1801812
Published: 2nd May, 2024
Last edited: 6th March, 2009
Created: 6th March, 2009
This font is based on the Silkscreen font created by Jason Kottke, and contains some more characters than the original Silkscreen does. It contains the nordic characters ÆØÅÖÄ, and most other characters with diaresises, acutes, and graves, but only one letter with a circumflex because of character size problems (the character would be too high with a circumflex on top).
As with Silkscreen, this font should be used with a font size of 8pt. multiples (8pt., 16pt., 24pt., etc) with anti-aliasing turned off.
Another version of the Silkscreen font is the Silkscreen Alt, which has some small changes to some of the characters, but doesn't contain any more charaters than the original Silkscreen.
15421914
Published: 2nd May, 2024
Last edited: 14th February, 2009
Created: 14th February, 2009
This is a condensed version of the Dot Matrix LCD Font used on the Ricoh Aficio AP3800C, Aficio AP3200 and AP306D printers, among others.
I have also added some letters myself, and some extra symbols used on these printers.
It doesn't contain the copyright, registered trademark or trademark symbols.
Since this is a condensed font, not all characters are the same width.
This font looks somewhat like the Lucid font, but the lowercase letters are different:
http://fontstruct.fontshop.com/fontstructions/show/48410This is a clone of LCD Dot Matrix
23713921858
Published: 10th March, 2007
Last edited: 12th April, 2018
Created: 10th March, 2007
This is the first ever FontStruction.
A simple pixel font based on a 6 x 8 matrix of squares.
219813014
Published: 4th March, 2008
Last edited: 2nd September, 2009
Created: 4th March, 2008
Narrower version of minimeek. Tiny but legible.This is a clone of minimeek extended
4701016
Published: 20th April, 2008
Last edited: 22nd April, 2008
Created: 20th April, 2008
pixel font, tried to give it some contrast in the verticals.
update 01: changed numbers so match lower-case and the ampersand
2731054
Published: 12th May, 2008
Last edited: 27th September, 2010
Created: 12th May, 2008
The font used in the logo of the band Datarock.
Based on the following characters used on the (old) Datarock homepage:
A, B, C, D, E, F, G, H, I, K, L, M, N, O, P, Q, R, S, T, U, W, Y.
I later found out that the original font is called FFF Intelligent (using WhatTheFont). So I'll update this font to look more like that font.This is a clone
203797
Published: 12th May, 2008
Last edited: 24th April, 2011
Created: 12th May, 2008
Based on the DOS font antique
Not that many characters at the moment, but I'll add more later.
The original DOS .fnt file could be found here: antique.fnt
901952
Published: 13th May, 2008
Last edited: 24th April, 2011
Created: 13th May, 2008
.:scrawl:.
This font is based on the DOS font scrawl.
The original DOS .fnt file could be found here: scrawl-1.fnt.
952279
Published: 22nd May, 2008
Last edited: 9th June, 2010
Created: 22nd May, 2008
hi there.
i'm into graffiti for about 16 years now. my hommage to one of the best inventions ever been made!
cans!
have fun!
340987
Published: 23rd May, 2008
Last edited: 16th June, 2009
Created: 23rd May, 2008
Original Silkscreen font was created by Jason Kottke (http://www.kottke.org/plus/type/silkscreen/index.html).
Silkscreen Alt is based on the original font, but it also contains several character modifications (E, F, G, I, R, 4 and +).
Silkscreen Alt should be used at 8px multiples (ie. 8, 16, 24, etc).This is a clone
12942626110
Published: 26th May, 2008
Last edited: 29th January, 2014
Created: 26th May, 2008
OK!
theres one piece of skyline for every letter. the part with the moon on it is the "M".
:)
25463817
Published: 13th June, 2008
Last edited: 9th June, 2010
Created: 13th June, 2008
A-Z, 0-9 and a question mark.until now. maybe i retouch it at any time...
enjoy playing!
4232065
Published: 3rd July, 2008
Last edited: 15th June, 2009
Created: 3rd July, 2008
the most logic font i can imagine... maybe this was done a thousand times before but it was worth it.
12668316
Published: 23rd July, 2008
Last edited: 8th October, 2014
Created: 17th July, 2008
Clone of atomic scissors.
Caps only cutout font. Every character has an alternative (uppercase) form under the lowercase keys. Pick your favourite, or better: use them alternately in the same text to enhance the liveliness! Grrr! Cut! This is a clone of atomic scissors
366945
Published: 1st August, 2008
Last edited: 29th January, 2014
Created: 1st August, 2008
Hopefully taking the "roundness" on fontstructors-heaven to another level...
This wouldn't have been possible without the holy master williaum who cracked up the applet to bring us the mighty magic bricks!
*name changed into "orica"!
6211564
Published: 2nd August, 2008
Last edited: 17th March, 2014
Created: 2nd August, 2008
inspired by a sticker of an english band called lost prophets...
418116630
Published: 18th November, 2008
Last edited: 4th December, 2009
Created: 18th November, 2008
A mash-up of sorts. Microgramma meets Dr. Robert Moog.
15631916
Published: 27th January, 2009
Last edited: 18th February, 2009
Created: 26th January, 2009
This is the Dot Matrix LCD Font used on the Ricoh Aficio AP3800C, Aficio AP3200 and AP306D printers, among others. The uppercase letters is the same as those used in the HD44780 Character LCD-screen wich is a de facto industry standard LCD.
I have also added some letters myself, and some extra symbols used on these printers.
It doesn't contain the copyright, registered trademark or trademark symbols.
This font looks somewhat like the Lucid font, but the lowercase letters are different:
http://fontstruct.fontshop.com/fontstructions/show/48410
420107135
Published: 31st January, 2009
Last edited: 9th June, 2010
Created: 30th January, 2009
it's an old idea, but i think this one needed to be done.
not sure about numerals but there will be some more symbols i think.
enjoy and download, steal and use it:)
187116315
Published: 9th February, 2009
Last edited: 16th June, 2009
Created: 4th January, 2009
Loosely based on several styles of letter and numeral forms observed on various aircrafts at the Evergreen Aviation & Space Museum in McMinnville, Oregon. The museum is home of Howard Hughes Flying Boat H-4 Hercules (aka, the Spruce Goose).This is a clone
16866824
Published: 10th February, 2009
Last edited: 23rd November, 2009
Created: 9th February, 2009
Loosely based on several styles of letter and numeral forms observed on various aircrafts at the Evergreen Aviation & Space Museum in McMinnville, Oregon. The museum is home of Howard Hughes Flying Boat H-4 Hercules (aka, the Spruce Goose).
Jetstream is a clone of Perforate. Jetstream's x-height is higher. The uppercase horizontals are narrower. The lowercase 'a' was made two-story. Without the constraints of the perforations, I was able to better center the crossbar of lowercase 'e', 's' and 'x'. Some numerals have also been modified.This is a clone of Perforate
466437
Published: 12th February, 2009
Last edited: 9th June, 2010
Created: 12th February, 2009
just another outfit :)
geneus1 made something kind of similar called "Flame on", a spin-off of our legendary collabs!
i highly respect his work, but did i steal STRIPES ??!
*just kidding :)
This is a clone of FS MULTIVERSE Alaska
580688
Published: 12th February, 2009
Last edited: 9th June, 2010
Created: 12th February, 2009
ok.
i think the basic version of MULTIVERSE is the right place to say something about its development.
In the first place, the first member of the MULTIVERSE family, called MULTIVERSE*sunburst, came up with a quite simple, minimalistic form/style, because i tried to catch the main focus on it's fading effect.
So to say, the form/style had total secondary priority.
Nevertheless the "minimalism" of this font, which is completely done with the use of a 45° angle,
felt just perfect for trying out some stuff.
call it a phase...
i got a massive amount of ideas to dress this little SOAB!
:)
High five from germany.
i feel deep love for all of you crazy FSors being just as addicted as i am :P
there will be a sample for all of'em soon, btw...This is a clone of FS MULTIVERSE Stripes
170311
Published: 4th March, 2009
Last edited: 8th March, 2009
Created: 4th March, 2009
This font is based on the title font used in the "Chien" CSS Zen Garden design by Alex Miller, available at:
http://www.csszengarden.com/?cssfile=/164/164.css&page=6
I have added some other characters, that is: J, K, X, Z, ., ! and _.
I'm not satisfied with how the "Z" turned out, so maybe I'll change that later.
150620521
Published: 4th March, 2009
Last edited: 29th January, 2014
Created: 4th March, 2009
Hey fellas!
i know it seems kind of "up to date" to dot around, but beate and her(?) featured download inspired me to experience some DOTTING as well.
The cool thing about using dots is, that the viewers eye/brain/imagination does the MAIN part while viewing it.
There are 8(!) more different angles possible, because of the half circle bricks...
hope you like it!
cheers kix
2733274
Published: 6th March, 2009
Last edited: 11th March, 2009
Created: 6th March, 2009
This font is based on the Mini7 font created by Joe Gillespie, and contains some more characters than the original font does, but it also misses some characters that the original font has, because these characters isn't available in FontStruct yet (AFAIK).
I have also made an alternative Q with a descender, like the one in the Silkscreen/Slikscreen font, you will find this as the lowercase Q, while the uppercase Q is the same as in Mini7 with no descenders.This is a clone of Slikscreen
4109912
Published: 17th April, 2009
Last edited: 15th June, 2009
Created: 14th March, 2009
This clone of Unbranded has higher ascenders and changes to the numerals, punctuation, and a few letters. It is truly pixel-optimized, using only square blocks, and so it looks better than Unbranded at small (1-block-to-1-pixel) resolutions but somewhat worse at larger ones.This is a clone of Unbranded