Asymmetrical alien techno stencil.
This uses some experimental techniques, of course, but I'm not sure how to concisely explain those. Let's just say that each type of line bend and line connection has a rule associated with it. These get naturally modified by the structural asymmetry the font has so that simple rules appear in many forms and variations.
V0.2.6: Finished Cyrillic.
*
A small scale faux-bezier design with a cutout-esque look. It offers different advantages at different sizes. Most glyphs are legible down to 4pt.
As this design evolves, it gives me an increasing "board games" feeling. This design seems very well-suited for board game parts, especially cards and smaller plastic pieces.
*
This has a few notable design features:
- Asymmetry helps keep letters like bdpq from being confused for one another
- Serifs and flags accomplish the same thing for groups of similar letters such as ce and ftſ
- Semiserif style helps reduce the need for kerning to almost zero
- Simplified polygons and counter shapes help pixel optimization
*
See also:Cartoon Riot
A quirky Pseudostencil design with a central horizontal slot going through it. The "slot" is 1 brick tall for lowercase and 2 for uppercase, and becomes a vertical slot for numerals and certain symbols.
This is named for the cowboy and lasagna emojis. These were repeatedly added to then removed from several popular chat clients and websites. Changing emoji standardization or government conspiracy? YOU DECIDE.
An alternate, more asymmetrical & stylized Madmouse.
This could be considered an avantgarde spurless or mixed-spur design. Some letters have spurs and some don't. This is entirely dependent on the diagonal lines, which were placed so that they would slant up and to the right. "s27" are obvious exceptions.
This is a clone of MadmouseLinestrider's two-lined little brother.
*
Probably won't update this one again, because it uses a lot of brickswapping and so it is likely to get corrupted by additional editing/saving.
This is a clone of LinestriderA design that combines decolike asymmetry with a double line concept. It also incorporates some experimental methods to unify the wider glyphs (mw@#™, etc.) with the others, by allowing the middle sections of these letters to have both the single and double lines. This results in a look that is at times architectural and at other times almost like loopy cursive.
A continuation of Tangereen. This version took a lot of figuring out and a lot of changes, both aesthetic and structural. I managed to make it different from other double-line designs like Glitzfang and Junglira while still keeping it simple and cute.
This is used in FS Tutorials, FS Idea Soup, FS Obscura, and most recently, AMFA's 3D printed parts.
This is a clone of TangereenI finally made a folded-/ribbon-style design. This one contains a number of experimental techniques. Most notably, the swept parts of glyphs are allowed to extend beyond the letterwidths and sometimes even the baselines. This enhances the sense of movement, creates some interesting linkages, and reduces the need for kerning.
All of these shapes can be constructed with paper or ribbon, although lots of clever folding tricks, doubling, and pinning down/securing with glue would be required.
Alternate tilde on "±".
The new Eyeball Kids™ from Pixel Kitchen® are the best way to get your child interested in experimenting with eyeballs. Color 'em! Italicize 'em! Throw 'em into oncoming traffic! Abuse 'em all you want because EYEBALL KIDS ARE ETERNAL.*
! ! ! DO NOT FEED EYEBALL KIDS AFTER MIDNIGHT ! ! !
* - Eternal under normal use conditions. See the enclosed manual for terms.
Paradoxy Effect, now with more dots.
This is a clone of Paradoxy EffectI use multiple text editors, and made this font to be an alternate font for Windows Notepad.
This was designed to be similar to Marengi Mk2, the font used in my FS Tutorials. Apart from using a smaller grid size, Eglantine achieves a closer line spacing through the use of short ascenders/descenders and the removal of the dots from i and j. It is also more condensed and optimized for speedreading, resulting in a font that is pleasant to read despite being quite small.
This design does have some wasted matrix, but this is necessary to achieve the desired effect. The global matrix is still only 7px tall, so this can still be used on most small canvasses.
*
Original Size: 4.5pt
The Unicode bitmap font from Minecraft, also known as GNU Unifont. The game has a font priority system called "providers" that looks for bitmap data for a specific character in the non-Latin European character set first, then in the accented Latin character set, then in the game's low-res default font, then finally here, in the high-res Unicode character set. You can override this priority system by going into Options... > Language..., then setting "Force Unicode Font" to ON.
The game stores this font in images containing 16 rows and 16 columns of characters. Each character is 16 pixels wide and 16 pixels tall, totalling 256 characters per image. Each image represents one Unicode codepage, and there are 256 pages, which covers characters U+0000 to U+FFFF. Control characters and most CJK characters are omitted here, because FontStruct doesn't officially support them.
The font is not monospace, however, so the effective widths of each character are stored in a separate file called glyph_sizes.bin. Information for each character is stored in one byte, and the upper and lower 4 bits of this byte represent the start column and end column with a number ranging from 0 to 15, where 0 is the leftmost column of the character's allotted 16x16 space, and 15 is the rightmost column, respectively.
Knowing all of this allowed me to automate most of the steps involved in creating this recreation. I did not use the FontStructor to make this, I instead used a program to directly interact with FontStruct's API. It is possible to add unsupported characters to a font with this method, but I chose to stay within the limits of what is officially supported.
Here we have a filled-counter pseudoserif pseudostencil that is also a borderline IVO design at the same time! It also has a bit of a "double font" look going on if you look at the negative space.
*
Design Rules:
1. Internal negative spaces of glyphs will be filled such that a 0.5-brick-wide void exists between the filled space and the glyphs themselves.
2. When a glyph's horizontal line intersects with the filled space created by Rule 1, both the filled space and the line will be broken.
3. Vertical lines will only connect by two tapering curves or by the implied connections created by filled negative space.
4. Filled negative spaces may only join with the outer perimeters of glyphs.
A design that combines tropes from fantasy, sci-fi, and sports in a subtle and pixel-optimized way.
Structurally, this looks like a high-res version of Marengi Mk2. There are still plenty of differences between the two, but since they seem equally readable to me, I'm tagging this as a chat font.
Semiserif semispur minimalism.
*
This design uses a few novel glyph-shapes and techniques to achieve its look. Most notable of these is the serifed a which lets the serif protrude to the right. I avoid this feature in almost all designs, especially pixel fonts, because it adds an unnecessary 1px of spacing - but for this font, the feature can be included without changing anything for the worse. Many other glyphs have this same sort of protruding serif/spur, and the slanted geometry of the serifs/spurs affords them a look that "retreats" from neighboring glyphs, rather than seeming to protrude into them.
Version 1.5: All permutations of E and F were refined and improved.
*
A modernized, rounded, and truncated version of Marengi. This is made to be a good text editor/chat font. It has very few kerning pairs, so it should render fine in any software.
Ascenders are only allowed to be as tall as the uppercase/numerals, while descenders are allowed to go 2px below the line. This creates a natural line spacing that is readable and not too dense. (Diacritics break this rule, of course... darn them...)
Gone are the curved descenders/termini on letters like gjty. The simpler geometry makes this design more suited to speedreading than its predecessor. In fact, altering those four letters alone improves speedreading on this font by up to 14%!
*
09JUN2019: I have been using this as my main IRC/chat font for some time now. Of all my chatfont designs, this has proven the easiest to read and use.
*
MIV: 8.31
Original size: 6pt (use multiples of this size for pixel perfection)
The final Laconica?
This idea emerged while making Laconica Skeleton, so I decided to carry it out. The design reminds me of blueprints and floor plans, thus the name.
This is a clone of Laconica SkeletonAn alternate take on Eyeball Kids which has more expressive eyes.
*
Making this has given me an idea for an ASCII Roguelike tileset wherein lowercase letters represent juvenile creatures and uppercase letters represent adult ones.
This is a clone of Eyeball KidsAn experimental design using 1/8 weight lines alongside 1/16 ones. The 1/8 lines are the smallest that can be accurately nudged. Centering them is still a problem at times, and I need a few impossible composites to perfect the glyphs ABEFHKQRXYijkx34789, but overall I'm quite fond of how this doodle turned out.
I think I could use some intensive compositing to get rid of the central dividing line in glyphs like A and H. I'll give it a try when I can.
Formerly known as "Specula".
*
By request, a font with the two-toned look of a Pokéball. No filters! The Pokédollar sign can be found on "¢" and a Pokéball is on "•".
"Eviolite" is an item that powers up the defenses of Pokémon that are not fully evolved. Looks like a lavender-colored gem.
Font from the ingame marquee display of Barcade Brawl, a 2015 game by yours truly. This was made to look similar to the system fonts from old arcade boards, PC microsystems, etc. You've probably seen the fonts I'm talking about; they're everywhere and many people refer to them singularly as "the arcade font" or "the NES font".
This is 7x7 with no wasted matrix, but it looks better without monospacing since not every glyph is the same width. It also makes a decent terminal & chat font, at least for those who don't care about the case of the messages they read and write.
Feel free to use this in your games, etc.!
*
Original size: 5.25pt (use multiples of this size for pixel perfection)