SymbioticDesign | FontStruct

47 101048 Published: 23rd August, 2013
Last edited: 23rd August, 2013
Created: 19th August, 2013
LICENSE STIPULATIONS: ===================== 1. Not to be used for, in the execution of, during or in the planning of a crime. The original artist does not contribute to moral stupidity. 2. If shared, distributed, and/or redistributed, it should be as the original archive, with all the files available, complete and intact. 3. Not to be sold, ever, alone or as a part of a larger collection without the expressed written consent of all the authoring parties. 4. License Stipulation for this Font Concerning Modifications: Furthermore, the modification, adaptation, appending, alteration and enhancement of this font are allowed as long as the 2 joined DP Trademarks remain complete, unaltered and intact within this font as the 2 replacement characters in the Specials group letter set. HISTORY: ======== This is a pet project I have been mulling over for quite some time. This is how I used to design my posters in high school, with overlapping print. I think I got in this habit after checking out one of those "Keep On Truckin'" Posters. Of course, these were done in sort of a balloon style, and that's what I would do as well. As p2pnut points out, this was a Robert Crumb inspired font. Though it is different from what he did, it is my goal to eventually make one similar to his cartoon type. So it will probably take a couple tries for Me to get it just right, but I don't think this is a bad start. There are, of course, some special challenges associated with doing this kind of thing that the pen easily makes up for. I decided to use some faux shadowed edges to allow the underlying character to work with the overlap of the F, P & R. As I am sure you can tell, the first letter of every word should be capitalized. Then, all the other letters in that word should be lowercase unless there is some punctuation such as a hyphen or apostrophe that will break the letter connectors. So of course you would then have to capitalize the following letter and can then go from there with lowercase until the next word (or word break). This one will be share/use/modify Freeware that retains my Copyright as the original artist once I release it. August 21st, 2013: OK, Getting ready to release it as Creative Commons Attribution Share-Alike Freeware (maintaining My Copyright). Clone it, alter it, modify it, add to it, subtract from it. Come up with a better and-sign, etc... Added both parenthesis, the capital O with a slash through it, and a pretty horrific and-sign. Everything but my 2 logos (sitting in Specials as replacement characters) was intentionally done as an outline font (using the tools available in the FontStructor, of course). I think this one is actually quite usable for some 70's style posters and projects, though it remains a work in progress as I might add some more shadowing as a part of the theme. I've tried it out at very small and think it is still legible as a 12 pixel font, though I would really recomend keeping it big and then have fun coloring in the letters. Although not quite a full Basic Latin Letter Set, the main characters are there, plus I threw in a ©, TM, TEL, and SM. Added the Registered Trademark Symbol. Decided to take on the shading and made it a sort-of isometeric 3D font. August 22nd: Still finishing the shading. Alright, at first I kept everything very legible. But as I did, I lost that overlapping effect. But this font isn't meant for 12 pixels. It's meant for poster headlines. So I skinnied it up a bit, making the lowercase letters look more like they are resting underneath the previous letter. When you print the word "Little" (as an example) it is still legible, but a little cryptic at the same time. All the isometeric 3D shading is fauxed in. That is, I had to play with the shading in order to make this work. Sometimes the shading is at one angle, sometimes another. Sometimes the shading goes on too far (in the P, p F, f) just to give the next letter a place to connect to, a place to rest under. August 23rd: Renamed to "70's Style Overlap 3D" and edited the underneath shadow of the bottom plane of the top of the curl of the question mark. Updated my logos to reflect the style of the font. I think I'll stop messing with this one now unless someone sees something that needs to be addressed. Feel free to download, clone, modify, etc. Just be sure to give me credit for what I did. I would appreciate it if my logos remained in tact, there are all sorts of other places to put your logo as a contributing author/designer/artist. Thanks for your support!

Creative Commons

14 11973 Published: 7th February, 2019
Last edited: 7th February, 2019
Created: 3rd February, 2019

Clunkier clone of Ambin Mono (early development stage), 'Free for Personal Use' Demonstration version of Amblin Mono. Copyright Doug Peters 2018 & 2019. No Commercial Use. No Derivatives Allowed.

This is a clone

Monospaced

Creative Commons

16 171034 Published: 26th September, 2018
Last edited: 10th March, 2019
Created: 14th June, 2014

Attempt at making a compact font that relied on angles. Not done yet, but have a basic character set and will move on to something else for a while.

Copyright Doug Peters (https://www.Doug-Peters.com or https://Dougs.Work) 2019 and released as an OFL Freeware font & web font (#webfont). You are entitled to use this font however you want (personal or commercial use). Credit for my original work IS greatly appreciated. Donations are greatly appreciated and I will send a thank you font package to donators.

Categories: Angular/Angled, Novelty.
Type: Sans Serif.
Weight: Bold.
Web font: Yes.
Commercial use: Any use, yes!
Derivatives: OK (please use a different reserved font name).
Redistribution: Encouraged.

P.S.:
Font-Journal:
https://www.Font-Journal.com
My best web hosting solution:
https://HDWebHosting.com
Blog:
https://Worthful.com

PayPal donations (to encourage my continued freeware font design efforts):
https://paypal.me/sitedesigner

Open Font License

11 23001 Published: 31st March, 2020
Last edited: 4th May, 2020
Created: 31st March, 2020

https://www.Doug-Peters.com
https://Dougs.Work
https://www.Font-Journal.com
https://Worthful.com
https://W3N.US/DPFonts
https://www.Domainance.com
https://shop.DomainHostmaster.com
https://HDWebHosting.com
https://SiteHostPros.com

This is a clone of Astrok Outline FS

10 33402 Published: 31st March, 2020
Last edited: 3rd May, 2020
Created: 23rd March, 2020

https://www.Doug-Peters.com
https://Dougs.Work
https://www.Font-Journal.com
https://Worthful.com
https://W3N.US/DPFonts
https://www.Domainance.com
https://shop.DomainHostmaster.com
https://HDWebHosting.com
https://SiteHostPros.com

10 22991 Published: 2nd April, 2020
Last edited: 4th May, 2020
Created: 1st April, 2020

https://www.Doug-Peters.com
https://Dougs.Work
https://www.Font-Journal.com
https://Worthful.com
https://W3N.US/DPFonts
https://www.Domainance.com
https://shop.DomainHostmaster.com
https://HDWebHosting.com
https://SiteHostPros.com

This is a clone of Astrok FS

8 4792 Published: 10th June, 2018
Last edited: 31st March, 2020
Created: 22nd May, 2018

Rules of Aximen font design project:

1. All letter characters and numerals must incorporate a section of the staff (any part of it, the staff is fully represented by the I).

2. Norse Futhark usually used a vertical line at the top and bottom of each rune to show it's flow across a stone or woodworking, that would follow the contour of the media. This means that no character can share the base line, nor can it share a part of the top line (as it's complete design, if sharing a guideline, would effectively disappear, like an L with an underline at the baseline would look more like an I). These are immaginary lines in uppercase, but the same glyphs will be used in lowercase which will offer a lowline directly below and sharing the base line at the top edge, as well as a top line at maximum character height where the bottom edge will share the top line (top of character boundry).

3. Accented characters will show accents below the low line or above the top line and the appropriate top or bottom edge of these lines will act like character boundry. In the uppercase register, these accents must mirror the placement of the lowercase, even though the low/top lines are immaginary.

4. Extra points for incorporating more of the staff into the actual character design. The staff line itself (again, represented in the I) represents the line used between characters in some Futharc runes.

5. Alphanumeric characters should represent modern letters and numbers, but not look modern. But, they do not have to look like runes, either. Yet, they should still be readable, though not necessarily well adapted to speed reading scanning of normal letter shapes. No character need to comply with Summer Institute for Linguistics standards, guidelines or rules, and the characters that bend such rules the farthest are considered the best.

6. Each character should be taken indivually as if the only design problem. Individuality and uniqueness of each character is prized well above unity as a typeface. Diversity, even of style througho0ut the same character set, is encouraged and applauded.

Open Font License

17 332222 Published: 2nd April, 2018
Last edited: 13th January, 2019
Created: 31st March, 2018

An original Art font that uses the tops, bottoms & sometimes middles of a font to communicate the character. This requires users to read texts as opposed to scanning them, but because visual cues are available it is still legible.

This font is Copyright 2018 & 2019 Doug Peters ( https://www.Doug-Peters.com/ or https://Dougs.Work/ ) and released as freeware under the SIL Open Font License. You are entitled to use this font however you want. Credit for my original work IS greatly appreciated.

Categories: Abstract, Art, Logotype, Poster/Display & Novelty
Type: Sans Serif Stencil
Weight: Heavy/Black
Web font: Yes
Commercial use: Any use, yes!
Derivatives: OK (please use a different reserved font name & update docs).
Redistribution: Encouraged

Fontstruct is this font's development home, though if development is occuring simultaneously, the available font may have a few errors as I work things out:
https://fontstruct.com/fonstructions/show/1509250
Short Link: https://w3n.us/blownoutdev

The official documented release font archive is on Font-Journal:
https://www.Font-Journal.com/fonts/13444/blown_out.php
Short Link: https://w3n.us/blownout

Submitted to Google Fonts April 10th, 2018:
https://github.com/google/fonts/issues/1528
Short Link: https://w3n.us/1528

P.S.:
Font-Journal:
https://www.Font-Journal.com
My best web hosting solution:
https://HDWebHosting.com
My branding & marketing Co.:
https://www.SymbioticDesign.com

PayPal donations (to encourage my continued freeware font design efforts):
https://paypal.me/sitedesigner

Open Font License

42 333674 Published: 27th July, 2013
Last edited: 16th January, 2019
Created: 22nd July, 2013

Copyright 2013 to 2019 Doug Peters (https://www.Doug-Peters.com or https://Dougs.Work/), aka Symbiotic Design (https://SymbioticDesign.com/), all rights (including artistic & creative rights) are reserved worldwide.

Released as a freeware font under the condition that if you use the font the authoring font designer will be attributed at least once (on a website, blog or in social media) with an active hyperlink back to the font homepage, the designer's profile, or any one of his websites. No derivatives are allowed. See the included "license.txt" text documentation within the distribution archive for license specifics. If this font was not distributed with a "license.txt" that specifically describes a "FonStruct License", it is an incomplete and unauthorized version.

Get the original version (development version) of this font at:
https://fontstruct.com/fontstructions/show/853961/broadbill

If the development version here is being actively worked on, it may contain a few errors. You can get the last officially released version of Broadbill from:
https://www.font-journal.com/fonts/13107/broadbill.php
or use the short link:
https://w3n.us/broadbill

Designer's FontStruct profile:
https://fonstruct.com/fonstructors/595075/symbioticdesign
or use the short link:
https://w3n.us/sdfonts

Any hyperlink in this description is authorized as a back link. -DP

https://SymbioticDesign.com
https://www.Doug-Peters.com
https://Dougs.Work

PayPal donations (to encourage my continued freeware font design efforts):
https://paypal.me/sitedesigner

FontStruct License

4 1991 Published: 2nd April, 2020
Last edited: 21st April, 2020
Created: 1st April, 2020

https://www.Doug-Peters.com
https://Dougs.Work
https://www.Font-Journal.com
https://Worthful.com
https://W3N.US/DPFonts
https://www.Domainance.com
https://shop.DomainHostmaster.com
https://HDWebHosting.com
https://SiteHostPros.com

This is a clone of Cover-Ups & Lies_FS

4 52692 Published: 9th January, 2017
Last edited: 13th November, 2018
Created: 16th April, 2014
Clone of Cebrosys. Where Cebrosys was intended to be a bit consolidated, Cerebrosys is intended to be full width. That means I have to widen a few of the characters that I just got finished narrowing. ;) For the moment, this is sort of a back-up, or place-holder, as I continue to experiment with the original Cebrosys.This is a clone

12 19984 Published: 27th May, 2018
Last edited: 2nd June, 2018
Created: 27th May, 2018

My most recent debacle is no longer a tragedy thanks to Sed4tives (Thanks!). ;)

I made an extra long space in Specials so that the line height and/or leading would work out with the 2x2 blocks (at least, in Fontstruct previews).

The idea is to have a spinning ying-yang symbol as the pattern to qualify it as a counter. Plus, it's a container, using the negative space where the pattern is broken-up, to define the characters. I also used mini ying-yang symbols to round some of the edges, or perhaps to define a boundry that required it.

Monospaced

FontStruct License

4 1691 Published: 2nd April, 2020
Last edited: 1st April, 2020
Created: 3rd March, 2019

https://www.Doug-Peters.com
https://Dougs.Work
https://www.Font-Journal.com
https://Worthful.com
https://W3N.US/DPFonts
https://www.Domainance.com
https://shop.DomainHostmaster.com
https://HDWebHosting.com
https://SiteHostPros.com

This is a clone of TRE45ON_FS

Wip (104)

4 2701 Published: 9th February, 2017
Last edited: 11th February, 2017
Created: 8th April, 2014

Denial is a pixel based monospace bitmap outline font with a missing baseline outline and is created by, and Copyright 2018, Doug Peters of Symbiotic Design.
-Logos, graphics, web design, brand marketing, media, tech & consulting.

https://www.Doug-Peters.com/
https://Dougs.Work/
https://Domainers.Name/
https://DomainHostmaster.com/
https://Domainance.com/
https://HDWebHosting.com/
https://ServerDN.com/
https://SiteDN.com/
https://SiteHostPros.com/
https://www.Font-Journal.com/
https://Worthful.com/

Monospaced

Open Font License

28 81052 Published: 16th April, 2019
Last edited: 30th April, 2020
Created: 1st April, 2019

Created according to specific Design Rules (see the comments on the Fonstruct font development archive page).

Credit for my original work IS greatly appreciated (use any of the above links for attribution on your website, blog or in social media).

Donations are also super appreciated. PayPal donations (to encourage my continued freeware font design efforts) are the easiest:
https://paypal.me/sitedesigner

Style: Gothic.
Classified: Block.
Type: Blackletter.
Weight: Bold.
Web font: Yes.
Commercial use: No.
Derivatives: No.
Redistribution: Nope.

P.S.:
Font-Journal:
https://www.Font-Journal.com
My best web hosting solution:
https://HDWebHosting.com
Blog:
https://Worthful.com

Creative Commons

9 14153 Published: 7th May, 2020
Last edited: 6th May, 2020
Created: 18th April, 2019

Created according to specific Design Rules (see the comments on the Fonstruct font development archive page).

This is the commercial version of Diamond t Blackletter (the Pro version). Credit for my original work IS also greatly appreciated, though not required.

Style: Gothic.
Classified: Block.
Type: Blackletter.
Weight: Bold.
Web font: Yes.
Commercial use: Yes!
Derivatives: No.
Redistribution: Nope.

P.S.:
Font-Journal:
https://www.Font-Journal.com
My best web hosting solution:
https://HDWebHosting.com
Blog (under development):
https://Worthful.com

PayPal donations (to encourage my continued design efforts):
https://paypal.me/sitedesigner

This is a clone of Diamond t Blackletter FS

6 04153 Published: 7th May, 2020
Last edited: 6th May, 2020
Created: 22nd July, 2019

Created according to specific Design Rules (see the comments on the Fonstruct font development archive page).

This is the wide (extended) commercial version of Diamond t Blackletter (another Pro version, just wider). Credit for my original work IS greatly appreciated, though not required.

Style: Gothic.
Classified: Block.
Type: Blackletter.
Weight: Bold.
Web font: Yes.
Commercial use: Yes!
Derivatives: No.
Redistribution: Nope.

P.S.:
Font-Journal:
https://www.Font-Journal.com
My best web hosting solution:
https://HDWebHosting.com
Blog (under development):
https://Worthful.com

PayPal donations (to encourage my continued design efforts):
https://paypal.me/sitedesigner

This is a clone of Diamond t Blackletter Pro FS

19 81806 Published: 3rd July, 2014
Last edited: 7th November, 2019
Created: 2nd July, 2014

Restyled clone of Mothership (with no alternates so that this particular style edit is more solid). This one is intended to be used as an actual font, as opposed to simply recreating the logo (which is what the last two fonts I cloned this one from were about).

This is a clone of Mothership *FS

Creative Commons

21 291883 Published: 31st January, 2019
Last edited: 8th February, 2019
Created: 8th February, 2016

This is my own clone of the original version. It may look a little like my Kindegraf or Sketchy fonts, as it's my handwriting with a mouse, and I bet there isn't a lot of deviation there (with the handwriting) but it IS different. More characters would require more work. Happy to do it, but not for free.

Categories: Pixel font.
Types: Hand printed lettering.
Weight: Regular, Curly.
Web font: I don't think that would be a good idea, NO.
Commercial use: When Purchased.
Derivatives: NO.
Redistribution: NO.

https://www.Doug-Peters.com
https://Dougs.Work
https://SymbioticDesign.com
https://Worthful.com
https://Font-Journal.com

My best Domain Name registration service:
https://www.DomainHostmaster.com

My best cloud web hosting solution:
https://HDWebHosting.com

PayPal donations (to encourage my continued design efforts):
https://paypal.me/sitedesigner

15 21002 Published: 7th February, 2019
Last edited: 4th February, 2019
Created: 3rd February, 2019

"Discopatentiously Obstructivenating Free Demo" font Copyright 2016-2019 Doug Peters and is 'Free for Personal Use' only to demonstrate the full font from which this beast was cloned ("Discopatentiously Obstructivenating" which is also by me, Doug Peters, and I will continue to develop that version).

This is my own clone of the original version. It may look a little like my Kindegraf or Sketchy fonts, as it's my handwriting with a mouse, and I bet there isn't a lot of deviation there (with the handwriting) but it IS different. This free version almost has a Basic Latin character set. More characters would require more work, so any further development will require a purchase or donation. Happy to do it if anyone is interested in a more complete font, but not for free.

Categories: Pixel font.
Types: Hand printed lettering.
Weight: Regular, Curly.
Web font: I don't think that would be a good idea, NO.
Commercial use: NO. If you want a commercial version, let's talk commission.
Derivatives: NO.
Redistribution: NO.

https://www.Doug-Peters.com
https://Dougs.Work
https://SymbioticDesign.com
https://Worthful.com
https://Font-Journal.com

My best Domain Name registration service:
https://www.DomainHostmaster.com

My best cloud web hosting solution:
https://HDWebHosting.com

PayPal donations (to encourage my continued design efforts):
https://paypal.me/sitedesigner

This is a clone of Discopatentiously Obstructivenating *FS

Creative Commons

5 5550 Published: 4th April, 2020
Last edited: 18th April, 2020
Created: 3rd April, 2020

54 11980 Published: 6th June, 2018
Last edited: 6th June, 2018
Created: 22nd May, 2018

Just runes, here. For letters with numerals, puncuation and Futhark ruins, see my "Modern Futhark" font.

This is a clone

Creative Commons

3 01000 Published: 28th April, 2020
Last edited: 9th March, 2020
Created: 8th March, 2020

Gigantic was inspired by Giant. But it had a flaw, a blown-out brick. Gigantic 2.0 eliminates that brick with a much simpler design. This font also represents my initial very basic (mis)understanding of the power of the connect bricks, which I have grown to love and embrace, and yet still not able to completely grasp.

This is a clone of Gigantic Mono FS

Monospaced

0 5980 Published: 29th February, 2020
Last edited: 29th February, 2020
Created: 28th February, 2020

Damnit

Monospaced

Blownout Brick (1)

Some fonts you just can’t FontStruct.
Buy & download premium fonts on MyFonts.com

0 0980 Published: 1st March, 2020
Last edited: 29th February, 2020
Created: 29th February, 2020
This is a clone of Gigantic FS

Monospaced

25 101105 Published: 21st April, 2019
Last edited: 23rd April, 2019
Created: 20th April, 2019

Gothica Medieval was inspired by a font called Horde. That said, although the style is from Horde, this font is designed differently.

Type: Modern Gothic.
Classifications: Angled, Old Style, Medieval.
Weight: Regular.
Web font: Yes.
Commercial use: Yes.
Redistribution: Yes.
Derivatives: Yes (see license).

Donations are super-appreciated. Credit for my contribution to this work IS also greatly appreciated.

PayPal donations (to encourage my continued freeware font design efforts):
https://paypal.me/sitedesigner

P.S.:
Font-Journal (Freeware fonts for designers):
https://www.Font-Journal.com
Heavy Duty Web Hosting (Genuine cloud web hosting solution):
https://HDWebHosting.com
Domain Name registration:
https://www.DomainHostmaster.com (Wild West Domain Registry)
https://www.Domainance.com (Directi's 'Public Domain Registry')
Fonts and graphics blog:
https://Worthful.com

Oh yeah, I design logos, websites, graphics, ads, marketing campaigns, PCs, and just about anything, really. -DP

Creative Commons

13 211037 Published: 20th March, 2014
Last edited: 9th March, 2019
Created: 25th February, 2014

Derived from the 26 Letter 'Caps Only' "Ogon Alpha" font by Electrica.

Categories: Monospaced Gothic Sans.
Types: Modern, Deco, Goth, Logotype, & Novelty.
Weight: Bold.
Web font: Yeah, sure.
Attribution: Required.
Commercial use: Yes.
Clonable/Derivatives: Yes.
Redistribution: Yes.

https://www.Doug-Peters.com
https://Dougs.Work
https://SymbioticDesign.com
https://Worthful.com
https://Font-Journal.com

My best Domain Name registration service:
https://www.DomainHostmaster.com

My best web hosting solution:
https://HDWebHosting.com

PayPal donations (to encourage my continued design efforts):
https://paypal.me/sitedesigner

This is a clone of Ogon Alpha

Monospaced

Creative Commons

19 62062 Published: 2nd July, 2018
Last edited: 17th January, 2019
Created: 1st July, 2018

Design rules:

Use 'gentle' curves.
All ends are rounded caps.
Never allow paths to cross or to touch.
Define letters & symbols in as few lines as possible.

Copyright Doug Peters (https://www.Doug-Peters.com & https://Dougs.Work) 2018 & 2019. Released as an SIL Open Font Licensed freeware font (& web font).

I wound-up with sort of a neon light font. Use, study, modify, create derivatives (use a different reserved font name & update docs) and/or redistribute this rounded line font. I hope you enjoy it.

Some of my business websites:
https://Worthful.com
https://Worthful.net
https://www.Font-Journal.com

Encourage my continued freeware font design work with a donation:
https://paypal.me/sitedesigner

Monospaced

Open Font License

15 91491 Published: 16th April, 2019
Last edited: 5th May, 2019
Created: 24th August, 2018

Irix was inspired by a font I lost track of, so I wound-up doing something else.

Copyright Doug Peters (https://www.Doug-Peters.com or https://Dougs.Work) 2019. This quirky, wacky font is released as CC0 Freeware. Donations are super appreciated (but not required to use this font). Credit for my original work IS also greatly appreciated.

Style: Rounded.
Classified: Condensed.
Type: Sans-Serif.
Weight: Bold.
Web font: Yes.
Commercial use: Yes!
Derivatives: Yes.
Redistribution: You betcha.

P.S.:
Font-Journal:
https://www.Font-Journal.com
My best web hosting solution:
https://HDWebHosting.com
Blog:
https://Worthful.com

PayPal donations (to encourage my continued freeware font design efforts):
https://paypal.me/sitedesigner

Creative Commons

21 113834 Published: 28th April, 2019
Last edited: 28th April, 2019
Created: 14th January, 2019

Derived from Chisato by Zephram.

Although Zephram's work is no longer apparent here, it exists in the underlying compressed letter forms and shapes of most of the characters that inspired me to give it a twist and make it monspaced with tapered ends.

Donations are super-appreciated. Credit for my contribution to this work IS also greatly appreciated.

Type: Monospaced Sans.
I guess I would classify this one as: Casual, Condensed.
Weight: Regular.
Web font: Yes.
Commercial use: Yes!
Derivatives: You betcha.
Redistribution: Anywhere.

P.S.:
Font-Journal (Freeware fonts for designers):
https://www.Font-Journal.com
Heavy Duty Web Hosting (Genuine cloud web hosting solution):
https://HDWebHosting.com
Domain Name registration:
https://www.DomainHostmaster.com (Wild West Domain Registry)
https://www.Domainance.com (Directi's 'Public Domain Registry')
Fonts and graphics blog:
https://Worthful.com

PayPal donations (to encourage my continued freeware font design efforts):
https://paypal.me/sitedesigner

Oh yeah, I design logos, websites, graphics, ads, marketing campaigns, PCs, and just about anything, really. -DP

This is a clone of Chisato

Monospaced

Creative Commons

3 8932 Published: 9th March, 2020
Last edited: 20th March, 2020
Created: 9th March, 2020

'Knot_Cartoon' font Copyright 2020 Doug Peters of Symbiotic Design, all rights reserved worldwide, including artistic and creative rights. Work In Progress (will require Glyphs or other pro font editor to finish).

3 01000 Published: 19th March, 2020
Last edited: 20th March, 2020
Created: 19th March, 2020

This is a clone of Knot Cartoon FS

SymbioticDesign, FontStructions

70's Style Overlap 3D *FS

Amblin Mono Free Demo *FS

Anticipatio *FS

Astrok FS

Astrok Outline FS

Astrok Rounded FS

Aximen FS

Blown Out *FS

Broadbill *FS

Cats & Rats FS

Cerebrosys *FS

Contain Yourself *FS

Cover-Ups & Lies_FS

Denial *FS

Diamond t Blackletter FS

Diamond t Blackletter Pro FS

Diamond t Blackletter Pro Wide FS

Dirigible *FS

Discopatentiously Obstructivenating *FS

Discopatentiously Obstructivenating Free Demo

Dream Crush FS

Elder Futhark *FS

Gigantic 2.0 FS

Gigantic FS

Avenir Next®

Gigantic Mono FS

Gothica Medieval FS

Gothina *FS

Humbell *FS

Irix *FS

Jonarun FS

Knot Cartoon FS

Knot FS

Personal URL	https://www.font-journal.com/
Fontstructing since	29th March, 2012
Fontstructions	75 shared, 2 staff picks
Shared Glyphs	17543
Downloads	1245 downloads made of this designer’s work
Comments Made	1019