BEACH RESORT — 1920s Art-Deco style
═══════════════════════════════════
Beach Resort is a tall geometric display sans inspired by the Art-Deco aesthetics.
It's condensed style makes up for a rather tall and narrow looking letter concept. The design is further characterized by this distinct asymmetric curve geometry. A tiny touch of stress was added on the vertical axis to create this gentle stroke contrast. The stressed weight of the horizontals automatically compensating it's optical correction issue.
— Only minimal kerning for now, more will be added soon
Hope y'all like it,
Cheers
MODERN TYPEWRITER - Typewriter style Slab-Serif
============================================
The idea was do a simple, clean and solid looking design that mimics the looks of a classic typewriter style typeface used for form fill writing style.
The rectangular shaped concept was carefully chosen to provide this nice mechanical looking forms, and to further enhance the technical style concept of this design.
RINKEL — Bold constructivist display design
════════════════════════════════════
This was very much influenced by the rare sighting of
1974's Lettergraphics International typeface by the name 'Belden'
Belden was shown in a Lettergraphics ad in U&lc vol. 1, no. 3 from 1974, without further design credits. It was also featured in the book cover design for "Metaphysics: An Introduction" by Keith Campbell.
—Which in terms I have used for my personal extrapolation of the complete character set of this FontStruction.
────────────────────────────────────
Not a digitizing revival of the original piece, but rather a very strongly inspired personal take on it.
—More complete character set is coming soon..
Let me know what u fellow structivists think of it so far!
Cheers
Inspired by KD Experiments 02 by architaraz
STF_FRONTAL BOSSING - A groovy bold and rounded Sans Serif typeface.
═══════════════════════════════════
This is going to be my second entry in the "HeavyComp"
═══════════════════════════════════
ABOUT THIS FONTSTRUCTION:
TECHNICAL:
Grid: 17 × 16 square grid units (incl. descends, overshoots, accents)
Filter: 2 × 2 brick size
BIO:
The idea was to come up with a friendly chubby fella.
And for all I know I think I have done just that. In the end, it does seem to appear it came out with a slightly bigger forehead than the average (but, no love was lost here, we have come to learn to appreciate the misfits).
Despite its weight and slightly clumsy appearance this juicy Mr. Boogie still got dat funk, and can not wait for it to be the next saturday night.
Even so, when he for once isn't told to "Swing and Boogie" he still is nice to have hanging around. His friendly persona is only to be matched by the ever so nice soft curves. "No sharp edges to detect here".
I can only hope for that all of you come to appreciate him as well! ;-)
(Let's do this in another language as well)
CONCEPT:
The idea was to make a letterform that has a friendly looking design. I tried to achieve this by way of softening all hard convex corners with a smooth rounded curve. And by "all" I litteraly meant, even on all diagonals, accents, thin strokes and stroke tips (Nothing was left untouched).
For all the concave corners, so the negative space (white space) of the letters have multiple solutions depending on what is happening (does it curve, intersect and or wether a stroke continues or not)
The curves all have near hi-res looking (a couple of minute imperfections) but otherwise smooth surfaces, and there are multiple custom created ratios/transitions, such as:
1.5×1.5, 2.5×2.5, 2.5×3, 3×4 (+ The bullet is a 7×7 circular dot)
I hope you like it,
Cheers
(PS: Sample follows soon)
REWINDER - A bold and decorative "I don't have a clue" style font.
Alternative lowercase versions for (a, c, e, g, j, m, n, o, q, s, u, v, w, y, z)
=============================================
Usually I design fonts from a general concept I have in mind and start with the Latin alphabet first since I am most familiar with these characters. Then when I have completed these I start adding extra language support. letting everything evolve from there on out into the other languages such as Cyrillic or Greek. Doing it in this fashion I find myself having the best change of doing a decent job designing characters I am not familiar with the right way and in line with the design parameters.
This time I starten designing the Cyrillic alphabet first, trying not to think about the Latin set design at all. I did this in an attempt to have a neutral mindset that wasn't influenced in doing it a certain way.
And I must admit, this was the best and most comfi time I ever did a Cyrillic set. I experienced a sense of having a lot more freedom for creative output.
The result became this cool looking "hell knows" what kind of style letterforms. I have no clue if I actually did a decent and accurate job at the Cyrillic set, and I'm not sure where to go from here on out either.
I hope you like it so far
Cheers
MIKITA - A "Chrome Script" style font based on the "Makita" logo type.
It is a simple 'semi' connected script, with only the basic character set. I don't feel like this requires having tons of typographic features. It is just aimed at writing simple things in this script style.
I hope you like it nonetheless
Cheers
See
This is a cloneWhat’s your favorite letter?
INNERCITY — Geometric future retro display grotesque
════════════════════════════════════
Geometric unicase display sans with a stylistic filled counter-like (Uc) set and monolinear 'bare-boned' geometric grotesque (Lc) set.
— Full alphanumeric dual-variant font !!
════════════════════════════════════
Elmoyenique's "zenzura" (a very stylish work in it's own right, make sure to check that one as well) anyway,
His 'zenzura' font kind of struck me with a healthy fresh dose of motivation. In the past I've explored somewhat similar style designs, but none of those ever really got consolidated into the extensive and complete work Elmo delivered with his stunning zenzura.
So I decided to dig up one of my older such projects and see if this new motivational boost could turn 'half'-a-font into a complete piece.
Long story short, this update is the result of that venture.
════════════════════════════════════
Where previously this project came in just one style (filled counters), with no additional glyph alternates. Basically a complete absense of the lowercase-string all together, and only very limited complementary set of symbols and punctuation marks were present. Neither did the previous version had a great deal of refinement in terms of metrics / kerning and overall horizontal distribution of type-set material. So, it was nothing more than a plain doodle of the idea I had back then, that had to be preserved for a later stage.
But being drawn into more recent projects at the time I eventually ren dry on motivation to fully finalize this I ended up publishing it in its rough state.
════════════════════════════════════
ABOUT THE UPDATE:
The'bare-boned' lowercase is a somewhat futuristic geometric looking form, whereas the filled uppercase set has a strong retro vibe.
Combined in 'mixed-case' it can make a cool optional decorative style capitalization for your text. Used in isolation the two styles (Uc, Lc) both could be used as two seporate fonts, allowing stylistic text hierarchy.
In addition to the stylish retro-like, and partially filled forms I included a glyph-alternative set that strips the letterforms down to their monolinear core-geometric essence.
The design of this set is characterized by the spacious, sharp and clear appearance, that looks slightly futuristic but fashionable still.
With this new addition being the more legible and clean form of the two style sets, I placed this variation into the lowercase-string, making this the default-style for the font.
For the numerals, symbols and punctuations, I tried to remain committed to the stylish filled nature of the uppercase set.
A full alternative monolinear and 'bare-boned' numeral counterpart is located in the 'Full Width' Unicode block. Two extra weight variations for the brackets are also included for a more precise personal preference..
— And so it finally could respectably considered being a full font after all.
Thats all folks.. Enjoy !
cheers
This is a cloneSTF_NEUE ISAIAH - 70's Art Deco / Streamline style typeface
══════════════════════════════════
Most of the design credits for this font should go toIsaiah Garciasince I took the liberty of revisiting her fontstructionFS Idea
Please check out this member's awesome contributions here:Ivy Meadows (Isaiah Garcia)
══════════════════════════════════
[THE PROCESS]
The one major difference between the two works is the grid size and construction method, Isaiah's version was made using a faux-Bézier approach (very labour intensive) and requires a fairly large design grid, whereas my version is a small grid design, utilizing the circle arc bricks and composites to achieve smoother contour quality, and was done on just a 4x7 grid using 2:2 filter.
This different approach and limitations in small grid designs have led to a number of small changes for certain glyphs. Also have I change some details slightly to my personal preference. But it remains very much Isaiah's design.
══════════════════════════════════
[THE FONT]
I tried to remain as faithful to the original font as possible, and in addition tried to further expand the character set. Most important differences made in my revision are the additional lowercase chatacter set (spurred strokes), the uppercase alternative forms / lowercase alternative forms (spurless) and extra symbols.
Enjoy!
This is a cloneOpening day of Marvel's "The Marvels" movie! Couldn't resist making a chibi version of Goose, the Flerken from the original Captain Marvel film. #StrongestAvenger
This allcaps font is meant to be used starting with a Capital letter, then lowercase letters following it. But no one will listen, will they?
This is a cloneGr4ftY presents:
Foundry DS
inspired by frodo7's most recent work, this is the result of me trying it for myself. Still, this is far from perfect, and any help would be greatly appreciated.
THIS MAY BE EXPANDED APON IN THE FUTURE.
Gildor: A high elf from Tolkien's The Lord of the Rings. He met Frodo, Pippin, Merry, and Sam on their journey to Rivendell. Gildor Grotesk: I considered the alliteration.
Gr4ftY presents:
Bolden
Just a simple bold font.
feel free to give critique, as long as you have something helpful to say.
i would especially appriciate help with the greek.
thanks:
to @Kiên Trung for helping with the Υ
to @elmoyenique for helping with the y
to @Sed4tives for a bunch of bits and bobs here and there (c, t, and n, to name a few)
additional info:
X height: 5
Cap height: 8
letter width: 5
Filters: 2x2
VOLLE BUISJES — Geometric sans-serif style
═══════════════════════════════════
[ INTRODUCTION ]
This font had derived and materialized from my previous FontStruction called Buisjes, and had innitially been planned to be made into this “solid”-style instance that would've then were to be combined and included to the original master font. That idea was later canceled when I decided not to make this part of the “Buisjes”-typeface.
I still went on completed it though, but I was now simply treating it as this unrelated new font instead.
The original “outlined”-variant still stood testimony in this second stage of development, as it served as the global basic backbone for this. But, since it now no longer was bound by accurate representation I could start utilize more dynamic sculpting techniques and make minute adjustments that incnclude some optical corrections, as well as implementing a slight more polished looking geometry.
[ TECHNICAL BACKGROUND ]
I took a clone from “Buisjes” and started modifing it into this new solid style. What I basically did was utilizing the “brick swap”-method in the FS-editor to replace every brick inside the font's “My Bricks”-palette. By doing so, essentially converting the font one-brick-at-a-time into this 1 : 1 conversion of its source without making any additional changes to the actual glyph-contours.
After a while due to some undesirable result that came from replacing the original bricks the design took a different turn when I started realizing that making an exact 1 : 1 conversion into this solid style wouldn't generate the most desirable looking font. This new solid version that was rendered from the “brick swap”-process seemed to have several optical complications, that when compared to the original outline version, had quite the different effect on its physical properties as well as the aesthetic quality of the letterforms, and had far less visual appeal. These newly presented optical misfortune also had a direct negative effect on the font's legibility. In oder to gain a better understanding as to why it took a toll on legibility some additional thing needs to be explained first, to make sense of it all later. This explains in short the visual effect of added contrast that comes from that “bi-linear”-characteristic nature of the outline version, which employs so much more emphasis to the font's overall geometric properties of various form, and therefor to the contour shape of a glyph. In return this has a direct impact on the overall effectiveness of these forms.
The reduction of this additional contrast within the font's “positive vs. negative”-whitespace balance for the solid version results in a letterform that has a rather weak representation of its several typographic components as well as for each of the individual letter-parts that form a whole, which also help to distinguish one letter from another. In simple words this means that a solid style lacks a lot of that emphasis that is present in the the original outline version, and makes for a far less pleasant and effective font.
Another issue I had with the 1 : 1 identical conversion was the unanticipated but pretty drastic deterioration of its initial “wow”-factor in the solid version that was generated. No longer beneficiary from additional added value that came with a more “decorative”-characteristic that is present within a outlined glyph contour. Also the “bi-linear”-nature of the outlined letters sort of gave the impression it was putting double the emphasis to the typographic parts and the geometric properties that make up each letterform. The rather squarish “box”-like characteristics of the lettering became much more evident in the solid glyph face. Shifting visual focus from the previously more ornate display attraction away towards this more “mechanical”-style that is this rather plain and somewhat shallow looking flat faced letter.
All of these were things that worked out just fine in the font's outlined version, but not so much in terms of a solid “filled”-like style.
Here are some of the things that cause trouble within an exact 1 : 1 conversion into solid bricks:
• Enclosed typographic elements render much thicker than what is considered “acceptable”
(requires optical correction)
• Diacritics render too thick and often too big
(requires a complete re-design)
• Radius of FontStruct's default solid circle arc connection brick is too small
‣ Making a solid font constructed from these to look compressed
‣ Arc intersection point not sitting deep enough
• Reduced emphasis in depth of geometric form
‣ Simple rather “feature-less” and “squarish”-looking geometry
(both requires numerous custom composite bricks in order to break-away from these constraints)
— The combination of the above in terms of the appropriate adjustments required to make optical corrections in order for it to have balanced proportions will have such significant impact to certain aspects of the physical presentation of the letterforms that they no longer share that seamless overlapping cohesion, and it couldn't really classify any longer as being this solid / filled style instance to the original master font.
That wasn't all (LOL) but yeah I'm done typing for now!
Hope you like it, more info follows..
Cheers
This is a clone of STF_BUISJESVersion 1.3: Added Polish.
*
This font used to be a normal Decolike... until someone decided to chow down on it! They seemed to prefer the taste of spurs, as all of them have been bitten off, leaving only semicircular impressions.
"Nervousa" is an anagram for "Ravenous".
Unicase font. You can find alternates to "A" & "E" at the lowercase "a" & "e" (and their accents, of course), an additional design for the "Q" at the "q" and a "c" typing the "¢" sign. This font is directly inspired on Nickel created by the cool typographer David Jonathan Ross from DJR Foundry. Why? I don't know if this will happen to any of you, but me, when I stop to look at a font that I like, I find myself evaluating how the author has solved the usual "design problems". There are times when I agree with the chosen solutions (the most), but there are others when I think I would do it differently. This is the case. I wanted to modify a bit the general appearance of some glyphs of the font, especially characters like C, E, F, G, M, Q, R, S, X, Z and more, or the numbers and some secondary others. The differences were extensives and are more or less subtle in each of the complete set... And here you are the final result, I hope you like it. I've learned a lot during this experience, and FontStruct has been shown to be a very valid tool to work at this level. Thanks for read my little explanation and enjoy with this work, please.
Happy Hollydays! Inspired by elmoyenique's colours
It's called ajicis because it is built upon the letters done for the wallpaper of Wipeout 3 game team AG Sys. It has the same grid structure but the letters look nothing like the original.
Also, this FS'tion was started on the phone (because I was too lazy to get off the bed and go to the computer). When I saw potential in the created letters, it was saved and opened on the iPad. The rest of the fs was done there. The only thing that couldn't be done on the iPad was adjusting of a composite brick. (It was fixed on the laptop days later.) So, 98% iPad.
@RobMeek: The iPad version worked well. However, Menu->Edit->Copy, Menu->Edit->Paste, etc. got tedious. Can we have the menu commands in icon form docked or floating somewhere on (in?) the tablet version? The icons can be half the size of the Tools icons to save space. Also, can the tools and zoom be docked as well on the tablet version? It would be helpful. Thanks.
This is a clone of tm ajicis originalPHOTONIA (Pro) - 70s future retro style
═══════════════════════════════════
70s style reverse contrast sans with future retro aesthetics, perfect for projects with a vintage sci-fi, space age or computer theme.
This is actually a refurbished and extended version of an older FontStruction I did back in 2019. The original PHOTONIA was a cool looking little work, but didn't quite made the most of its design concept. Inexperience and poor design decisions had led to inconsistencies and other flaws throughout the font. Besides those it also had a small character set that mostly consisted out of the basic Latin block and bare essential symbols & punctuation marks. But imo it still had quite an interresting retro vibe and the potential to be more. So I decided to give the old project some well deserved refreshments.
First I started eliminating the inconsistencies that were present in the older work, than I continued polishing and re-design / modify several characters hoping to create a greater overall unity to the entire piece. Once I was fully satisfied with this renewed improvements it was time to build and expand the character set towards a more complete lingual and typographic support.
➜ ⚠ Previous Version:
▶ Basic Latin only
▶ Minimal kerning
➜ ⚠ What's New Inside:
▶ Additional Latin and accented Latin
▶ Diacritics
▶ Many glyph alternative forms
▶ Additional symbols and punctuation marks
▶ Horizontal box drawing (page deviders)
▶ Typographical symbols
▶ Ornamental printer's characters
▶ 1680 stored kerning pairs
Cheers
This is a clone