A variant of Bulwarx Pixel which uses halftones to save 64% more ink than the original.
The second halftone is 60*60 (3600px) within a 100*100 (10000px) canvas. So, this halftone fills only 36% of the grid square, and yet it remains solid-looking even at 2x Original size. I think this is therefore the best single halftone on FS for actual printing purposes. Of course, modern printers are likely to be accurate enough to print this with the grid squares showing...
This is a clone of Bulwarx PixelA pixel demake of Bulwarx. The original design was so close to being Pixel Optimized that I decided to go ahead and make a version that actually is.
I decided to make this version the same size as the original in order to preserve the ratios. This means that the font is very similar at small sizes, and sacrifices only a few corners/angles in exchange for superb crispness.
The original diacritics had to be reworked, as well... this makes the font effectively taller than original Bulwarx, but it couldn't be helped.
This is a clone of BulwarxPixel demake of Arizone Unicase. Same glyphs as the original.
A space-esque design made for a friend! The angular counters give this a simplified geometry which makes it easy to read despite its looks. Works well for small- or large-scale applications - chat, terminals, logos, and more. Supports Dutch, English, and Greek!
The original was cloned off and preserved elsewhere. The version you see here has centered glyphs.
Version 1.1
*
An alternate take of Diamond Eyes with circles replacing the 2 smallest diamonds. No brickswapping used - many diamonds shared bricks so I had to place the circles by hand. This permutation introduces more texture, solidity, and complexity to the original. Hope ya like it!
This is a clone of Diamond EyesVersion 1.3: Added Polish.
*
This font used to be a normal Decolike... until someone decided to chow down on it! They seemed to prefer the taste of spurs, as all of them have been bitten off, leaving only semicircular impressions.
"Nervousa" is an anagram for "Ravenous".
Version 1.0
*
A slightly quirky font made to be good for chat and marquee display. The global matrix is 8 pixels tall. This works well for IRC clients, MUD clients, and so on. Supports Dutch, English, and Greek!
*
Original size: 6pt
A variant of Marrada with more angles.
Usually with designs I try to make every part look like it "belongs" with the others as opposed to trying to make each part look its best. With Marrada, I struck a balance between the two. Q1@*&{} are probably the best examples of this sort of balance...
This is a clone of MarradaA combination of many small disparate elements. Like "Space Wham" it tries to harmonize angles and curves, but it does it by letting complementary glyphs have them as opposed to using them both in a given glyph. I broke this rule to make "Marrada Angle", though.
This is a cloneBy request, a skewed, spooky sans-serif.
"Xenopyre" is an anagram of "Pyroxene", in much the same way as this design is an analogue of Basalt.
*
See also:Basalt, Dethzmezenger
When life gives you halflemons, make Halfade!
*
This is what I call a Plain Spurless design. There are no actual spurs, only right-angled corners to suggest spurs. All lowercase letters are like this except r, which is a Rounded Spurless because it needs to curve to avoid looking like Γ, and because it's only 2 bricks wide so there's no other place for it to curve.
I made this to have mostly right angles, to have a condensed look (see filrt), and to be good for speedreading. My own experiments in speedreading favored glyphs with simple curves which don't terminate in small arcs (see CGJSZfgjrsyz@()[]{}). There are exceptions (c2369?$) because these are more recognizeable when they have such arcs. Additionally, glyphs such as BPRXY have slightly rounded counters near the vertical center, which enhanced their readability without causing them to look out of place.
The remainder of design considerations were things which are fairly idiosyncratic and unlikely to be discovered by others. For instance, the descender of Q is 2 bricks, while lowercase letters' descenders are 3 bricks and symbols' descenders are 1 brick. This is the result of a technique that attempts to visually codify different cases & types of glyphs. The slightly different contours thus formed by each word on its underside seem to enhance both readability and aesthetics.
Version 1.1: Added Polish.
*
A combination of deco, sci-fi and modern elements.
This was made to be a compact subheader font and to be used alongside fonts such as "Badwolf". In fact the original name of this font was "Chibi Wolfclan".
A font inspired by the use of eggplants in video games. Many video games have unexpected eggplants in them. This is FontStruct's unexpected eggplant.
I decided to fill in the lowercase to add some variety. Hit SHIFT for shiny glyphs.
*
See also: Spellforged Servitor
A continuation of ideas in Candylander Plain. Half-arcs couple with short ascenders and descenders to make this.
A multi-outline design with intentional aliasing.
At the original size, it looks nicely textured. The illusions become more harsh as one zooms in.
*
Original size: 12.75pt (use multiples of this size for pixel perfection)
Version 1.3: Added Polish.
*
Another asymmetrical sans-serif made for use in rulebooks for the Freeform Limitless Adventure Kit (FLAK) pen-and-paper game system. This one is classed as a hybrid and works well at all point sizes!
It began as a Constant Height design, but now I don't classify it as such since most of the letters with diacritics are taller than those without. A few letters (eszett, thorn, eta, etc.) are allowed to descend slightly, as well.
This font has also found some use on signage at a friend's bistro!
Font from the ingame marquee display of Barcade Brawl, a 2015 game by yours truly. This was made to look similar to the system fonts from old arcade boards, PC microsystems, etc. You've probably seen the fonts I'm talking about; they're everywhere and many people refer to them singularly as "the arcade font" or "the NES font".
This is 7x7 with no wasted matrix, but it looks better without monospacing since not every glyph is the same width. It also makes a decent terminal & chat font, at least for those who don't care about the case of the messages they read and write.
Feel free to use this in your games, etc.!
*
Original size: 5.25pt (use multiples of this size for pixel perfection)
Experimental sliced sans serif. My goal here was to make a design which would result in an extremely compact and durable physical stencil. Almost all of the sharp points and acute angles are within the negative space, so it should be easy and very safe to make, handle and work with this stencil.
*
Version History
1.3 - added More Latin and Google Fonts Basic bands.
1.2 - added uppercase, changed name to "Aegris Stencil".
1.1 - edited for more readability at small size. Glyphs with enclosed loops were altered so that the "movement" of the segments always runs clockwise.
1.0 - released.
Version 1.1: KRX were modified to be more readable at small size, MQW14'"@ were edited for style, Basic Latin band completed, More Latin band underway.
*
A font made by request for an author of custom Warhammer 40K modules.
Version 1.1: Several glyphs (BKMRWXkmwx38&{}µÆæß³Œœ™) were edited for readability and þ was edited to distinguish it from Þ.
*
A font made for a friend's board game!
This gives me a strong "film credits" feeling with its high impact and simple geometry.
A "Connect bricks" font.
It's called linestrider because the outline strides across the inline on both sides. It also reminds me of the courses that are drawn for line-following robots.
The person I made this for requested lowercase. I'll add it as I can.