Here is my go on Schindler’s new “Thin LED” font which they use for FI GS 100 and 120, and also newer Linea 100 (for 5500). Most characters in this font pack are 4x7 in dots, but some of them are 5x7 (The actual LEDs do that for some reason). There is also the exterior indicator’s large arrows, and also the small arrows used on the Landing Operating Panel’s indicator. There is also a medium sized arrow used for the COP indicator whenever the lift stops. These are all obtainable by using the special brackets. Enjoy the font!

This is the font used on some Schindler lifts with S-Series fixtures, and they do look really weird. This is because this type of indicator has a limited number of LEDs unlike the full 5x8 LED which is also used on M-Line. Watch mrmattandmrchay's video about this: https://youtu.be/RsPrH0eojiY . They could have done something to the numbers to make them look better, especially 2 and 3. I have added some extra FI-MXB/V arrows in case anyone needs it. I have also added in Up/Down arrows when the lift stays idle. The three new arrows could be obtained by using =, \, and | (the weird long divider stick that looks like an “I”). It is normally coloured green, but in rare cases they have it coloured red. You could do anything to the colours of this. Enjoy the font!

Just a basic OTIS Dot-Matrix LED font used on Japanese OTIS Gen2 Lifts. It could be coloured in Orange (Default) or White, but after downloading, this font is yours so you could do anything you like to it. There are three different arrows on this one: Default, Long and Custom. All are obtainable by using the special brackets which could be found directly on your keyboard. IMO this font is very similar to Schindler’s Thin LED; some are 4x7, some are 5x7. Enjoy the font!

This is the font used on Schindler lifts with original M-Line indicators. This font is also used on S-Line 2nd Generation. Though it is not used on FI MXB as that has it’s own separate 5x9 font. I have added extra arrows to this one for S-Line and FI MXB in case any of you need to use it. As always, it is obtainable by using the special brackets. I have also added extra 1/4 and 1/2 characters but that doesn’t exist in real life (Obtainable by using PowerPoint’s Insert > Symbols > Special Characters > {Choose special character}). Enjoy the font!

This is my version of Mitsubishi’s small LED Dot-Matrix font which they use for three-digit numbers and characters. It it 3x7 in dots which fits perfectly onto the 10x7 display. Sadly, FontStruct doesn’t not allow me to make the signature Mitsubishi arrows, so I made a similar one instead. I sincerely apologise for the inconvenience. Other than that, the font pack looks fine and very similar to the real one. I have also added extra arrows in like the old handicap panel arrow that they use on the 1st and 2nd generation fixtures (obtainable by using special brackets as always). Enjoy the font!

This is my go on the Mitsubishi Dot-Matrix LED font which is still being used nowadays. I think it is pretty accurate enough, but sadly FontStruct doesn’t allow me to make the signature Mitsubishi arrow. I sincerely apologize for that. Normally the colour is orange, but feel free to change things up whenever you wish. I have added the 1/2 into this font pack, it is obtainable by using the special characters chart in PowerPoint once you have clicked into the “Symbols” button inside the “Insert” section. Enjoy the font!

This is the KONE KDS font which is primarily used on KDS-D20, D40, 50 and 300. Somehow, KSS-470 also uses the same font. It is not used on KSS-280 and KDS-330 because they use the newer Segment LCD display. I know KDS-330 also has the dot-matrix version but it uses the KSS font instead. The arrows (and custom arrows too!) are obtainable by using the different types of brackets as usual. There is also another font which I made that is the small version of this one used on some occasions like 3-digit numbers or “out of service”. Enjoy the font!

This is the Toshiba LED font used in newer Japanese Toshiba lifts. The LED is usually orange, but you could use any colour on it as you please. Also, I have added some additional custom arrows in case you might need some difference. The arrows could be obtained by using the different types of brackets as usual.

I’m not really a fan of this font because I think the text on the indicator is too “stretched out” and quite ugly. I still made it anyways in case you guys might need it :)

This is the font for newer asian thyssenkrupp that use the square dot-matrix indicators. The old round font will come later. Again, the arrows are different by the type of special brackets you use. Keep in mind that there are two types of arrows – one normal and one German style used on StepModul fixtures.

I won't do the lower case since it is pointless.

Bug fixed and modfied some of the characters.