE PROCESS]
The one major difference between the two works is the grid size and construction method, Isaiah's version was made using a faux-Bézier approach (very labour intensive) and requires a fairly large design grid, whereas my version is a small grid design, utilizing the circle arc bricks and composites to achieve smoother contour quality, and was done on just a 4x7 grid using 2:2 filter.
This different approach and limitations in small grid designs have led to a number of small changes for certain glyphs. Also have I change some details slightly to my personal preference. But it remains very much Isaiah's design.
══════════════════════════════════
[THE FONT]
I tried to remain as faithful to the original font as possible, and in addition tried to further expand the character set. Most important differences made in my revision are the additional lowercase chatacter set (spurred strokes), the uppercase alternative forms / lowercase alternative forms (spurless) and extra symbols.
Enjoy!
This is a cloneLEOPOLD PRO (Serif-Regular) — Modern geometric condensed slab-serif
════════════════════════════════════
This font is the second style instance for the newly launched "Leopold Pro" typeface family, and is kicking off this new family of fonts.
The first one came as a minimalist, geometric sans serif style, this second font adds a serif style variation to the family. Both the "sans-regular" and "serif-regular" styles have identical visual properties for size and weight to allow seamless combination of the two, and as the name already suggests, represent the "Regular" style for the family.
Motivation for this was to craft a slab-serif style for the original geometric letterforms that has strong antique mechanistic qualities to add somewhat of a typewriter characteristic.
The relaxed optical proportion, short unbracketed serifs and open spacing results in clean and pleasant to look at text. Largely thanks to these properties it is still relatively legible in terms of a slab-serif style.
The other style can be found here:
LEOPOLD PRO (Sans-Regular)
Two additional extra "Light" and "Bold" weight classess are also currently in development, both remain works in progress for now, but are expected to be included in the future.
I hope y'all like it so far,
Cheers
This is a clone of STF_LEOPOLD Pro (Sans-Regular)VAN NELLE (Blueprint) — Geometric modernist sans
═══════════════════════════════════
☛ THE SOURCE
A re-interpretation of the 1926 geometric sans serif alphabet system reproduction by Jacob Jongert, published in a 1930 sourcebook by N.J. van de Vecht. The geometric uppercase set of the alphabet system is what would later become the famous sans serif capitals which he used for lettering throughout many of his Van Nelle materials.
☛ THE FONTSTRUCTION
Attempt at making a convincing recap of the original alphabet by Jacob Jongert as it was shown in the 1930s sourcebook, and extrapolate that into a full functional font. The decision to go with a small grid sparked a number of limitations in terms of the design freedom that forced some inevitable changes. But the general idea sort of became not to make it a revival, but rather more or less a faithful revision. One that would still be instantly recognizable yet didn't necessarily had to be all about accuracy.
☛ —The small grid design made sure this wasn't happening anyway!
But, for instance, the most striking difference between the two fonts (their weight) in fact is such a byproduct for one of those limitations. Something FS's small grid couldn't properly reproduce, so VAN NELLE (Blueprint) has a slight stronger weight, making the font somewhat of a bold style version of the original. This in addition provided me with slight extra freedom to inplement a little personal touch for further manicure of the font's finer details. Which allowed me to cope with some of the optical clunkiness that come with a fatter face and the grid based design.
Besides these circumstantial differences, which were basically beyond my control, I've also made some intentional changes to make the typeface more practical to use. The changes include things like the significantly lowered ascender height, the slight different width for certain letters, larger tittle (dot above i, j & ij), and several more. despite these changes I believe it very much still reflects what Jongerts once invisioned for the system.
☛ SOME NOTES ON THE ORIGINAL AND ITS CREATOR
Jacob Jongert(1883-1942) was a advertising designer from the Netherlands. After varied studies, including being Roland Holst’s assistant and an acquaintance and colleague of S. H. de Roos [who brought the Arts & Crafts ideas of William Morris to the Netherlands and devoted his career to book design and typography] with whom Jongert experimented with several printing techniques and discovered graphic design as his ideal art form.
¶ In 1923 Jongert rolled in a unique and long-term collaboration with the Van Nelle company, where he became head designer, a position he held until 1940. The Van Nelle company had an extremely modern approach towards advertising (they even commissioned Cassandre to do a poster) and Jongert created for the firm a recognizable image with clear shapes, powerful letters and primary colours, totally Dutch avant-garde in style, and with a strict and rigorous approach directly linked to De Stijl principles. The corporate identity he created has become a milestone in the design world.
¶ The lettering, however, is the driving force that ties it all together. The style is a straightforward set of plain, mono-linear, sans serif capitals in a style that just started to come into fashion in the late 1920s, early 1930s with the rise of functionalism and geometric type design. Yet, while these ideas were already thrown out there, its clever simplicity plus the systematic and cohesive way Jongert implemented his lettering was unusual at the time. The square and minimal construction of the forms allowed the letters to contract and expand to fit any situation, yet maintain a consistent and recognizable appearance throughout the Van Nelle line. ¶ Something we only recently have learned to appreciate is to see his hand crafted system amid the current advancements in variable-font technology, which offers a similar kind of flexibility to typeface designs. A quality that certainly placed him well ahead of its time.
What I particulary like about Jongert's original is the stuff that is going on in the lowercase set of the alphabet, which are those quirky lowercase letter inventions that are different from the more traditional modernist sans, but sadly the lowercase letters were pretty much never used in his works.
I created a simple PDF typeface specimen for those who want to see the high-resolution preview.
PDF SPECIMEN WAS DELETED
Thats all Folks ☚
☛ Cheers
BEACH RESORT — 1920s Art-Deco style
═══════════════════════════════════
Beach Resort is a tall geometric display sans inspired by the Art-Deco aesthetics.
It's condensed style makes up for a rather tall and narrow looking letter concept. The design is further characterized by this distinct asymmetric curve geometry. A tiny touch of stress was added on the vertical axis to create this gentle stroke contrast. The stressed weight of the horizontals automatically compensating it's optical correction issue.
— Only minimal kerning for now, more will be added soon
Hope y'all like it,
Cheers
REWINDER - A bold and decorative "I don't have a clue" style font.
Alternative lowercase versions for (a, c, e, g, j, m, n, o, q, s, u, v, w, y, z)
=============================================
Usually I design fonts from a general concept I have in mind and start with the Latin alphabet first since I am most familiar with these characters. Then when I have completed these I start adding extra language support. letting everything evolve from there on out into the other languages such as Cyrillic or Greek. Doing it in this fashion I find myself having the best change of doing a decent job designing characters I am not familiar with the right way and in line with the design parameters.
This time I starten designing the Cyrillic alphabet first, trying not to think about the Latin set design at all. I did this in an attempt to have a neutral mindset that wasn't influenced in doing it a certain way.
And I must admit, this was the best and most comfi time I ever did a Cyrillic set. I experienced a sense of having a lot more freedom for creative output.
The result became this cool looking "hell knows" what kind of style letterforms. I have no clue if I actually did a decent and accurate job at the Cyrillic set, and I'm not sure where to go from here on out either.
I hope you like it so far
Cheers
MIKITA - A "Chrome Script" style font based on the "Makita" logo type.
It is a simple 'semi' connected script, with only the basic character set. I don't feel like this requires having tons of typographic features. It is just aimed at writing simple things in this script style.
I hope you like it nonetheless
Cheers
KROEPOEK -Letterforms influenced by the orient.
=============================================
Simple geometry based design that tries to imitate Asian style letterforms.
=============================================
The font comes as a "all-caps"(majuscules) with the lowercase string used to include a set of glyph alternatives for the uppercase set, but cutting the descending parts of the glyphs.
As a little bonus, a set of underlined lowecase vowel alternatives (a, e, i, o, u and y) was also included to allow a small level of personal depth. These can be found in the Unicode block for: 'Halfwidth and Fullwidth Forms'
Besides the letters there is also a set of essential punctuation and symbols present to make the font proper functional.
=============================================
I hope you like it,
Cheers!
FORMALISMS - Modernist inline display type
Rigid square-based inlined modernist display style with incised (fake-) 3D effect, mimicing a quirky and non-logical take on twisted geometric form and sometimes folded appearance.
Some characters, but mainly symbols still need slight improvements, some are still missing as well.
The bi-linear stroke was incised at certain specific positions and had one or more (cross-)intersecting line segment included that connect the two colinear strokes. This is creating 2 additional extra geometric hyper-planes, and allows the option of including the illusion of looking at three-dimensional geometric objects.
But the way this is implemented into the design in fact obeys no relationship to any actual fundamental propeties and isn't necessarily a correct three-dimensional form, nor fully or faithfuly folded.
The glyphs also have somewhat of a monogram logo style quality
Hope you like it
Cheers
MOVIEMAX — Groovy bold & roundish 70s display sans
═══════════════════════════════════
Moviemax is a bold display sans-serif that has a groovy 70s offbeat look. Essentially an all-caps lettering concept with simple looking letters. The basic geometry and inversed contrast with its soft rounded finish create an immediate endearing effect.
The default characterset comes as all-caps (unicase) only, with no glyph alternative forms. It has been completed with additional symbols and punctuation marks.
To make thing a little more interresting I have also included a full (A-Z) alphabet set of small-caps letter modifications with drastically altered proportions. Complete removal of the inversed stressed contrast to make a more simplified and cleaner looking minimalist letter style. Their size was also reduced to 50% of the cap-height (scale ratio ≈ 1:2), providing an optional alternative for the missing lowercase forms in the font.
To finished off this extra set of small capital letters, another additional full (A-Z) alphabet set of large capital letters was included. These letters have also been scaled down a bit to better fit with the small capital letter set (scale ratio ≈ 6:8 or 75% of cap-height).
The 2 sets include a slight more unique and stylized level of sophisticated characteristics to the font, and when used combined together in a mixed-case text format creates nice text capitalization.
These alternative forms are located in the Halfwidth and Fullwidth Forms unicode block.
A set of basic punctuation marks that align with the small capital letters had also been included and could be found in the Halfwidth and Fullwidth Forms & Private Use Area 2 unicode blocks.
I hope y'all like it
Cheers
Shorter externsion variants for letters can be found at their lowercase equivalents. No extensions can be found at: A - @, C - o, E - {, G - }, H - #, J - ], K - \, L - [, N - %, Q - ^, R - `, S - $, X - ~, and Y - |. An underscore can also be used to make the extensions longer.
BACK TO THE FRAKTUR - Modular geometric calligraphic blackletter
============================================
Calligraphy inspired design, that even though it's name can be deceptive, suggesting one in thinking it is a Fraktur derivative. Which is actually quite not the case, and as far as being a calligraphic Blackletter inspired work, the similarities between the two stop.
This is a heavily simplified and geometric take on the calligraphic style, with much more modernized letterforms as well.
It remains a WIP, but I'd love to hear what u think so far.
Cheers
Opening day of Marvel's "The Marvels" movie! Couldn't resist making a chibi version of Goose, the Flerken from the original Captain Marvel film. #StrongestAvenger
This allcaps font is meant to be used starting with a Capital letter, then lowercase letters following it. But no one will listen, will they?
This is a cloneBENGALIQUE - Contemporary grotesk type
A condensed geometric Grotesque style, that at first glimpse looks somewhat simplistic. And for the larger part this is true. The goal was to do a ever so slightly spiced up take on this 19th Century classic style.
At it's core, the letterforms have this strong geometric grotesque backbone that is easy to recognize.
While trying to preserve that unpolished characteristic classic Grotesque basic form, I attempted implementing some personal twists, hoping to make a more contemporary but faithful variation to it's crude classic renegade traditions.
Some of the more distinguishing features for this font are it's heavily condensed style, the somewhat quirky curvatures, overshoot and/-or tapered ends in certain 'sweet spots' on a glyph's leg or terminal.
At random some legs will also ascend and descend just a tiny tad bit, gently adding this extra layer of dynamic depth and playfulness.
Spurs are slightly tapered, counters, negative spaces are in mostly rectangular and do not mirror their convex outer curves, in fact the only concave curvatures within a partially enclosed negative space are those that have strokes intersecting or when a curved shape is used to replace diagonals.
(such as; "B, Kk, Ss, Xx, Y, Zz" numerals; "2, 3, 5, 8")
Note that a couple more unmentioned characters make use of concave curves as well to accentuate specific choices.
(such as; "R, t, ß, etc.")
Visual corrections and optical compensating was exclusively performed on the top part of the glyphs, not their bottom.
-- Some additional side-bearing and kerning is still required --
No filters used...
The font works best for 'Display Type' at most point size. In smaller quantities it can be used for 'Body Type' as well with some proper adjustments to the horizontal spacing. But, nonetheless the font's condensed nature, it's tight letter spacing and some thinner strokes still heavilly affect the flexibility for legible Body-Type-use.
Recommended size for Digital-Display-use is 28pts or higher, and bellow 20pts the font becomes unreadable in Digital-Display-use. But I hope you like it so far, and feel free to let me know what u guys think! ?
That's all for now folks..
Cheers
STF_ELEGANZA (Therapy) ―Contemporary geometric humanist sans
══════════════════════════════════
A font style, that while simplified by old tradition, saw new light by modern sophistication.
It comes in a solid medium weight that is very suitable for body style text with good readability, but it does perfect clean headlines or ads as well.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The goal was to make a clean but somewhat more contemporary and playful take on a 'Grotesque' sans-style.
In an attempt to break away from the traditional trend of Grotesque type designs which evolved more around pure geometric shapes and aim for perfect circular, triangular or square shaped letterforms, that in return give many of them a somewhat harsch and featureless mechanical appearance, I choose to try and achieve the opposite, aiming for a softer, friendlier and more humanized feeling instead.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Dimensions: (in grid units)
X-Height: 1 .625
Cap-Height: 1 .875
Em: 3 .5
Brick Size filter: 2 : 2
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
This is the 'Therapy'-style in the 'ELEGANZA' typeface family. This version basically aims for the exact opposite effect than what the Tight' version did. The name 'Therapy' relates to its 'opened-up' appearence and the overall de-stressed propperties of this version. The more relaxed and spacious distribution remotely resembles the characteristic feel of a typewriter face. But the main purpose for this version is to create visual hierarchy in your layout.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The other style variations can be found here:
ELEGANZA (Tight)
ELEGANZA (Tall)
I hope you like it...
This is a clone of STF_ELEGANZA (Tight)TYPOGRAAF — Geometric modernist display typeface
═══════════════════════════════════
Typograaf is simple looking modernist style aimed for display use. It doesn't work well in a long line if text nor at smaller sizes. But perfect for large display work, logo's and such. The letterforms have several little nuances and multiple custom crafted curved parts with smooth (near) real Bézier contour quality.
So far only general concept plus some extra's was created, no multilingual suport for now.
Let me know what you think
Cheers
BOUWHUIS - 'Bauhaus'-modernism inspired minimalist geometric sans
════════════════════════════════
I am in a Bauhaus-vibe last couple of day..
So here is yet another venture into the modernist minimalism aesthetics of the previous century.
════════════════════════════════
This Font losely draws on the basic concept for the 'Universal Type' that was originally designed by Bauhaus student Herbert Bayer.
It's basically a hugely inspired tribute to Herbert Bayer's several forms of ―'Universal'.
But I want to be clear on the fact that this isn't a revival of the original alphabet or anything along those lines for that matter.
Instead it is a intermingling personal interpretation of his multiple works and ideas. Attempting to merge this recollection of Bayer's rational 'functionalist'-approach towards combining aesthetics and function, as by which he is answering to the 'Bauhaus'-philosophy and the 'Form follows function'― design principle.
But besides being a 'inspired' recollection, still the main focus for this FontStruction was to come up with this personalized and stylistic derivative version that pays homage to various of his original work. Unifying the various characteristic Bayer idea's-n-bits within my personal visual representation of the general concept into a new piece.
For it's primary style-concept I envisioned BOUWHUIS being something fresh and somewhat different from the gross majority of similar inspired works out there. This led to the decision for going with a more contemporary and modernized (― as oposed to modernist) style lettering.
In addition to that I pursued a much more vibrant and nuanced typographers sensitivity towards letterform calligraphy and decorative features.
Strong geometric core elements of the font make up for a expressive simplistic structural basic form and it has 'zero' stroke modulation for thickness.
It's regular weight combined with that predominant circular and square-based geometry of the letterforms result in this 'open', and overall ventilated characteristic of the design.
The typical crude appearance that usually comes with a strong geometric sans like this was compensated for in BOUWHUIS by the design's subtle deviations in form and the various decorative calligraphic letter-components.
Something that completely denied Bayer's principle in approach to modern typography and to create an "idealist typeface" was; The reintroduction of it's uppercase letters.
Part of Bayer's rationale was to simplify typesetting, strip all that he felt was unnecessary or the typeface had no need for in order to function, till there was not much more left than just the nearly bare-naked form.
It seems that unintentionally some innuendo of Art-Deco―flavoured hints also found their way into parts of this design.... ―Hmmmz
― but I think I like them, so no worries on behalf of that
════════════════════════════════
As a little bonus topping it all off there is also a super tiny experimental lowercase caracter-set (X-Height=1 grid unit)
Located in the Unicode block for "Halfwidth and fullwidth forms"
I hope y'all like it so far, more will follow soon.
Cheers