120980
Published: 24th July, 2008
Last edited: 24th July, 2008
Created: 24th July, 2008
Moseopolitan is a simple first time font. I think my favorite part about it is the lack of curves and how they are interpreted as diagonal edges.
190982
Published: 2nd January, 2009
Last edited: 19th January, 2009
Created: 4th October, 2008
This is my first font created here.
I tried to build the font only with straight lines and no curves. Small letters are only 6px X 6px and large letters are 8px X 10px. Diagonals play a very important role in the construction of each letter. Also diagonals are more thick than the horizontal and vertical lines if you notice. So I named it Diagonal Knife. I tried to keep the font as simple as possible using minimum number of horizontal, vertical and diagonal lines. Tried to keep the corners of the letters little blunt instead of very sharp.
Suggestion, Criticism, Appreciation are welcome. If you like the font or have any advice or request please do comment.
You can check my photography and design portfolio at http://www.redbubble.com/people/reactdevelopers
70700
Published: 13th June, 2009
Last edited: 19th June, 2009
Created: 13th June, 2009
work for college - check my works in http://www.flickr.com/photos/rob-nova
411639
Published: 30th July, 2009
Last edited: 30th July, 2009
Created: 30th July, 2009
A work in progress...
An attempt to construct upper and lower case using only a square and intersecting diagonals.
Some characters are repeated and others tenuous, so suggestions always welcome...
5184516
Published: 4th March, 2010
Last edited: 1st December, 2009
Created: 29th November, 2009
Hours of brickstacking :). Lowercase and digits will be added soon, it's
really difficult to make any character without copying. These letters were
inspired by shapes, that are being cut from colorful paper.
5036612
Published: 2nd September, 2010
Last edited: 5th September, 2010
Created: 2nd September, 2010
Just messing around with the new pieces. Hardly legible or cryptic I should say.
1901565
Published: 25th January, 2011
Last edited: 29th January, 2011
Created: 16th January, 2011
Condensed typeface based on a sort of rhombic pattern counterbalanced by a strong emphasis on the vertical.
As computed by fontstruct, letter-size is roughly 3/4 of common definitions, which means that you have to set Sycamore to e.g. 24pt if you want to achieve a 18pt impression.
Also available in Light style.This is a clone of Sycamo Light
110350
Published: 15th October, 2011
Last edited: 3rd November, 2011
Created: 15th October, 2011
The idea of this typeface is that none of the sides/edges are allowed to the facing directly (mirror image) opposite which is the top right corner.
271294
Published: 31st October, 2011
Last edited: 7th November, 2011
Created: 23rd October, 2011
Inspired by the word 'dangerous' I have created a fontstruction based upon voodoo, ouija boards and back words writing. The font tends to include different shapes for instance 'crosses', some of these shapes have been inspired by typeface designer, Rudolf Koch 'book of signs'.
100273
Published: 8th November, 2011
Last edited: 13th November, 2011
Created: 26th October, 2011
This is a typeface based on a theme of reflection for a project on the BA(hons) graphic design course at UWE. It's based on the reflection used in comic books. With a use of thick and thin diagonals to create a reflective effect.
40682
Published: 26th December, 2011
Last edited: 27th December, 2011
Created: 24th November, 2011
simple thick letters, using diagonals and round ends, and dots for middle lines. good for posters.
91404
Published: 24th July, 2012
Last edited: 24th July, 2012
Created: 24th July, 2012
For those who want the "Tilting 5x5" even more tilted, you had come to the right place. (:This is a clone of 5x5 StandStill
180582
Published: 30th October, 2012
Last edited: 27th November, 2012
Created: 26th October, 2012
This is a typeface based on the word dynamic, I looked into electricity, and thought that circuit boards would be a great sector to look at. Using parallel lines and consideration of the way the type flows.
2201022
Published: 18th May, 2013
Last edited: 18th May, 2013
Created: 14th May, 2013
Font design I've been working on at the moment. Far from perfect, I'm still tinkering with letters to try and get the balance right. Work in progress.This is a clone
1811025
Published: 18th March, 2013
Last edited: 1st August, 2013
Created: 17th March, 2013
Experimenting with the previous design Geo5x5 Round Slice 6 Final (sorry for long title, I've not really thought of a name as it was just for my record), by scaling the characters to a larger size.This is a clone of Geo5x5 Round Slice 6 Final Pattern 2
150841
Published: 1st February, 2014
Last edited: 2nd February, 2014
Created: 10th December, 2013
The first font I every made. Tried to get creative by combining grid based fonts and the feel of old German Fraktur fonts. I am always open for feedback!
40991
Published: 24th February, 2014
Last edited: 24th February, 2014
Created: 23rd February, 2014
Regular version of DiagThis is a clone of Diag Thin Condensed
241732
Published: 14th May, 2014
Last edited: 14th May, 2014
Created: 14th May, 2014
This is my first font. It's a simple font that is monospaced using a grid of only 4 by 4 pixels, and only squares and diagonals. The result was a futuristic font that looked surprisingly good given the parameters. It's capitols and lower cases are the same, it does have #s, but only typical puntuation besides that... sorry. I'll revise it and add lowercase if anybody downloads. This would be a terrible font to type in a bunch in because it's not the easiest to read, but it would be cool for a futuristic looking title. Anyway just want to see if anyone would like the font, you are obviously interested as you're reading the description (or just extremely bored)
1432152
Published: 7th November, 2014
Last edited: 20th November, 2014
Created: 4th November, 2014
A futuristic font meant for titles.
CHANGE LOG:
11/7/14 - Finished Capitals
11/10/14 - Slight changes to letters B, P, and R.
11/12/14 - Finished Lowercase
Slight change to G and H
11/13/14 - Changes to E, F, I, J, L, M, T, W, X, r, and t. Y Redone
11/14/14 - Finished Basic Latin
11/17/14 - Slight Change to T
Began More Latin
11/20/14 - Finished More Latin
190970
Published: 10th February, 2015
Last edited: 10th February, 2015
Created: 9th February, 2015
This font is based off my Kaztora Logo font, but with more letters, and it's usable anywhere (the K no longer has a tail).This is a clone of Kaztora Logo
100671
Published: 31st March, 2015
Last edited: 31st March, 2015
Created: 31st March, 2015
Inspired by DICE's font and nature, I have assembled a somewhat modern-type font that looks great for small text and titles. Although this font is not able to be cloned or edited, it is free to use anywhere as long as there is credit. This font is not completely finished, so some symbols are missing, but most are rarely used anyway.