Version 2.6
*
Inspired by a comment by jonrgrover.
I built diamonds sized according to the Fibonacci series, then made a segmented display out of them. The design was then carved away to make the glyphs you see here. I used the members 1, 2, 3, 5, and 8. These sizes proved most feasible to work with in this sort of arrangement.
I gave the terminals a flared appearance which I think makes the glyphs look slightly Celtic. The design also makes me think of beach sand and things found on the beach - shells, pretty rocks, and so on.
The Zephiest of designs - a gaggle of Roman columns with gongs stacked on them.
Experimental 24-segment display or massive monochrome Mondrian matrix. Pixel compatible!
The thinking behind this one was that with incongruously sized segments arranged in the proper way, I would create a design which was effectively 5x5, but which accomodated more glyphs than 5x5 usually does. Negative space is incorporated into the structure of many glyphs, though not enough to classify this as an IVO design.
"Qualtron" is the name of an imaginary entity that a friend believed in - a being meant to represent the result of "a mathematical equation that can rule the universe". I didn't inquire further about it... :D
*
Design Rules:
1. Segments can have interior length/width of 2 or 5.
2. The central 2x2 square must always remain open.
3. Square bricks and 90-degree angles only.
*
Original size: 20.75pt (use multiples of this value for pixel perfection)
The new Eyeball Kids™ from Pixel Kitchen® are the best way to get your child interested in experimenting with eyeballs. Color 'em! Italicize 'em! Throw 'em into oncoming traffic! Abuse 'em all you want because EYEBALL KIDS ARE ETERNAL.*
! ! ! DO NOT FEED EYEBALL KIDS AFTER MIDNIGHT ! ! !
* - Eternal under normal use conditions. See the enclosed manual for terms.
Version 1.5
*
A font made in the proto-calligraphic style I invented and used when I was a teenager. I haven't owned a nibbed pen since those days, so this font is as far as the style was ever allowed to evolve. It's somewhat lacking the handwritten character my writing had, but this regularity is the result I was trying to achieve. I had no particular use in mind for the style other than titling documents. For that reason I consider this to be a Headliner.
"I" is kerned to itself so that it can be used to make nicer-looking Roman numerals.
*
See also:Basalt Pixel
SPOOKY GHOST FONT. A work in progress. Getting the right spooky apparition look is pretty intensive, but I managed to finish the basic character set before Halloween. :D
*
This started as a 5x5 design. After realizing S and Z would look far better if I made them 1 square taller, I converted the whole font to be roughly 5x6. At this low resolution, it's hard to get the degree of irregularity which I think makes these letters look ghostly... but, the idea is certainly present!
This design seems like it'd fit in with a lot of horror and science fiction stuff, too. Apart from the "smoky"/"ghostly" look, it has a "melted" one which suggests a hot place or maybe immersion in acid. It also looks a bit like slime, and finally at smaller sizes it has a glitch-esque appearance.
Version 1.5
*
3x3 slab serif. This is based on Wallerton, Anachronistic Gunslinger, an IRC-based "TV show" which I used to write and produce. All the characters in the show were my AIs pretending they were cowboys.
Well, I managed to successfully produce a lowercase for this one!
Recommended: Use with kerning.
An avantgarde serif with a mild horror theme. It takes advantage of the properties of antialiasing/text smoothing algorithms to render a convincingly handmade aesthetic.
Making attractive, consistent, nonpixel serif designs at this grid size is quite a challenge. Making them look handmade is even moreso. I've tried that many times, but this design is the first such one I felt was truly usable. It doesn't quite look typewriter-esque, but blends well with other designs that are.
For this I used many different serif shapes, with each one depending on how the line it was attached to wanted to bend or terminate. This is in contrast to most other serif designs I've seen, in which the serifs themselves are more consistent in shape. I decided against faux-bezier curves for this, because they all looked way too polygonal. I think this is one of few cases where a rectangular O and S enhance the overall design rather than weakening it.
A semibold Gongclonker made to the same specs as the original - 5x5 with no wasted matrix.
This is a clone of GongclonkerVersion 1.5
*
Experimental slab-serif. The added height from the serifs is quantized so that the serifs, rather than the normal lines, determine a glyph's geometry.
It reminds me of the Wild West and the old cartoon "The Jetsons" at the same time. It uses two kinds of serifs: normal slabs and "hangover" serifs. The hangovers are the ones that look like overhangs. Is there another name for them? I don't know.
This font is set to appear in several games at once! I'm not the developer of any of them! WOO
Despite what you may have heard, a "hoedown" is just a party.
A combination of many small disparate elements. Like "Space Wham" it tries to harmonize angles and curves, but it does it by letting complementary glyphs have them as opposed to using them both in a given glyph. I broke this rule to make "Marrada Angle", though.
This is a cloneVersion 1.1: KRX were modified to be more readable at small size, MQW14'"@ were edited for style, Basic Latin band completed, More Latin band underway.
*
A font made by request for an author of custom Warhammer 40K modules.
Version 1.1: Several glyphs (BKMRWXkmwx38&{}µÆæß³Œœ™) were edited for readability and þ was edited to distinguish it from Þ.
*
A font made for a friend's board game!
This gives me a strong "film credits" feeling with its high impact and simple geometry.
Iteration 4: Basic Latin kerning finished.
*
DOODLE DOODLE DOODLE!
*
Design Rules:
1. Letters with spurs will have the spur begin at the baseline. This provides the distinctive "high heeled" look.
2. Any letter whose traditional design has a straight vertical line on its left side will keep the line, no matter how the lines of the actual letter travel.
A font which uses some custom macaroni bricks. This one has the same kind of structural asymmetry as Phenomenologist. Angles and corners on the left are almost always sharper than those on the right, which gives glyphs a structural asymmetry as well as a sense of rightward momentum. This technique also imparts variation to some otherwise very similar letterforms (bdpq, mw, sz).
This is named for a species of android from Doctor Who.
*
Other design decisions:
- Make the ascender height shorter than the uppercase
- Use squares for dots/diaresis and circles for punctuation, so that they are more quickly distinguished
- Allow the sharp curve and gentle curve to swap positions when it's beneficial to the glyph (BX8&)
- Incorporate angled lines into several glyphs so that none of the glyphs which have them seem out of place (SZsz012569*~$)
- Ignore the other design decisions for glyphs which need a standardized look due to their use in programming and other syntax-based forms of writing (most symbols & punctuation)
V0.2.6: Finished Cyrillic.
*
A small scale faux-bezier design with a cutout-esque look. It offers different advantages at different sizes. Most glyphs are legible down to 4pt.
As this design evolves, it gives me an increasing "board games" feeling. This design seems very well-suited for board game parts, especially cards and smaller plastic pieces.
*
This has a few notable design features:
- Asymmetry helps keep letters like bdpq from being confused for one another
- Serifs and flags accomplish the same thing for groups of similar letters such as ce and ftſ
- Semiserif style helps reduce the need for kerning to almost zero
- Simplified polygons and counter shapes help pixel optimization
*
See also:Cartoon Riot
Semiserif semispur minimalism.
*
This design uses a few novel glyph-shapes and techniques to achieve its look. Most notable of these is the serifed a which lets the serif protrude to the right. I avoid this feature in almost all designs, especially pixel fonts, because it adds an unnecessary 1px of spacing - but for this font, the feature can be included without changing anything for the worse. Many other glyphs have this same sort of protruding serif/spur, and the slanted geometry of the serifs/spurs affords them a look that "retreats" from neighboring glyphs, rather than seeming to protrude into them.
Iterated version of an unreleased design called "Midnight Oil". It's also slightly related to Dethzmezenger and Gehenna.
I went against a few of my own conventions for this one. The close spacing might look a bit strange at times, but it eliminates the need for kerning while also creating a unique look. The overlapping spurs make me think of thorny plants!
This is an original design, but it does make me think of Planescape: Torment when I look at it, thus the name!
Fontstruct's first vacuum tube font!
This is a design inspired by Nixie tubes. Since these "tubes" are iconographic, they could theoretically represent 12AX7s, 6L6s, KT88s, or whatever tube/valve you wanted. Feel free to clone and build on this concept.
Another of my many doodles. Fun to make!
Finally, a design where all the diacritics blend in and look natural!
A design that looks like a top-down view of ziggurats!
I composited the diacritics so they'd fit into place, but this means that most anything non-English needs to be pretty large to be unambiguously read...
For my 300th Fontstruction, a more open and airy deco style than those I usually make. It has a strong sense of the "negative space has been sliced out" look about it which I tend toward in an art deco design.
Even though this is legible at a small size, I consider it a display font since many of its details are subtle. In retrospect I think this looks slightly Broadway-ish... but, this was just my attempt at a 5x5 deco.
"Gongclonker" is my nickname because I am a gong player.
An experiment in subtle asymmetry (it's most evident in the upper case).
*
Version 1.7 (14Sep2018) - ExtL-A added, GFB completed, Greek started
Version 1.6 (18Aug2018) - Changed name from "RC Badwolf" to "Badwolf"
Version 1.5 (15Aug2018) - altered 2357,ð
Version 1.4 (14Aug2018) - altered space width and mw
*
See also:Navajo Deco