INNERCITY — Geometric future retro display grotesque
Geometric unicase display sans with a stylistic filled counter-like (Uc) set and monolinear 'bare-boned' geometric grotesque (Lc) set.
— Full alphanumeric dual-variant font !!
Elmoyenique's "zenzura" (a very stylish work in it's own right, make sure to check that one as well) anyway,
His 'zenzura' font kind of struck me with a healthy fresh dose of motivation. In the past I've explored somewhat similar style designs, but none of those ever really got consolidated into the extensive and complete work Elmo delivered with his stunning zenzura.
So I decided to dig up one of my older such projects and see if this new motivational boost could turn 'half'-a-font into a complete piece.
Long story short, this update is the result of that venture.
Where previously this project came in just one style (filled counters), with no additional glyph alternates. Basically a complete absense of the lowercase-string all together, and only very limited complementary set of symbols and punctuation marks were present. Neither did the previous version had a great deal of refinement in terms of metrics / kerning and overall horizontal distribution of type-set material. So, it was nothing more than a plain doodle of the idea I had back then, that had to be preserved for a later stage.
But being drawn into more recent projects at the time I eventually ren dry on motivation to fully finalize this I ended up publishing it in its rough state.
ABOUT THE UPDATE:
The'bare-boned' lowercase is a somewhat futuristic geometric looking form, whereas the filled uppercase set has a strong retro vibe.
Combined in 'mixed-case' it can make a cool optional decorative style capitalization for your text. Used in isolation the two styles (Uc, Lc) both could be used as two seporate fonts, allowing stylistic text hierarchy.
In addition to the stylish retro-like, and partially filled forms I included a glyph-alternative set that strips the letterforms down to their monolinear core-geometric essence.
The design of this set is characterized by the spacious, sharp and clear appearance, that looks slightly futuristic but fashionable still.
With this new addition being the more legible and clean form of the two style sets, I placed this variation into the lowercase-string, making this the default-style for the font.
For the numerals, symbols and punctuations, I tried to remain committed to the stylish filled nature of the uppercase set.
A full alternative monolinear and 'bare-boned' numeral counterpart is located in the 'Full Width' Unicode block. Two extra weight variations for the brackets are also included for a more precise personal preference..
— And so it finally could respectably considered being a full font after all.
Thats all folks.. Enjoy !
cheersThis is a clone
This font is based off of the really kind of messy handwriting that teenagers have. I made this font through a phone and adjusted the block with and height so it is easier for the strokes to be continuous.
No copy paste used.
Another optical experiment, testing border areas. Sorry if sometimes it's a bit hard to read and it shakes your vision, but that was the idea. It has only been possible using the colour options available to FontStruct Patrons. Thanks once again to Big Rob Meek. PS: "2 in 1 font", the black version of the SVG file also can works like an usual B/W font.
BOUWHUIS - 'Bauhaus'-modernism inspired minimalist geometric sans
I am in a Bauhaus-vibe last couple of day..
So here is yet another venture into the modernist minimalism aesthetics of the previous century.
This Font losely draws on the basic concept for the 'Universal Type' that was originally designed by Bauhaus student Herbert Bayer.
It's basically a hugely inspired tribute to Herbert Bayer's several forms of ―'Universal'.
But I want to be clear on the fact that this isn't a revival of the original alphabet or anything along those lines for that matter.
Instead it is a intermingling personal interpretation of his multiple works and ideas. Attempting to merge this recollection of Bayer's rational 'functionalist'-approach towards combining aesthetics and function, as by which he is answering to the 'Bauhaus'-philosophy and the 'Form follows function'― design principle.
But besides being a 'inspired' recollection, still the main focus for this FontStruction was to come up with this personalized and stylistic derivative version that pays homage to various of his original work. Unifying the various characteristic Bayer idea's-n-bits within my personal visual representation of the general concept into a new piece.
For it's primary style-concept I envisioned BOUWHUIS being something fresh and somewhat different from the gross majority of similar inspired works out there. This led to the decision for going with a more contemporary and modernized (― as oposed to modernist) style lettering.
In addition to that I pursued a much more vibrant and nuanced typographers sensitivity towards letterform calligraphy and decorative features.
Strong geometric core elements of the font make up for a expressive simplistic structural basic form and it has 'zero' stroke modulation for thickness.
It's regular weight combined with that predominant circular and square-based geometry of the letterforms result in this 'open', and overall ventilated characteristic of the design.
The typical crude appearance that usually comes with a strong geometric sans like this was compensated for in BOUWHUIS by the design's subtle deviations in form and the various decorative calligraphic letter-components.
Something that completely denied Bayer's principle in approach to modern typography and to create an "idealist typeface" was; The reintroduction of it's uppercase letters.
Part of Bayer's rationale was to simplify typesetting, strip all that he felt was unnecessary or the typeface had no need for in order to function, till there was not much more left than just the nearly bare-naked form.
It seems that unintentionally some innuendo of Art-Deco―flavoured hints also found their way into parts of this design.... ―Hmmmz
― but I think I like them, so no worries on behalf of that
As a little bonus topping it all off there is also a super tiny experimental lowercase caracter-set (X-Height=1 grid unit)
Located in the Unicode block for "Halfwidth and fullwidth forms"
I hope y'all like it so far, more will follow soon.
EPOCH - Modern light-weight geometric display sans
───── 「 MEASURES 」
(in grid units)
Optical Corrections: None
Stroke: １／８ ｔｈ
4－Ｅｍ ／ ０.１２５ : １－Ｓｔｒｏｋｅ （０.１２５ ≍ １／８ ｔｈ）
― No filters used.
───── 「 SUMMARY 」
This is yet another deep dive into the very small and tiny quantum realm of FontStruct's small grid and light-weight stokes.
Unlike some of my previous endeavours into this dark corner of the FS-editor, which could have dizzying complexity in forms, this project for once didn't stress the sh....*t out of me by stretching the limits for my capabilities beyond what is still comfortable this time. Nor did it drain every last frigging bit of my knowledge or clever creative insight to pull it off.
On the contrary,
For once it remained largely a pretty straight forward and easy project in terms of forms and geometry. The absence for most of the 'bar-raising' features such as diagonal forms, rounded, transitions or stroke modulation made this 'FontStruction' that much more easy.
And when metaphorically breaking it down to the bare naked form and necessities, this design mainly consist of FS's (default)-brick set, resized modifications of those, combined with a set of stacked composites.
There a still a number of things I'd rather seen differently, and will see later attempts at making improvement, but taken in a broad perspective most of the included material so far look pretty fine to me already. And to point out one of the things that is still bugging actually are the 'accented' letters.
Some glyphs have odd values for their 'character'-width, and this makes it impossible to achieve 'grid to em-square'-bounding box allignement in FS's editor. So accents in these asymmetrical values look slightly ofset.
― "Changing character widths to nearest even value is simply far too destructive to the stylish characteristics of the fonts appearance"
───── 「 ABOUT THE FONT 」
In the end it became a pretty cool looking light-weight geometric modernist sans-serif style that at the same time has strong hints of Art-Deco-style lettering as well.
And apart from the minor things it fell short with, I think there is a lot about its overall character-set design and forms that is looking pretty darn rad actually if you ask me.
Content-wise the font is a single case design in a 'all-caps' or Majuscule style. The (Lc)-string was kept empty for deliberately for the technical reason of preserving all the (default)-blank metrics data for any further design updates.
───── 「 WHATS INSIDE 」
A little bit of everything...
■ Body text formatting:
□ Basic-Latin based character set with accented letters & numerals
□ Most punctuation marks
□ Numerous symbols
■ Decorative formatting
□ Pictorial attributes
□ Repeating patterns
───── 「 THE END 」
Let me know what you think so far,
Put a smile on your night. A happy Halloween to everybody! PS: Take a look to the lowercase, please, Someone is waiting for you...
An unofficial demake of Monaco Regular at 9 point.
Monaco is only available as a pre-installed font on Apple computers.
This font currently contains the FontStruct Basic Latin character set (ASCII + curly quotes). If it gets 100 downloads, I’ll add OpenType Std (Windows ANSI + Mac OS Roman) characters.
My take on a thin sans.
It should cover all Western European languages (plus Hawaiian and Hepburn romanisation).
First pass at light kerning done, will be refined with use.
STF_ELEGANZA (Therapy) ―Contemporary geometric humanist sans
A font style, that while simplified by old tradition, saw new light by modern sophistication.
It comes in a solid medium weight that is very suitable for body style text with good readability, but it does perfect clean headlines or ads as well.
The goal was to make a clean but somewhat more contemporary and playful take on a 'Grotesque' sans-style.
In an attempt to break away from the traditional trend of Grotesque type designs which evolved more around pure geometric shapes and aim for perfect circular, triangular or square shaped letterforms, that in return give many of them a somewhat harsch and featureless mechanical appearance, I choose to try and achieve the opposite, aiming for a softer, friendlier and more humanized feeling instead.
Dimensions: (in grid units)
X-Height: 1 .625
Cap-Height: 1 .875
Em: 3 .5
Brick Size filter: 2 : 2
This is the 'Therapy'-style in the 'ELEGANZA' typeface family. This version basically aims for the exact opposite effect than what the Tight' version did. The name 'Therapy' relates to its 'opened-up' appearence and the overall de-stressed propperties of this version. The more relaxed and spacious distribution remotely resembles the characteristic feel of a typewriter face. But the main purpose for this version is to create visual hierarchy in your layout.
The other style variations can be found here:
I hope you like it...This is a clone of STF_ELEGANZA (Tight)
This font is a not too curious case. It comes after trying to prove to myself (with a high percentage of satisfaction, but not quite yet) that FS can allow me to create pro-looking fonts. I am thinking, for example, of zerena, zchreibengroß, zimmera, zenando, zenantoo, zanze, zinckel and others like that. Every time I finish a font that has taken me a long time to complete, I feel the need to look back and do something more relaxed and simple. Thus, without any pretense but feeling fun and friendly, zikiya was born. Hope you like it.
Prajna is a Sanskrit word meaning wisdom, understanding, insight. Simple on the outside, with some depth on the inside. Looks like it could be 1:1 bricks, but it actually uses a 1.5 sized brick width, giving it additional curvature that wouldn't be possible on a 1:1 scale.
I was supposed to release this a year ago, synchronous to the Peace 2.0 sculpture that was publicly unveiled which utilized Prajna to spell out "Peace" in 12 different languages. I like to think that since the sculpture was written with Prajna, it has a literal connection with wisdom, understanding and insight. I release it now with the hope that you may write with Prajna of your own.
Based on a font identification request over at Typography.guru.
Only |J|Q|Z| are done from scratch, but most letters still needed some interpretation in order to choose what to keep as a detail and what to discard as just an artefact.
As per the samples available, it's just uppercase (plus the lonely lowercase |c|).
It is possible that the original wasn't a pixel font after all, or that the pixels weren't square, and probably it had a higher resolution than 13×13.
Based on an old glyph by the magnificent and always amazing Master geneus1. Caps only. You can find an extra A at the "a" glyph and a little C placed at the "®". See also the grey version.This is a clone of zalida 3D eYe/FS
Based on an old glyph by the magnificent and always amazing Master geneus1. Caps only. You can find an extra A at the "a" glyph and a little C placed at the "®". See also the colour version.This is a clone
ALIEN WORMHOLE (BOLD) - Monolinear Sci-Fi-inspired 'worm' typeface.
This is a 'Bold' style version to the "ALIEN WORMHOLE" type family.
This version has a ton of extra character compared to the 'Light' version.
For now only the two 'Basic Latin' sets, some symbols and a small number of puctuation marks match. And it remains to be seen if I can translate back to the Light version all those extra's that were put into this Bold version.
I mentioned 'type family' earlier, but in reality there isn't a whole lot of family just yet. Since the two for now hardly correlate truly.
Here is a link to the 'Light' version
Stay tuned for future updates.
This is zimmera without scratches, more usable for general purposes. Thanks to @frongile for encouraging me to add it here. Hope you like it.This is a clone of zimmera eYe/FS