Searching for more “Display” fonts?
Buy and download “Display” fonts at MyFonts.
Такой агрессивный футуристический стиль стал считаться геймерским. И теперь представьте, что он ещё и светится!
Such an aggressive futuristic style has become considered gaming style. And now imagine that it also glows!
Perhaps this is the limit of my capabilities.
See more:
https://fontstruct.com/fontstructions/show/155561/fs_penmanship
https://fontstruct.com/fontstructions/show/1501135/lazzaro-1
https://fontstruct.com/fontstructions/show/1598518/cryostasis-vempire
https://fontstruct.com/fontstructions/show/1747945/stepforward-1
https://fontstruct.com/fontstructions/show/1735833/logic-16
https://fontstruct.com/fontstructions/show/408191/telamon
https://fontstruct.com/fontstructions/show/477501/largo
https://www.fontstruct.com/fontstructions/show/1334057/bb-corners
A FUTURISTIC LETTER “A”!!
MY FUNNY LETTER “K”!!
AN OVER-EXTENDED EM DASH!!
WEIRD UPSIDE-DOWN CYRILLIC LETTERS THAT NOBODY’S HEARD OF!!
IT’S ALL HERE IN MY NEW FONT — ALDRON.
I THOUGHT THAT THIS FONT NEEDED MORE ATTENTION THAN THE ONE THAT I CLONED IT FROM, WHICH WAS MADE IN A COUPLE OF HOURS. AS WELL AS ADDING THE LATIN AND GREEK ALPHABETS, I MADE A FEW ADDITIONS AND ADJUSTMENTS TO THE CYRILLIC LETTERS AS WELL AS SPACING. AND UNLIKE ITS PREDECESSOR, THIS ONE IS KERNED.
IT WAS QUITE A DIFFERENT EXPERIENCE, ACTUALLY, ADAPTING A CYRILLIC FONT FOR LATIN INSTEAD OF VICE VERSA.
INTENDED LANGUAGE SUPPORT
• БЕЛАРУСКАЯ МОВА — BELARUSIAN
• БЪЛГАРСКИ — BULGARIAN
• HRVATSKI — CROATIAN
• ČEŠTINA — CZECH
• ENGLISH
• ESPERANTO
• DEUTSCH — GERMAN
• ΕΛΛΗΝΙΚΆ — GREEK
• ITALIANO — ITALIAN
• ҚАЗАҚША — CYRILLIC KAZAKH
• МАКЕДОНСКИ — MACEDONIAN
• TE REO MĀORI
• ROMÂNĂ — ROMANIAN
• РУССКИЙ — RUSSIAN
• SRPSKI, СРПСКИ — LATIN AND CYRILLIC SERBIAN
• SLOVENČINA — SLOVAK
• SLOVENŠČINA — SLOVENIAN
• УКРАЇНСЬКА — UKRAINIAN
AVAILABLE CHARACTERS (★✰*ALL KERNED YAY!!!!!✰*✪)
LATIN: ABCDEFGHIJKLMNOPQRSTUVWXYZ ĀÁÂÄĂĆČĈĎĐDŽĒÉÈǴĜĤĪÍÎĴĹĽLJŃŇNJŌÓÒÔÖŔŘŚŠŜȘẞŤȚŪÚÜŬŮÝŹŽ
GREEK: ΑΒΓΔΕΖΗΘΙΚΛΜΝΞΟΠΡΣΤΥΦΧΨΩ ΆΈΉΊΪΌΎΫΏ
CYRILLIC: АБВГДЕЁЖЗИЙКЛМНОПРСТУФХЦЧШЩЪЫЬЭЮЯ ӘЀЃҐҒЂЄЅЍІЇЈЌҚЉҢЊӨЋЎҮҰҺЏ
THE NUMBERBET: 0123456789
PUNCTUATION: ()[]!?.…:;,„“”‘’-—«»*• AND OF COURSE, SPACE
Made for FontStruct's Future Competition. This display typeface was designed with a little influence from stencil, this font has rounded corners intermixed with angular corners, and gaps in unusual places. It also uses the “two-storey” lowercase g, which was a challenge to fit cohesively within the restrictions I gave myself.
ASCII + Cyrillic.
Three in a row: after one lycanthropic font, another to the zombies... the third is for the scifi... and FS!.
Mjölnir slab serif novelty display font Copyright 2020 Doug Peters of Symbiotic Design, all rights reserved worldwide, including artistic and creative rights. Version 1.005
Mjölnir is the name of Thor's hammer (God of War), hence, I tried to make the letters resemble some sort of new fangled hammer.
This is a clone of TRE45ON_FSAll cap bold serif
kerned : Russian, Latin Basic, More Latin
I can't even type cyrillic extended, there are too many letters in latin extended, I don't have greek keyboard either
I wish I could make everything, but I'm a human after all (or am I?), I decided that this is good enough
this font was created for the logo of my discord server, "DOLPHIN." it was actually my first fontstruction, but has undergone some revisions and is now being released publically. it is heavily inspired by the font "FUTU" by emil bertell.
CLICK ON THE “PIXEL” BUTTON TO MAKE IT LOOK, LIKE, A BAJILLION TIMES BETTER.
INTENDED LANGUAGE SUPPORT
• ENGLISH
• MĀORI
• SLOVENIAN
• RUSSIAN
THINGS THAT FONTSTRUCT NEEDS
• A DITHERING TOOL
• AN ELLIPSE TOOL
• RECTANGULAR- AND ELLIPTICAL-OUTLINE TOOLS.
• A BUCKET FILL TOOL
• RULERS
• A SKEWABLE GRID
• A MASS KERNING FEATURE (OR EVEN AUTOMATIC KERNING, THAT’D BE NICE)
• SUPPORT FOR MULTIPLE FAMILIES WITHIN ONE FILE
• A TERMINAL FOR PROGRAMMING ALGORITHMS TO AUTOMATE REPETITIVE, PREDICTABLE ASPECTS, AND A WAY TO REFERENCE THE GRID SQUARES AS AN ARRAY OF SOME KIND
DON’T THINK THAT I’M SHOUTING ABOUT THIS. I JUST DON’T LIKE LOWER-CASE LETTERS!
This is a clone of Some fonts you just can’t FontStructTYPE-O-NEG4TIVE ― Avant-Garde reverse-contrast inspired sans
═════════════════════════
Experimental endeavor into avant-garde, reversed-contrast inspired letterforms.
I will explain the font in more detail bellow in the comment section.
Cheers
THE MOMENT YOU STEP INTO SPOOK MANSION, YOU REALIZE YOU DONE GOOFED UP. THE DOOR SLAMS SHUT BEHIND YOU AS SCARY PIANO MUSIC BEGINS TO WASH OVER YOU AND TERRIFYING KICK DRUM SOUNDS BEGIN TO PUMMEL YOU. WITHIN MOMENTS, YOU ARE DROWNING IN A SEA OF EERIE AMBIENCE. "WOE BETIDE THE FOOL WHO CONSPIRES TO TAKE MY RICHES!", SHOUTS A GHOSTLY VOICE SOMEWHERE BEHIND YOU. YOU TURN, BUT NOTHING'S THERE. BOO! LOL....................................................
Version 0.5
*
A font made for a LuneKnight, a Terraria mod by yours truly. It gets its name because parts of it remind me of halberd, partisan, and/or axe heads. I designed this to have the vaguely authoritation look of a Didone as well as a borderline-gaudy look that prevents this from being taken too seriously. These changes lent some much-needed character to the prototypical Didone from which this design evolved. The uppercase letters are more heavily ornamented, as if to suggest that they are letters from an illuminated manuscript.
The main texture is a diamond pattern inspired by vent holes in medieval armor. These were often made with a square punch, and help the font look more handmade. Actually, most of the quirks this font possesses are present to help present a handmade look.
*
Notes
The wider letters are incised, which seems to lessen their perceived wideness by breaking up the shapes. For me this effect lent a more natural flow to the reading.
The ornamentation rules are complicated and factor in lettershapes, English letter frequency, and the existing design parameters. One thing I can concisely explain is that glyphs which normally look fairly plain are ornamented to such an extent that they make others look plain instead (CGJLT1 among others).
STF_BODIDONE - Classic Didone style display serif.
Ahh sadly due to repeatedly running into a corrupted font when I save newly made changes to it, it eventually catched up with me and tested the limit of my patience.
I have had to painstakingly restore the font 5 times already since I started it.
So I stopped including new characters as well as making new changes to its existing character set. (At least for now)
Too bad because I wouldve loved to see this truly getting finalized.
So at this stage there are still a number of characters that remain in rough condition, and had yet to be further optimized.
The main A-Z alphabet luckily already was close to how I invisioned it, but especially the numerals, symbols and accents still have some rough edges.
Now, forgetting all that, I still think it is not a bad font at all. Everything is there for most common Western-European languages, somewhat still making this a usable font that I shouldn't be keeping in private!
I hope that despite my bad luck this time, y'all still like it.
================================================
About this Font:
The idea was to make a classic Didone style display serif that is meant for making clean headline text similar to those often seen in older magazines or newspapers. I set out trying to design a semi-bold & slight expanded looking letterform with thin hairline serifs and strokes. I choose a large grid scale for the extra freedom in custom shaping this provides.
================================================
Technique I used in this design:
This font in particular I have experimented with working within a "(asymmetrical-) Grid Scale ratio" ( 1,5:1 ), so, changing only the value for the Horizontal grid scale. (This distorts the grid aspect ratio, and is a great way to discover and experiment with getting new forms and shapes).
The 1,5 : 1 ratio was specifically choosen to keep maths simple, in order to rebuild certain required bricks that build specific slope angles , such as a 45° (which is no longer possible to make from the FS default brick set when using asymmetric scale ratios, unless making composites).
But what this also does is opening up a totally new approach to making shapes, and..becoming quite a surprisingly easy shortcut to get unusual shapes or make variations on these, even with as little as just the rotation of the bricks/selection. (thanks to the distorted aspect ratio) :-).
This is a must try for those who are into large grid designs, fake curves or interrested in experimenting around a little.
Enjoy!
====[ EDUCATIVE INTRO ]====
At a time when making books was a very time-consuming and labor-intensive process, an increasingly literate 12th-century Europe required more and more books. To keep up with the increasing demand for the spread of literature was a ongoing struggle. Writing materials such as inks, dyes and parchment were very expensive. And it wasn't until the 15th century, when parchment was largely replaced by paper, along with the arrival of the printing press, for it to gradually became cheaper, faster and less labor-intensive.
So it made perfect sense to find other ways to help with this process.
Simplifying a script and cutting back on the decorative calligraphy was the most effective way of doing this.
This led to the development of simplified variations to pre-existing bookhand scripts. One of such forms is littera textualis, categorizing within the Textualis/Textura or simply Gothic bookhand scripts group.
Littera textualis is the simplest and least calligraphic form of textualis. It was developed with just two main goals in mind, to save time and costs. The simplified letterforms could be written much quicker than the more calligraphic and luxurious variations. It offered a more cost effective and faster version to the script. It was often used for less important literary works and academic papers.
It functioned as the standard bookhand script in the Netherlands during the 14th & 15th centuries.
====[ ABOUT THIS FONT ]====
TEXTUALIS BATAVICUM - A calligraphic inspired Blackletter/Gothic bookhand script. Essentially a Textualis/Textura inspired work.
The design mainly follows the concept for a traditional form of littera textualis bookhand script as was described in the intro written above.
It remains a work in progress and I will add update info for this font in the comment section bellow.
Some character still need slight adjustments, but so far I am very pleased with the result. As you can probably notice, the uppercase characters have slight more weight than the lowercase has.
More characters follow soon.
I hope y'all like it