Searching for more “Geometric” fonts?
Buy and download “Geometric” fonts at MyFonts.
Custom bold, beveled and fixed width font for the homemade handheld console MAD×DOG by INSANUS
https://twitter.com/LupusInsanus/status/1145113251027542017
An experimental 3-D/geometric font, inspired by Mynameiscapo's "Metal Hammer [beta]". My first attempt was "InTrude"; I tried to make it look like it's coming right out of the screen or off of the page, but it wasn't what I was looking for. After retooling it, here is the result: it works! See all fonts: "Backtrude", "OneQuarterTrude", "OneQuarterTrude Inverse", "MidTrude", "ThreeQuarterTrude", "ThreeQuarterTrude Inverse", "ExTrude", "InTrude", and "FrontTrude"
FRUNTSTOCT — FontStruct logotype reinterpretation
═══════════════════════════════════
For all ya failed attempts at re-creating the FontStruct logo typeface.
Many have tried their take on it, most without convincing succes, and often looking downright horrible.
Two of the most commonly made mistakes are.. 1) The introduction of a uppercase alphabet 2) Having a tendency for including far too many stuff in terms of extended language and typographic support, aiming for large multi-lingual character-sets with as many glyphs possible.
The lettering for the FS-logotype has this very distinctive modular geometric stencil concept. The underlying glyph structure consists of 5 horizontal rectangular segments, that together with a custom set of simple geometric blocks form a modular system that can be easily re-modeled or re-arranged to form the different letters and required parts that help to distinguish each individual letter from one another.
The modular system itself is highly simplified and easily accessible to implement additional changes. But typically speaking a simplified modular system comes at a price. And the further a system was simplified, the greater the amount of limitations will be. Which literally translates to a reduction in overall design depth and freedom to implement a more diverse complexity.
—TECHNICAL SPECS:
[Dimensions] Segments
X-Height — 3
Cap-Height — 4
Ascender — 1
Descender — 1
[Filters] Value
Horizontal Brick Size — 2
Vertical Brick Size — 1.8
Horizontal Grid Scale — 0.9
Vertical Grid Scale — 1
In case of this FS-logotype concept, there are a number of key components that put in place this very strict window of parameter-locked propperties, that exclude all but a few remaining options which could still be exploited, and therefor fully dictate whatever is, or is not possible.
Having only 5 segments, limited geometric components and highly restrictive rearrangeable capabilities towards implementing variation all adding up to the difficulty-level for extrapolating some of its more complex and- / or denser forms, symbols accents and puntuation marks.
To cramp excessive amounts of complexity into a very narrow band of realestate would have a certain negative wear on its aesthetic qualities. And is likely to result in a combination of messy glyph composites and queer-looking letter-inventions, contrapped in a mish-mash of irregular and gawky looking, at times even disfiguring geometry that sit at the heart of this problem.
This is exactly where those bad choices can either make or break your font. The modular system for FS's lettering clearly isn't the most suitable of fonts for uppercase forms and complex geometry.
This doesn't mean that it is impossible, as was demonstrated by a small number of re-interpretations that actually do include fairly decent uppercase inventions. One of such that have successfully pulled off the inclusion of a uppercase set for his rework of the logo typeface was Zhalgas Kassymkulov—previously known as architaraz.
His attempt is a beautiful display of craftmanship and clever simplicity.
Here is a list of attempts that I think are successful re-interpretations of the original FontStruct logo:
Structurosa Italic — by four
AT Archistruct Outline — by kassymkulov
Structurosa— by pauldhunt
FS Logotype — by WeDoFonts
pixelstructia — by gamesgames
fs Colophon — by user-juli
fs sanstruct — by ETHproductions
Realised — by thezenmaster1000
Structurosa Bold — by pauldhunt
FontStrukt 2 Soft — by Jamie Place (FontBlast)
Structurosa Bold Too — by pauldhunt
— WHUTZINSIDE THIS FRUNTSTOCTION?
Now, a extensive explanation for the decision to not include uppercase forms to the font, as well as for the constraint on total character amount had been broadly covered above. I think that small caps numeral figures make a much more sleek looking glyph, and tying the overall character set much more together as a whole.
Another, and I say, rather more unique feature found in my version of the lettering is only a subtle one in fact. One that mostly works invisibly, that without the awareness of the reader, is easily missed. And can only truly visually materialize and appreciated seen up close. This is the implementation of several slight deviations and custom sculpting of certain curvatures and round features. Introducing an ever so slightly more diverse dynamic, but also taps deeper into some of that shape contrast propperties.
In addition to that I've also included several glyph alternative forms and small number of ligatures to play around with.
among these glyph alternates there is also this continuous string of 13 rather experimental looking glyph variations for the lowercase letter 's'.
These aren't actually meant to be usable characters, but instead is a collage of different configurations that make various curved geometry, and are simply stored in a glyph-style fashion that provides an actual physical estimation on their appearence and for me to test their functional values in a text format.
So far so good,
I am happy with how the font turned out to be, it is fairly consistent looking and still remains quite usable as a font.
That's all for now folks...
Cheers.
BATAVIER (Pro) — Geometric display sans
═══════════════════════════════════
[ MEMOIR ]
Revision / revival of the geometric lettering seen on a 1916 Dutch litho poster for the Wm H. Müller & Co.'sRotterdam-London passenger service called Batavier-Line(Batavier-Lijn in Dutch) which was originally designed by Bart van der Leck(1876 - 1958).
The Batavier Line existed from 1830-1960, and was the oldest steam shipping line in The Netherlands.
[ UPDATE INTEL ]
A couple of small changes were implemented compared to v/d Leck's original lettering. Most significant is the upscaled Ampersand, but numerous other small cosmetic or optimizing modifications were made as well.
I completed the full alphabet plus numerals and included additional symbols and punctuation marks to make it a fully functional typeface. The lettering is all caps (majescule) only. Some lowercase letter locations harbour a glyph alternate uppercase form as could be seen in the original litho poster source. Another bunch of alternate uppercase forms and underlined “superior” small capital letters were located in the “Halfwidth And Fullwidth Forms” Unicode block. In addition to that it has accented Latin letters for multilingual support. Also two resized alternate forms for the Ampersand and two stylish ligatures have been included.
[ SUMMARY ]
This is actually the second revision I did for the litho lettering by v/d Leck. The first attempt was made using a (faux-) Bézier approach, resulting in a huge grid canvas (168 grid units / bricks tall monstrosity). This made it a lot of hard work to build and for some letters impossible to properly implement kerning since FS values only allows min. -10 / max. 10 of grid units for kerning.
As part of the endeavor to refurbish some of my older FontStructions STF BATAVIER was one of those that was in serious need of some overhauling as well. The problem it presented was the font's cap-height. It was actually so tall and impractical to work and / or modify, that the first revival attempt never really fully materialized beyond a basic character set.
A full glyph only fitted on screen with the FS-editor zoomed-out max. and my browser zoomed-out at 30%. At this scale not only the canvas grid lines in FS's editor all but dissapeared, but it also resulted in a down-sized brick (or 1 square grid unit) with on-screen rendering at only 3×3 pixels, as oposed to 64×64 pixels with the FS-editor's default zoom settings.
So imagine selecting a tiny 3×3 px speck when working the glyph canvas at brick level to modify glyphs... pretty much impossible. Now, the other situation wasn't a whole lot better. This had the browser's zoom restored back to 100%, making the glyph canvas at brick level “workable” again. But in respect to the cap-height this only renders a very small section of the glyph on-screen. Requiring a huge deal of additional canvas navigation in FS's canvas editor, better known as “Pan the view (H)”, which is done with the hand tool.
And well, as many of you will know, this is an absolute bummer When navigating (or panning) a glyph bottom to top requires 3 full canvas swipes.
So yeah, the only way for an extended version ever to materialize was to be rebuild it from the ground up at a much small scale, using very different measurement ratios compatible with FontStruct's kerning.
[ TECH INTEL ]
This second revision attempt successfully reduced the font's cap-height down to a comfortable 5 bricks (or grid units) tall and Em-square of 7 bricks total. Some optical compensations were implemented to certain elements such as stroke weight corrections and careful minute differences in vertical positioning of letter mid-section elements.
For now thats all Folks..
Cheers
Brush script, art deco, classic engraving, three genera of gothic (sans serif, blackletter, and ancient alphabet!), runic, hieroglyphic, and yet still some futuristic tendencies all informed me. But do they blend?
The handwritten quality of a broad-nibbed pen or skillfully wielded marker provides the binding agent. An emulsion of all these influences, it is at once all and none. Even the strict modularity begins to melt into the background. Yet so distinctly fontstruct...
This is a cloneThis should have been a minimum font, but minimum can't do color.
The idea was to simulate transparency. After trying out multiple color hatch patterns, it was apparent that it is not going to work. The earlier attempts are left in the font for you to judge yourself their efficacy.
The file is pretty heavy because of having so many anchor points (times 8 layers). Scrolling will be slow. Because the next letter overlapping the previous hides part of the black outline, just outline glyphs are there to stack two layers (colored below, outline above) to get the correct effect.
Is there some trick to make the downloaded font to work in color? The version I downloaded comes as *-svg.ttf. Aren't the color svg fonts in .otf format? Thus, no sample.
Let not the death of our elders be the demise of our ways of life. Let not the passage of time be measured in the passing of languages beyond all living memory.
Based on the Lakota orthography © 1982 Leroy C. Curley.
Extended character and symbol set by William Leverette
This is a cloneSome kind of great big ol' chain.
In retrospect, I think it looks like a jewelry chain from a dwarven civilization. Perhaps the hypothetical jeweler cut and ground the stones in an imitation of some dwarven font!
When glyphs are used in isolation, they somewhat resemble carved signets or seals. Increasing the letter spacing allows you to create a variation of the design. (This is something that must be done in-software since the font will render as monospaced by default.)
*
12SEP2018: Added lowercase... the low resolution combined with the design method make it very difficult to render distinctive lowercase versions of every letter, but I'll keep working on it. There's a lot of similarity between pairs like S/5, Z/2, etc., so this font is most effectively used in forms of writing wherein context suffices to inform the reader as to the identity of each glyph (lists, prose, and technical writings). If you want to use this in a password system or something, I recommend using one case's glyphs only.
*
Design Rules:
1. Negative spaces will be areas of 0.5 bricks' effective length or width.
2. Negative spaces may exceed the 0.5 measurement only by increments of 0.5 and in only one dimension at a time.
3. Glyphs will fill their framed canvasses to the greatest extent possible while adhering to the other rules.
Where are the caps? Who cares? A bold, minimal-grid font so named because it looks sort of jellybeany. Kind of. I'm still not sure I like how dark the 'k' seems, but any fix looks worse. If there's demand, I'll add an accented set, perhaps.
«Update 2017-03-29» – I've reworked the aforementioned K. I've changed the lowercase to be a thinner version, along with much of the punctuation. I've even filled out the Latin-1 Supplement, though I loosen up considerably on the basic design elements to get things to work within the established grid.