ColorComp entry, inspired by the Memphis art style. I started this originally a few years ago with several color variations (using the three main colors), but I couldn't decide which ones to go with, so this sat unfinished for a while. In the end I decided to go with this.

Recreation of the pixel font from John M. Phillips/Hewson's "Nebulus" (1987) on the Commodore 64.

Only the characters present in the game's tile set have been included.

This is the black and white version of Gameatile. For the color version, see this.

The black and white version should only be used when the software you want to use it in does not support the COLR color fonts.

— Inspirations —

Tiles Final by JOEY_TOYS_

Dominoes by JOEY_TOYS_

Tiles and Dominoes by tredakam30

— Private Use Assignments —

E000-E7FF: My usual 7-segment and arbitrary fraction characters for monospaced fonts

E800-E81F: Single tiles for 0, and 7-18; The tiles for 1-6 are in the Miscellaneous Symbols Unicode block

E820-E83F: Top parts of dominoes 

E840-E85F: Bottom parts of dominoes

E860-E87F: Left parts of dominoes

E880-E89F: Right parts of dominoes

A blackletter-inspired unicase design. I'm thinking this will look good on certificates, diplomas and all sorts of official documents where readability is secondary. I've got some spacing adjustments to make in the punctuation.

TrueType + COLR is recommended when downloading for the most software support. For the black and white version, see this.

The color version should be used in software that supports the COLR color fonts.

— Inspirations —

Tiles Final by JOEY_TOYS_

Dominoes by JOEY_TOYS_

Tiles and Dominoes by tredakam30

— Private Use Assignments —

E000-E7FF: My usual 7-segment and arbitrary fraction characters for monospaced fonts

E800-E81F: Single tiles for 0, and 7-18; The tiles for 1-6 are in the Miscellaneous Symbols Unicode block

E820-E83F: Top parts of dominoes 

E840-E85F: Bottom parts of dominoes

E860-E87F: Left parts of dominoes

E880-E89F: Right parts of dominoes

See more:

https://fontstruct.com/fontstructions/show/989729/fraktur_refined

Chrysalide Old Face | FontStruct

https://fontstruct.com/fontstructions/show/2629304/echo-pixel-garalde-cyrillic

Garamond Italic SP | FontStruct

fs Fermat | FontStruct

RuneScape Large | FontStruct

I did it. I combined the uncombinable… but at what cost?

100% free. Alternates to make the serifs just a little bit less messy. 

Opening day of Marvel's Captain America: New World Order movie! 

It's been so long since I've worked on a fontstruction, I forgot how to stack composite bricks. It's like going back to the gym after a long break and I can't do any heavy lifting and I'll be sore from it tomorrow.

This design is very retro Cap. The fill is a throwback to the original Captain America's comic book chain mail suit material. 

Added Vietnamese symbols to the font. Original font by @Aoneko1608

made this using my drawing tablet

i tried mimicking real ink as closely as possible

WOLKENKRABBERS — Condensed streamline Art Deco style lettering
═════════════════════════════════
 

Enjoy!

Who even IS JeycoMonge?

It's about as readable as it gets

Inspired by Arial, DIN 1451, and Rajdhani

STF_DECOBAU — Bauhaus got Art-Decoized
═══════════════════════════════════

This is probably what would've been if one was to ask Herbert Bayer to design an Art-Deco style typeface.

Who doesn't like to kick-off the start of this New Year with a freshly lettered breakfast, and celebrate the arrival of 2025 extra stylish…
—Lets say in a Retro fashion!?!

Here is yet another of my blind leaps in-at-deep-end in the Bauhaus—pool. For this one in particular I have Art-Decoed  the living sh*t outta Bayer's defenceless innocent little baby child Universal —"Boii was I lucky that the world was too damn p4rty-h4rdy last night, bussy celebrating New Years eve. Cuz I gotta tell u this folks, she was screaming at the top of her lungs"  #nobodycame2rescue

The font is obviously not your best pick for a large chunk of Body-copy text, and is best used solely for Display application purpose.

There is only a limited character set present, but thats alright, since the font has more of a "decorative" value anyway.
Due to the complex nature in these small grid glyphs the characters lack nearly all optical compensations typically seen. —So yeah, this time y'all have to settle with missing overshoots and such.

Kerning is a WIP,
So keep in mind that at this stage this remains very incomplete!

I hope y'all still like it,

Cheers

This italic was more difficult to build than I espected (especially the glyphs K, M, S, X, g, k, x, 2, 5, 6, 8, ß and a few others). There are still shapes that are very hard to achieve using the current FontStruct's tools... but nothing is completely impossible if you dedicate the time to it, the results are often surprising. So it also took me much more time to complete the entire character set, but I'm happy about the final aspect of the font: it looks curiously forceful, positive and fresh at the same time, and I like it, despite not being 100% happy with some glyphs. Kerning isn't finished. Suggestions are welcome, folks. This is my 2024 font for Xmas: Happy holidays to you and yours, dear Rob Meek and all the FontStructors wherever you are!

STF_WALDBAUER — Condensed modernist Bauhaus sans
═══════════════════════════════════

This is rather a heavily condensed sans that sits halfway between a Bauhaus and Art-Deco style lettering.

The low waist, tall x-height, long ascenders and deep descenders give this font a somewhat elegant appeal. The uppercase set is clearly Art-Deco inspired, whereas the lowercase set leans more towards a playful Bauhaus mondernist style. Several characters have filled enclosed parts or other exaggerated features as well as non-filled alternate forms.

The idea for this font was inspired and extracted from a 1930s poster ad by Pál Vince for luxury luggage company Waldbauer.

The FontStruction's x-height is 3,5×1 grid units, so its tiny!

I hope you like it,

Cheers

It’s a text cut of those Bauhaus fonts trending on FS about a year ago.

I'll do the rest of the kerning later lmao

why

JS-SANS BEVEL (OUTLINE) — Geometric Sans-Serif
═══════════════════════════════════
Another font addition to the ever evolving and growing collection of revivals and inspired works called LETTERS OP MAAT, a project celebrating and trying to recreate the typographic contributions originally designed by Dutch graphic designer Jurriaan Schrofer.

This time I did a revival based on a sans-serif lettering concept Schrofer did in the late 1960s during his time with Mouton & Co..

The alphabet system was later featured on several book cover prints such as: "Marx and contemporary scientific thought"  from 1970, "Images of the world in the year 2001" from 1976, "Repro en Druk" (Weekblad van het Koninklijk Verbond van Grafische Ondernemingen) from 1981, and several more.

I decided to create a typeface family with two styles, SOLID & OUTLINE.

In addition to that I included an uppercase letterset, symbols and punctuation marks as well..

I hope you like it,

Interrested in more of my Jurriaan Schrofer recaps? Please take a look a my complete collection of Fontstructions tagged with STF-LETTERS OP MAAT for the full catalog of fonts I contributed to this project so far.

Cheers

JS-SANS BEVEL (SOLID) — Geometric Sans-Serif
═══════════════════════════════════
Another font addition to the ever evolving and growing collection of revivals and inspired works called LETTERS OP MAAT, a project celebrating and trying to recreate the typographic contributions originally designed by Dutch graphic designer Jurriaan Schrofer.

This time I did a revival based on a sans-serif lettering concept Schrofer did in the late 1960s during his time with Mouton & Co..

The alphabet system was later featured on several book cover prints such as: "Marx and contemporary scientific thought"  from 1970, "Images of the world in the year 2001" from 1976, "Repro en Druk" (Weekblad van het Koninklijk Verbond van Grafische Ondernemingen) from 1981, and several more.

I decided to create a typeface family with two styles, SOLID & OUTLINE.

In addition to that I included an uppercase letterset, symbols and punctuation marks as well..

I hope you like it,

Interrested in more of my Jurriaan Schrofer inspired? Please take a look a my complete collection of Fontstructions tagged with STF-LETTERS OP MAAT for the full catalog of fonts I contributed to this project so far.

Cheers